sheet metal working used for sale (3,336)

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

Deep Drilling Machine brand Buck Year of construction 2000

Inv. Num. : 8956 Type: Easy Cut 6001.20PG Producer: MicroStep Created: 2006 Parameters: Control system: MSNC 500 Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 38 mm Plasma source: Formica 163 W Machine weight: 2700 kg

Key data: 1020 mm, 2 mm

with bending rail 10 and 19 mm, additional segment insert for the upper beam (segment height 60 mm) and Material thickness adjustment, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: green Machine weight: 350 kg Opening width: 150 mm Bending angle (max.): 130 degrees Machine number 16/9

Key data: 1020 mm, 2 mm

with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010

Key data: 1020 mm, 1 mm

3-roll round bending machine, with wire inserts, seam groove, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness max. steel: 1.25 mm Colour: green Weight: 220 kg Dimensions: 1290 x 600 x 1050 mm Number of round rollers: 3 pieces Roller diameter: 55 mm Machine number 1685

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

Belt width 1,500 mm. Strip thickness 0.5 -3.0 mm, coil weight 7 to. Longitudinal cuts 4 pcs., straightening rollers 7 pcs., coil inside dia. 508 mm, coil outside diam. 1,600 mm Facility consists of: Decoiler Pallet truck Pressing arm Overflow table Straightener Longitudinal shears Cross shears Scrap Wrapper Side table

Belt width 1,500 mm, strip thickness 0.5, - 2.0 mm, coil weight 7 tons, straightening rollers 7 pcs. , Longitudinal sliced 4 x , Coil inside diam. 508 mm, coil outer diam.1,600 mm

Strip width 1,500 mm, strip thickness 0.5-1.5 mm, coil weight 10 tons. Longitudinal sections 4, straightening rollers 7, coil inside diameter. 508 mm Coil Outside Diam. 1,600 mm

Key data: 28 t, 1000 mm

Hydr. CNC Press Brake BOSCHERT Type Profi 28 CNC with various bending tools Weight approx. 3000 kg

Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail and machine in top condition Weight: approx. 3000 kg

DURMA TP9 turret punch press was built in 2007 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, distinguished by its high efficiency, is an excellent choice for precision machining of sheet metal with a maximum thickness of 6 mm. The machining process is performed fully automatically by means of a reliable work head operating with a maximum force of 20 tonnes. A 27-station turret cooperates with the head, capable of storing a large number of tools of all sizes and types. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. The table is also equipped with clamps, responsible for holding the material securely during machining. The offer also includes equipment consisting of, among others, an intelligent SIEMENS CNC controller and new and slightl ...

ECKERT Opal WaterJet CNC waterjet cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for precision machining of a wide range of materials, i.e. metal, stone, wood and plastics. Workpieces with a maximum thickness of 150 mm are machined by means of a reliable cutting head with anti-collision and tool height sensor. During cutting, only water is used, making the process free of harmful fumes and safe for the environment. The ECKERT Opal WaterJet is distinguished by its robust water table with a double WEMA grating system. The design made of closed steel profiles ensures high stability during even the most intensive challenges. All travel components, in turn, are protected by bellows covers. This solution guarantees uninterrupted operation of the machine for many years of use. The ECKERT WaterJet is operated via a state-of-the-art industrial co ...

sheet width: 3240 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 3,00 tdimensions of the machine ca.: mManual and automatic bending operation possibleBending angle adjustable via potentiometerUpper beam stroke height and material thickness selectable via DIP switchesBending rail and machine in excellent conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 34 mmsquare edge steel: 30 x 30 mmL-beam: 100 x 10 mmflat steel: 100 x 14...160 x 11 mmblade length: 175 mmT-beam: 100 x 10 mmnotching: l + T material: 10 mmhole punhing press: pressure: 45 tthroat: 305 mmtotal power requirement: 3 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 0,8 x 1,5 m 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch 2 foot switches contact limit stop various punching saddles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26046 Technical data: - 2 mot. Driven rollers - Manual. Lining of the upper roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 88 - 108 mm - Bending capacity approx. - Flat steel 50 x 8 mm - Square 20 mm - Round tube 42 mm - Drive 380 V / 0.55 kW - with: - Right / left – run - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

sheet width: 2040 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,30 tdimensions of the machine ca.: mManual and automatic bending operation possibleBending angle adjustable via potentiometerUpper jaw stroke height and material thickness selectable via DIP switchesManual backgauge with spring fingersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6000 mm, 1 mm

Hydr. Long bending machine with roller shears with 9-fold angle control OP9, manual / automatic Double foot switch for upper beam, start bending beam Bending capacity 6000 x 1.25 mm Year of manufacture 1986, steering 1993 approx. 3000 kg

Mechanical hole punch with a punching force of 1000 kN. Tool holder for punches up to 90 mm can be mounted on request. A large assortment of stamps and dies is included in the scope of delivery.

