presses for wood used for sale (312)

\"Technical details Manufacturer: ITALPRESSE S.p.A. Model: XL/6 30-13 PM BO Type: Hydraulic hot press Year: 2017 Serial number: 191320317 Project number: 24465 Press configuration: 6-cylinder Press area: 3000 × 1300 mm Total installed power: 22 kW Supply voltage: 400 V Frequency: 50 Hz Phases: 3 + PE Full load current: 35 A Heating system: Thermal oil boiler Controller: MFD 80 digital control Construction: Hydraulic heated platen press Application: - Veneering panels - HPL laminate pressing - MDF lamination - Door production - Furniture component manufacturing - Wood panel bonding and pressing Dimensions: - Length: 3700 mm - Width: 1800 mm - Height: 2050 mm Weight: 5850 kg Certification: CE marked Condition: Used\" Auction-ID: A7-40556-5

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

Code: 0454 Brand: CASOLIN - ITALY Model: EASY - CE Standard Hydraulic automatic single-bar clamp press for window and door frames – CE Standard Technical data: Min/max working length mm 250/3000 Min/max working height mm 340/1900 Min/max nominal vertical thrust pressure 880/8800 kg Min/max nominal horizontal thrust pressure for cylinder 280/2800 kg Horizontal pistons stroke 200 mm Pump power 3 Kw Width of the bars 120 mm The upper mobile bar is guided through its its movement by a unit composed by 2 gears and 2 racks positioned on the rear of the machine The regulations of the oil pressure of the vertical and horizontal cylinders are separate and adjustable by through the use of two handwheels The lower press bar can work in 2 positions Control button panel in ergonomic position with pensile arm Overall dimensions mm 3870 x 1040 x 2900 h Overall dimensions f ...

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm

ATTENTION: The machine must be dismantled before transport out of the hall. For this, a larger forklift must be organized! Auction-ID: A7-48709-21

Laminating press manufactured in 2016. This MASTER PUR-1400 is a professional, high-performance laminating line designed for single-sided panel lamination using PUR Hot Melt adhesive. It features a working width of 1,400 mm and can handle maximum panel sizes of 2,800 × 1,300 mm. If you are looking to get high-quality laminating capabilities, consider the MASTER PUR-1400 laminating press we have for sale. Contact us for further details regarding this machine.

Code: 0448 Brand: KOLMAG - ITALY Model: PGP 80 Hydraulic cold press for panels, furniture, doors, joinery, composite materials and various: Technical data: Platens dimensions 2500 x 1100 mm N° 4 pistons Opening 310 mm Thrust 60 ton Motor 4 Hp Overall dimensions mm 3100 x 1150 x 1780 h Weight kg 2200

Frame press Italprasse SR 3/100 Working length 3000mm Working height 1800mm 3 vertical actuators 2 horizontal actuators Net price

Manni 2500×1300 veneer shelf press Shelf length 2500mm Shelf width 1300mm Load height 410mm Working pressure 300bar Press on 4 cylinders Net price

Shelf press for veneering SIPA 2500×1280 Shelf length 2500mm Shelf width 1280mm Load height 440mm Operating pressure 120bar Press on 4 cylinders Shelves heated with boiler water

Shelf press for veneering SIPA 2500×1280 Shelf length 2500mm Shelf width 1280mm Load height 440mm Operating pressure 120bar Press on 4 cylinders Shelves heated with boiler water

Briquetting machine PRODECO E 60 Super Vertical Briquette diameter 60 mm Max. briquette length 60 mm Motor power 5.5 kW Capacity 10/60 Kg/h Pressing force 900 kg/cm² Container dimensions 1600 x 1600 mm Supply Voltage 400V Dimensions 215x180x150cmH Weight 870 kg Year of manufacture 2019

Briquetting machine PRODECO E 60 Super Vertical Briquette diameter 60 mm Max. briquette length 60 mm Motor power 5.5 kW Capacity 10/60 Kg/h Pressing force 900 kg/cm² Container dimensions 1600 x 1600 mm Supply Voltage 400V Dimensions 215x180x150cmH Weight 870 kg Year of manufacture 2019

- Dimensions of the work table 1300 x 980 mm. - Maximum workpiece dimensions approx. 940 x 650 mm. - 3 positionable pneumatic clamping cylinders. - Portable, with wheels. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-20

