; Gross weight [kg]: 4000; Inspection Date: 2024-06-27; Amount of previous owners: 1; Maximum lift capacity [kg]: 225

; Gross weight [kg]: 6550; Rear tyres remaining: 100; Front tyres remaining: 100; Maximum lift capacity [kg]: 230

Year of manufacture 2007, 3122 h, working height 14.36 m, working range 10.78 m, platform dimensions: 0.91 x 1.83 m, platform capacity 270 kg, transport length: 7.57 m, transport height: 2.47 m, 6266 kg dead weight, newly painted

; Gross weight [kg]: 2170; Rear tyres remaining: 87; Front tyres remaining: 87; Inspection Date: 2025-01-13; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 220

Lifting height: ca. 8.500 mmweight: 1,3 ttable:: 2600 x 800 table load: max. 340 Kgweight: 1,3 tdimensions: 2,6 x 0,9 x 2,0 mWorking platform- Work platform 800 x 2600mm, extendable up to 3600mm- Protective grille- Operation via panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting height: ca. 4.500 mmweight: 1065 kgbattery: 24.0 V electric work platform like NEW with only about 10 operating hours ()Equipment:- mobile electric scissor work platform- for working at great heights- quick and effortless access to higher work areas- large work surface- electro-hydraulic lifting height adjustment (infinitely variable)- operation of the chassis + lifting frame effortlessly using a joystick alternatively from the ground- chassis offers high mobility and stability- charging cable included in deliveryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 3500; Accessories: Diesel-Motor; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 2800; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 3500; Accessories: Hatz Dieselmotor mit Ladegenerator 230V; Inspection Date: 2024-11-26; Amount of previous owners: 1; Lift height[mm]: 2800; Maximum lift capacity [kg]: 200

; Mileage [km]: 52000; Gross weight [kg]: 3500; Accessories: Kasperl (= Blink-Leuchte am Fahrerhaus); Inspection Date: 2024-02-28; Amount of previous owners: 1; Working width [cm]: 227; Lift height[mm]: 1570; Maximum lift capacity [kg]: 300

; Gross weight [kg]: 2450; Inspection Date: 2024-08-26; Amount of previous owners: 1; Lift height[mm]: 2300; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 2100; Inspection Date: 2024-11-05; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 2100; Inspection Date: 2023-12-16; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 1600; Inspection Date: 2024-11-26; Amount of previous owners: 1; Lift height[mm]: 1030; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 1975; Inspection Date: 2024-09-13; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 1950; Accessories: 230V Steckdose im Arbeitskorb; Inspection Date: 2024-07-02; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 3500; Inspection Date: 2024-04-15; Amount of previous owners: 1; Maximum lift capacity [kg]: 200

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtaper: BT 40 Internal cooling system: 7 barsize of pallet: 750 x 450 mmnumber of spindle speeds: 12.000 U/min/rpmSpindle power: 15 kwTools changer: 40 fach/toolscontrol: MAPPS III 3-axis vertical machining center with pallet changer-chip puller-CNC: MAPPS IIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3295 Teupen GT17H year/Year of construction 1996 2.2 t Lifting platform, load capacity 200 kg, lifting height 17 meters, with its own drive, TÜV was done in April 2024. Lifting platform, load capacity 200 kg, lifting height 17 meters, with own drive, MOT was done in April 2024.

Alimak TPL 1800 Transport Platform  Power consumption: 21kVA  Required construction security: 32A  Voltage/Frequency: 400 VAC/50 Hz  Conveying speed:  Transport platform (TP) 12 m/min  Material hoist (MH) 24 m/min max. height 100 m Payload 1800 kg Loading area length 4.4 m Loading area width 1.5 m Energy Source E Mast distance of connection 7.5 m Quantity 1 Brand ALIMAK HEK Type TPL 1800 Year of construction 2013 Serial number 50187 Capacity: 1800kg Weight 2100kg Overall dimension L 4400mm Overall dimension W 1500mm More items - new and used - can be found in our shop! International shipping costs on request!

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2015 Serial number 50386 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  You can find more transport platforms - new and used - in our shop! International shipping costs on request!

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2013 Serial Number 50138 Weight 1900kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  You can find more transport platforms - new and used - in our shop! International shipping costs on request!

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2014 Serial number 50229 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  More items - new and used - can be found in our shop! International shipping costs on request!

Used scissor lift Int. Art. Ref. m3459 Manufacturer: Haulotte Type Compact 8 Year of construction 2007 Batteries approx. 1.5 years old Dimensions (L x W x H): 250 x 80 x 200 cm Weight: 1.730 KG Operating hours: approx. 380 h Propulsion: Electric Platform height: 6.2 meters Working height: 8.2 meter Platform dimensions: 230x80 cm Expandable platform: 92 cm Max. platform load: 350 KG With intergr. Charger Location: 59425 Unna The machine can be viewed and tried out. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge  ...

Price on request!

x-travel: 3.000 mmy-travel: 2.500 mmz-travel: 2.475 mmw-axis: 800 mmrotary table: Juaristi MG-12 Rotary table surface: 2.000 x 2.500 mmT-slots: 11 T-slot - width: 170 mmtable weight: 8.000 Kgtable rotation: B- Achse – 0,001 °Control: HEIDENHAIN i TNC-530 diameter of quill: 130 mmspeed: 3.000 U/mintool taper: ISO 50 DIN 69871/1-B milling head: swivelling +/-: 2,5/2,5 Gradspindle drive: 30 kWtransmission ratio: 2 speeds:: 0-2.500 U/minboring spindle: D`ANDREA UT5-800-S mm/mindiameter: 800 mmcross travel: 250 mmTools changer: 30 pos.Internal cooling system: 20 barChip coveyor: Inkl. handwheel: HEIDENHAIN HR-420 weight of the machine ca.: 45 tdimensions of the machine ca.: 9800 x 7320 x 5500 m-TS-3 head, TS-5 column andlongitudinal bed INCLUDED:- Part touch probe RENISHAW RMP-60- External coolant- 20 bar Internal coolan- protecting guards- mobile operator platform for controlpanel- C ...

Year of construction 2012, 885 h, working height: 9.75 m, platform dimensions: L x W: 2.30 x 0.76 m, 2200 kg dead weight, 230 kg payload

Working height 11 m, working range 6.8 m, load capacity 230 kg, 350° swivel radius, with additional knuckle boom on the work basket 180°, jib vertical working range 144°, total width 122 cm, transport height 201 cm, transport length 574 cm, machine weight 7100 kg

x-travel: 500 mmy-travel: 400 mmz-travel: 330 mmControl: FANUC 31i-B5 Tools changer: 14 pos.table-size: 850 x 410 mmnumber of spindle speeds: 24.000 U/min/rpmrapid traverse feeds: 48 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 400 mmz-travel: 330 mmControl: FANUC 31iB5 table-size: 850 x 410 mm: 21 fachturning speeds: 10.000 U/minInternal cooling system: 20 bartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 450 mmz-travel: 35 mmControl: Heidenhein TNC 530 table weight: 200 Kg: Random 36 fachtool adaptor: HSK E40 turning speeds: 30.000 U/mintotal power requirement: kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.