used CNC Pressbrakes for sale

Key data: 130 t

Inv. Num. : 8798 Type: TrumaBend V130 Producer: Trumpf Created: 1998 Parameters: Switch-on hours: 32217 h Compressive force: 130 t Stroke: 215 mm Machine weight: 11250 kg

pressure: 50 tchamfer lenght: 1270 mmdistance between columns: 1040 mmstroke: 215 mmthroat: 410 mmdayligth: 385 mmback stop - adjustable: 860 mmworking feed: 1 - 10 mm/secreturn speed: 135 mm/sectotal power requirement: 8,6 kVAweight of the machine ca.: 4750 kgdimensions of the machine ca.: 2000 x 2100 x 2400 mmEquipment:- Controlled axes: Y1, Y2, X, R- Pneumatic die shift- Manual upper tool clamping- LAN network connection- 4 stop fingers, manually adjustable, foldable to the rear, pneumatically clampable- CNC control, operation at front left- 2-hand operation/foot switch- 2-hand operation / foot switch- Rear + side protective deviceOperating hours: 2,140.9 hStrokes: 6,837,706The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 215 mmdayligth: 385 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10 mmNumber of working hours: 53.820 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 16.0 KVAweight of the machine ca.: 11250 kgrange L-W-H: 3640 x 2210 x 2375 mm- in checked condition - machine video -https://www.youtube.com/watch?v=23IbxRaZ2KAEquipment:- CNC electro-hydraulic press brake- including DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display tool & program library including new TFT-LCD industrial monitor- CNC controlled axes: Y1 + Y2 / X / R- CNC electro-motor / controlled back stop (X axis)- CNC electro-motor ...

TOSKAR MASTERFAB 3100-175 CNC hydraulic press brake was built in 2015 in Turkey by TOSKAR Makine Yedek Parça İmalat Ticaret ve Sanayi Ltd Şti. The machine, distinguished by its high efficiency and excellent precision, is used in economical sheet metal machining. The reliable hydraulic drive combined with a high press force of 175 tonnes ensures excellent bending results, even when machining the hardest materials. The working area, in turn, is protected by a laser safety system which automatically stops the machine if the laser beam is interrupted. All this is complemented by an advanced CNC controller with many useful functions. The MASTERFAB 3100-175 CNC press brake is offered with tooling in the form of punches and dies with a total value of approximately EUR 13000. Top tools: TOP135.85 R0.8 punch – L=360 mm TOP205.85.R4 punch – L=415 mm TOP205.26.R0.8 segmented punch � ...

pressure: 200 tchamfer lenght: 3600 mmdistance between columns: 2650 mmdayligth: 500 mmthroat: 300 mmstroke: 250 mmworking feed: 10,5 mm/secreturn speed: 100 mm/secram stroke speed: 150 mm/sectable height: 900 mmoil volume: 500 ltotal power requirement: 37 kWweight of the machine ca.: 17800 kgdimensions of the machine ca.: 3710 x 1800 x 3390 mmEquipment:- Controlled axes Y1 + Y2- Manual X-axis with digital position display- Set of upper and lower tools- 2x stop fingers- 2x front support arms- Hand and foot controls- Side + rear safety guard- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 50 t, 2000 mm

Inv. Num. : 8747 Type: ITS 5020 Producer: AMADA Created: 1991 Parameters: Operating hours: 9980 h Compressive force: 50 t Maximum bending length: 2000 mm Stroke: 105 mm Axis: 2 Back gauge: 600 mm Machine weight: 3450 kg Equipment: 2 foot pedals Prism

pressure: 110 tchamfer lenght: 4100 mmdistance between columns: 3100 mmdayligth: 425 mmthroat: 300 mmstroke: 225 mmworking feed: 10 mm/secreturn speed: 100 mm/sectable height: 900 mmoil volume: 260 ltotal power requirement: 11 kWweight of the machine ca.: 12000 kgdimensions of the machine ca.: 4400 x 1750 x 2500 mmEquipment:- Cybelec DNC 34 PC control system- Controlled backgauge 700 mm (X-axis)- Hydraulic tool clamping at the top- 2 support arms with sliding system- Upper tool- Lower tool- Side + rear safety device- 2 manual foot switchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