Technical details Manufacturer: MUP Model: 600 Machine number: 2014-375 Type: Briquetting press Configuration: - Fully automatic hydraulic briquetting system - Integrated hydraulic oil tank - Hydraulic oil heater - Hydraulic oil cooler with fan - Hydraulic oil filtration system - Vertical pre-compression unit - Hydraulic pre-loader - Reinforced stainless steel hopper - Agitator with anti-bridging drive - Screw feeder with 1.5 kW motor - Chain drive feed system Hydraulic system: - Pressing pressure: 225 bar - Automatic oil level monitoring Electrical equipment: - Supply voltage: 400 V / 50 Hz - Installed power: 37 kW - Control voltage: 24 V DC - Siemens S7-1200 CPU 1214C PLC - Siemens TP700 Comfort operator panel - IP54 electrical cabinet - Emergency stop - Optical barrier for automatic start/stop Feed system: - Loading opening: 415 × 920 mm - Hopper: 920 × 920 × 800 mm (approx. 150 l) ...

working width: 1.250 mmworking length: 2.200 mmDaylight opening: ~ 350 mmJoos HP 80 hydraulic veneer press for gluing veneers, wood, beams, or other pressing tasks, equipped with electric heating plates.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Italpresse UT/6 hot press for finishing with the application of veneers of chipboard, plywood panels. MDF, solid or plastic laminates, whether or not for aluminium and other metals The press plates are solid perforated steel plates Table top size: mm. 3000 x 1300 Maximum opening mm. 400 Diathermic oil heating of the hobs with electric boyler complete with circulation pump Boyler da 27 kw - 380 V Selector switch for use 50% of the boyler power - 13.5 KW in the first position or 27 KW in the second position - Pressing time setting with automatic opening Max pressure 300 bar Exclusion of 2 side cylinders from the control panel Protection Mylar on the tops Machine dimensions: mm. 3700 x 1700 x H. 2100 Weight kg. 6600 Machine according to CE regulations

Laminating press manufactured in 2001. This WEMHÖNER KT-F-1E features a pressing area of 5,750 mm x 2,200 mm, with pressing plates measuring 2,600 mm and 2,620 mm in length. The machine accommodates thicknesses from 6 mm to 40 mm and operates at a pressure of approximately 40 kg/cm². If you are looking to get high-quality laminating capabilities, consider the WEMHÖNER KT-F-1E machine we have for sale. Contact us for further details.

used vacuum press with 3 paternoster magazines Brand: Wemhöner Type: Variopress - Basic Year of construction: 2018 Technical data Heating plate format (mm) 2850 x 1550 Electric heating plate design Aluminum heating plate top Total pressing force (kN) 2400 Chamber pressure max. (bar) 6 Operating temperature max. 180 degrees Celsius Batch or workpiece size max. (mm) approx. 2460 x 1180 Thermoplastic film in rolls Width of the film: approx. 1430 mm Thickness of the film (mm) approx. 0.25 - 1 Pressure chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls

Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

Capacity: 2 x 2.70 m.3 x vertical pushers2 x horizontal pushersPneumaticMobile

Capacity: 3000 x 1900 m.4 x horizontal presses2 x vertical pressure beamsHydraulic pump with 3 kW motor

Min/Max. workpiece length 1800 / 4200 mm.Max. profile height 200 mm.Min. Workpiece thickness 16 mmWorking height 950 mm.Power installed 12 kW

Working height 900mmNominal width 1300mmEffective working width 1270mmRolling pressure force max 40kNPassage height max 120mmFeed transport 6-50 m/min stepless/frequency controlledPlate width min 200mmPlate length min 1000mmPlate thickness min 3mmPower supply 2,2kWDrive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Electrical spindle drivemin/max furniture length: 20 cm / 2m50min/max furniture height: 20 cm /1m25max furniture width: 65 cmWorking height: 50 cmPressure horizontal and vertical: 0 - 1200 KpTotal power installed: 3 kW

Throughfeed carcase clamp Carcases:Width: 280 to 1320 mmHeight: 250 to 2800 mmDepth: 150 to 800 mm.Working height in the press: 500 mmMechanic clamping (electrical motors)

Press pressure: max 104 tworking length: ~ 3.100 mmWorking width: 4 x 240 mmworkpiece height max.: 490 mmWemhöner VS 4 S heavy-duty hydraulic strip or beam press for veneering strips, gluing wood, glulam beams, or other pressing tasks.The press has four independently controllable pressing surfaces.A glue applicator is also available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0422 Brand: VILMAR Model: 970 Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Work surface dimensions mm 970 x 500 Opening mm 350 N° 3 pistons Hydraulic power unit Overall dimensions mm 1630 x 1300 x 2100 h Machine to be reconditioned

Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Opening mm 400 Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar-coated platens Overall dimensions mm 3700 x 1850 x 2600 h