used Water Jet Cutting Machines for sale

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

Inv. Num. : 7516 Type: 9XVD-55 Producer: Flow Created: 1997 Parameters: The machine is in good technical condition.

x-travel: 3000 mmy-travel: 4000 mmz-travel: 640 mmControl: Siemens Sinumerik 840D table-size: 3000 x 4000 mmswivelling +/-: 57 Gradtraversing speed: x-axis: 20000 mm/miny-axis: 20000 mm/minz-axis: 12000 mm/minpositioning accuracy: +/-0,1 mm/mrepeating accuracy: +/-0,025 mmtotal power requirement: 15 kWweight of the machine ca.: 4 tequipped with:- CNC Siemens control Sinumerik 840D,Handwheel and Siemens SIMATICS7-300 and SIMODRIVE 611, 1GB HHD Drive- Machine works with 2D cutting head- High pressure translator pump model 20 XD -55 (415Mpa, 75KW)- Paser 3 abrasive blast cutting system- Water softening dosing system- height sensor and collision monitoring for the 2D head,- Pneumatic tool clampingNew X-axis spindles in 2017New table support system 2017,Abrasive desludging system & new grease lubrication system 2017Operating hours approx. 16700hdismantled and storedThe data for this ad was c ...

Inv. Num. : 7371 Type: WMC2-4030 Producer: Flow Created: 2007 Parameters: Operating hours: 21000 h Work table length: 4000 mm Work table width: 3000 mm Cutting head: Paser ECL Equipment: Abrasive dispensing system Water supply Metallurgical material (10 tons) New Console Shelf Spares Replacement high-pressure pump (37 kW) 2017: new pump

Key data: 2000 mm, 3000 mm

Water Cutting Machine FLOW WMC2-DWJ3 Type: Flow WMC2-DWJ 3020-SCC-2P-DCF-LP-1xUP-100iD Year of construction: 2006 Working area: 2,000 x 3,000 mm, Pump: 6000 bar 2x cutting heads with angle correction. Digital drive system, Dynamic Waterjet Axis System, Precision mounting of the cutting head with quick-release device, PaserShield, FLOW abrasive jet cutting system PASER® – Dynamic Waterjet version, FLOW abrasive jet cutting head PASER ECL Plus, FLOW abrasive dosing system PASER, FLOW abrasive storage and conveying system PASER, FLOW WaterVeyor abrasive sludge removal system, tapping aid FLOW UltraPierce, and more. Machine Specification Gross workpiece support: X-axis: approx. 3,100 mm bridge Y-axis: approx. 2,100 mm base axis Net cutting surface with one cutting head: X-axis: 3,000 mm bridge Y-axis: 2,000 mm base axis Net cutting surface with two cutti ...

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle

x-travel: 4000 mmy-travel: 2000 mmz-travel: mm: 4000 bartotal power requirement: 35 kWweight of the machine ca.: tdimensions of the machine ca.: mMicroStep CNC water jet cutting system AquaCut-W 4001.20with the following features:• BFT high pressure pump ECOTRON ® 40.37• Desludging system (scraper conveyor) for a length of 4,000 mm• Water softening using water chemistry1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm}MicroStep® machine control with MML console and 24 touchscreenTwo LCD operating units on the portalLaser pointer with automatic offset transmissioniMSNC® module / expert systemiMSNC® module / assistant for service and maintenance workiMSNC® module / assistant for loading CNC programsiMSNC ® module / automatic calibration of mechanical scanningiMSNC® module / management of cutting programs (MRP}iMSNC® module / EcolnfoiMSNC® module / machine ...

Inv. Num. : 6683 Type: 1600 KOMBI Producer: NESSAP Generated: Parameters: Work table length: 3200 mm Work table width: 1600 mm Working speed: max 10 m/min High-pressure pump: FLOW SYSTEMS Number of axles: 2 Type: 2D Machine weight: 1800 kg Equipment: Software

Inv. Num. : 7139 Type: 2100 Kombi-V Producer: Nessap Created: 2002 Parameters: Control system: Nessap 16 Maximum cutting thickness: 100 mm Work table length: 3000 mm Work table width: 2000 mm Maximum operating pressure: 3200 at High Pressure Pump: Flow Systems Electrical connection: 380 V Equipment: WRYKRYS – Technology Program

WaterJet OMAX GlobalMAX 1530 was built in 2019 in the United States. This high-quality machine with an indestructible design uses reliable components and innovative jet cutting technology to guarantee clean and precise workpiece edges, regardless of the machined material. The OMAX water cutting machine was first commissioned in 2020 and has so far only worked for 260 hours. The GlobalMAX 1530 water cutting machine machines workpieces made of e.g. steel, glass and plastics on a large work table which maintains high stability even during the heaviest loads. The machine’s easy-to-reach design offers unobstructed access to a working area with a length of 3100 mm and a width of 1645 mm from all four sides, significantly facilitating the process of loading and unloading workpieces. All axes are equipped with innovative OMEGA DRIVE brushless servo motors with feedback loop, which minimise  ...

CNC control all-in-one control computer with screen Table dimensions: 4.9 m x 2.134 m Travel x/y/z 4,216 mm / 2,007 mm / 305 mm Repeatability 0.025 mm Dimensions L/W/H 4.9 m / 2.15 m / 2.7 m Machine weight 2.5 t

Key data: 13000 mm, 4000 mm, 1400 mm

High-pressure pump Hapro Technik SERVOJET 4000 (SJ30), Cutting thicknesses: Aluminium: max. 200 mm, Steel: max. 150 mm, Stainless steel: max. 120 mm, Wood: max. 130 mm, Glass: max. 100 mm, granite: max. 100 mm, Plexiglas: max. 30 mm, Cupid: max. 100 mm, Non-ferrous metals: max. 150 mm, Foams: up to 250 mm, Sandwitch materials: max. 120 mm, Rubber with steel inserts: max. 100 mm, Plastics: max. 120 mm (Machine is as good as new and still in its original packaging)

WaterJet STM MasterCut was manufactured in 2010 by the well-known Austrian company Stein-Moser GmbH. The machine performs precision machining of workpieces up to 180 mm thick using a pressurised water jet. The workpiece cutting process takes place on a large work area made of high-quality welded steel, with a length of 3000 mm and a width of 2000 mm, guaranteeing high stability and reducing the vibrations generated during machining. A modern CNC control installed in the control panel allows programming of the operating modes and full control of the machine. The STM WS3020 water cutting machine is equipped with a 37 kW BHDT HYTRON high-pressure pump, supplying the machine with high-pressure water. Technical parameters of STM MasterCut water cutting machine - working space (L x W): 3000 x 2000 mm - maximum workpiece thickness: 180 mm - positioning speed: 15 m/min - accuracy of po ...

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

Waterjet CLASSICA CL 610 was built in 2012 by Waterjet Corporation s.r.l. The machine allows to cut sheet metal with a thickness of 180 mm on a working area of size (L x W) 3400 x 2000 mm. The water cutting machine is controlled by a S 510 CNC controller and its total weight is 3000 kg. Technical data of the CLASSICA CL 610 water cutting machine - CNC control: S 510 - cutting area (length x width): 3400 x 2000 mm - maximum cutting thickness: 180 mm - accelerated feed: 0 – 30 mt/min - positioning accuracy: ± 0.075 mm - repeatability: ± 0,05 mm - dimensions (L x W x H): 4500 x 2300 x 1800 mm - weight: 3 000 kg