pressure: 135 tchamfer lenght: 3600 mmdistance between columns: 3150 mmthroat: 250 mmstroke of upper beam: 200 mmdayligth: 400 mmajustment speed: 70 mm/secworking feed: 10 mm/secreturn speed: 80 mm/sectable height: 915 mmtotal power requirement: 15 kWweight of the machine ca.: 8800 kgdimensions of the machine ca.: 4200 x 1700 x 2600 mmControl: Features:- ATL 550 control system- NC-controlled axes: Y1 + Y2 + X- Electric rear stop (X-axis)- Electric depth adjustment (Y1 + Y2 axis)- Manual crowning- Stop bar- 2x front support arms- Many upper and lower tools- Side + rear safety device- Foot controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8688 Type: Beyeler PR 150 IPC Producer: Bystronic Created: 2004 Parameters: Compressive force: 150 t Maximum bending length: 3100 mm Stroke: 215 mm Machine weight: 10000 kg Machine condition: out of order

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 255 mmstroke: 165 mmdayligth: 475 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/sectotal power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1500 x 2470 mmEquipment:- DELEM DA65 CNC control- Electric backgauge (X-axis), 600 mm- Hydraulic upper tool clamping- Front light barrier- Side and rear protective grilles- Manually adjustable stop bar, foldable (R+Z-axis)- Upper tool- 2x support arms- Machine feet- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JORDI PHE-30180 CNC hydraulic press brake was built in 2013 in Spain by JORDI UNIVERSAL V.S.L. The machine, designed for precision machining of sheet metal with a maximum length of 3550 mm, is an excellent choice for any industrial plant. The combination of a high press force of 175 tonnes and an extremely stable design guarantees the best bending results, even during the most intensive challenges. All this is complemented by an intelligent CNC control with all the necessary functions. The PHE-30180 CNC press brake weighs 11000 kg. Technical specifications of the JORDI PHE-30180 press brake - CNC controller: ESA 530 - maximum press force: 175 t - maximum sheet metal length: 3550 mm - maximum slider stroke length: 265 mm - distance between columns: 2600 mm - top tool weight: 55 kg - bottom tool weight: 66 kg - light curtains - foot switch control - oil tank capacity: 250 l - ...

pressure: 40.0 tchamfer lenght: 1550 mmdistance between columns: 1250 mmcolumn arm: 295 mmstroke: ca. 120 mmdayligth: ca. 355 mmtable height: 775 mmworking feed: 8.0 mm/secreturn speed: 100.0 mm/secControl: CYBTOUCH 12 oil volume: 100 ltr.total power requirement: 5.5 kWweight: 3250 kgrange L-W-H: 2.8 x 1.7 / 2.0 x 2.1 m- in checked conditions - machinevideo - https://www.youtube.com/watch?v=bpiHgz_jhIcEquipment:- CNC electro-hydraulic press brake- CNC CYBELEC control unit CYBTOUCH 12 Large touchscreen Hand-drawn drawing via Touch Profile function High-resolution screen Clear, easy-to-read menus in the operators language Tool & product library USB port for memory sticks Front left control panel, pivoting- CNC-controlled axes: Y1 + Y2 + X + R axes- CNC electro-motorized backgauge (X axis)- CNC electro-motorized height adjustment (R axis)- 2 manually adjustable stop fingers- AMADA/PROMECAM  ...