Profile height 25 mm, with hydraulic transverse cutting device for short shares, with 45 degree transverse separation device for inclined coulters Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width: 250 - 870 mm Sheet thickness steel: 0.7 mm Sheet thickness aluminum: 0.8 mm Sheet thickness stainless steel: 0.5 mm Machine weight: 420 kg Dimensions: 1250 x 1470 x 1100 mm Total power requirement: 400 V Colour: blue Profile height: 25 mm Infeed width: 290 - 880 mm Roll forming speed :11 m/min Strip width: 290 - 880 mm

PLASMA CUTTING MACHINE Machine data Machine name plasma cutting machine Year of construction 2010 Condition Used Location Technical details Functionality fully functional Total weight 4,000 kg Cutting height (max.) 200 mm Input voltage 400 V Workpiece weight (max.) 3,800 kg Cutting current 280 A Sheet thickness (max.) 40 mm Sheet thickness steel (max.) 40 mm Table length 6,000 mm Table width 2,000 mm Working range 6,000 mm Description Plasma cutting machine with suction, dimensions 6000 x 2000mm Voortman VACAM VCS Thermo Plasma cutting machine Kjellberg HiFocus 280i Plasma gas control unit FlowControl 3 Cooling unit KWE 360 Cutting current 10 - 280A Smoke exhaust system Teka Filtercube 4 H Year of construction 06/2013 Filter inserts 4 Integrated blower Motor power 7.5KW The facility is in a 100% functional condition

Amada HFE 80-25 Year: 11/ 1999 Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 mot. adjustable back gauge Stroke: 200 mm Projection: 420 mm Crowning Working height: 960 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons

STIGAL VXstandard plasma cutting machine was built in 2020 in Poland by STIGAL Marcin Stępień. The machine, distinguished by its exceptional precision, is the perfect choice for thermal cutting of workpieces with a maximum thickness of 20 mm. The machining process is performed on a stable work table, whose open design offers free access to the workspace from all sides. The dust and gas extraction system (ECTS), which is integrated into the worktable, effectively removes contaminants generated during machining, providing a comfortable work environment. This is all complemented by a touchscreen operator panel with CNC control. The STIGAL VX-standard plasma cutting machine is offered with a reliable CEBORA plasma source of the highest energy efficiency. Technical specifications of STIGAL VXstandard plasma cutting machine - touchscreen operator panel with CNC controller - maximum shee ...

table width: 6000 mmtable length: 2000 mmburner heads: 1 Equipment:- Plasma source Kjellberg Hi Focus 161i- suction unit- CompressorTechnical dataKjellberg Hi Focus 161i plasma cutter:Cutting current at 100 % ED 10 - 160 AMarking current 5 - 25 ACutting range 0.5 - 50 mmPiercing up to 30 mmDimensions (L x W x H) 985 x 570 x 1140 mmMass 206 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 1500 - 3500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1400 mm/mintotal power requirement: 0,75 kWweight of the machine ca.: 2,5 tDimensions (LxWxH): 2,5 x 1,5 x 1,5 mRoller stand- Self-aligning- Forward/reverse rotation- New control system- Foot pedal- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,7 mmroll diameter: 50 mmDimensions (L/W/H): 1600 x 600 x 1500 mmweight of the machine ca.: 400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, its ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details.

This 3-axis Bodor P3015 was manufactured in 2019 and is a robust fiber laser cutting machine. It features a 1.5 kW fiber laser, capable of cutting a variety of materials including carbon steel and aluminum, with a cutting area of 3000 mm x 1500 mm. It includes a Bodor CNC control system and an exchange table. If you are looking to get high-quality sheet metal cutting capabilities consider the Bodor P3015 machine we have for sale. Contact us for more information.

This 4-axis Vimercati PHSI 100x3050 press brake was manufactured in 2005. It features a working width of 3050 mm, motor power of 9 kW, and a pressing force of 100 tons. The machine dimensions are 3500 x 2000 x 2700 mm, and it weighs 9700 kg. It includes a fully refurbished Cybelec control system. Consider the opportunity to buy this Vimercati PHSI 100x3050 press brake. Contact us for more information about this machine.