Bending force 60 ton Bending length 2050 mm Passage between uprights 1700 mm Stroke: 265 mm Table height 900 mm Machine width: 3200 mm Machine depth: 1800 mm Height: 2900 mm Weight 5600 kg Very well maintained, mint condition

pressure: 220 tchamfer lenght: 3720 mmdistance between columns: 3020 mmcolumn arm: 400 mmajustment speed: 125 mm/secworking feed: 10.0 mm/secreturn speed: 132 mm/secback stop - adjustable: 800 mmstroke: 275 mmdayligth: 550 mmtable height: 900 mmoil volume: 300 ltr.total power requirement: 18.5 kWweight of the machine ca.: 12800 kg.range L-W-H: 5850 x 2220 x 2820 mm Good condition Current new price approx. 100.000 euros Special price on requestFeatures:- Electro-hydraulic CNC press brake- With DELEM CNC control model DA 66W 2D graphic programming Automatic bend sequence calculation and collision detection High-quality color LCD screen (TFT) - Swivel control panel, front left- CNC-controlled axes: Y1 + Y2 + X + R + crowning - CNC electric motor-driven backgauge (X axis)- CNC electric motor height adjustment of the backgauge (R axis)- CNC electric motor-driven bending table crowning- 2x man ...

Inv. Num. : 8707 Type: TrumaBend V170 Producer: Trumpf Created: 2003 Parameters: Compressive force: 170 t Maximum bending length: 4080 mm Distance between frame walls: 3680 mm Stroke: 365 mm Machine weight: 18000 kg

pressure: 80.0 tchamfer lenght: 2550 mmdistance between columns: 2130 mmcolumn arm: 420 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/secstroke: 200 mmdayligth: 470 mmtable width: 60.0 mmtable height: 910 mmNumber of working hours: ca. 21.576 htotal power requirement: 9.0 KWweight of the machine ca.: 5750 kgrange L-W-H: 3100 x 2180 x 2540 mm- In inspected condition - Machine video - https://www.youtube.com/watch?v=k_pjAfjm-BoEquipment:- CNC electro-hydraulic press brake - CNC control OPERATEUR for 8 axes X1+X2, Y1+Y2, R1+R2, Z1+Z2- CNC-controlled backgauge adjustment (X1+X2 axis)- CNC-controlled vertical adjustment of the stop fingers (R1+R2 axis)- CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis)- CNC controler with new screen- 1x freely movable two-hand control & 1x foot switch- Tool upper wedge crowning - TYPE AMADA- Various insert too ...

Key data: 80 t, 2550 mm, 2050 mm

Safan CNCS 80-2550 - Hydraulic press brake - Incl. various bending tools - Year of construction 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Projection: 250 mm - Passage: 2050 mm - Stroke: 140 mm - Stop time: 140 ms - Stop travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

pressure: 170 tchamfer lenght: 4080 mmdistance between columns: 3680 mmcolumn arm: 410 mmdayligth: 385 mmstroke: 215 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 200 mmtable height: 1050 mmNumber of working hours: 25.430 hoil volume: 350 ltotal power requirement: 29 KVAweight of the machine ca.: 16.450 kg.range L-W-H: 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4Equipment:- CNC electro-hydraulic press brake/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tool and product library Graphic 2D programming Automatic bend sequence calculation and collision detection Emergency stop button at front - CNC  ...

Key data: 100 t, 3000 mm

Multi axis - Servo electric

pressure: 170 tchamfer lenght: 3170 mmdistance between columns: 2700 mmcolumn arm: 420 mmdayligth: 470 mmstroke: 200 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/sectable width: 180 mmtable height: 960 mmoil volume: 235 L0: 300 barcontrolled axis: 6 AnzahlNumber of working hours: 29.400 htotal power requirement: 16.5 KWweight of the machine ca.: 11910 kgrange L-W-H: 4025 x 2020 x 2900 mm well-maintained condition () with only approx. 29.400 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=APP0HZjMms4Equipment:- electro-hydraulic CNC press brake- AMADA CNC control OPERATEUR 2 - 6 axes (X, Y1 + Y2, R, Z1 + Z2) swiveling operation - front left tool & program library- CNC-controlled back stop adjustment (X-axis) adjustment range .. 700 mm- CNC-controlled vertical adjustment of the stop fingers (R-axis) adjustment range .. 25 ...

AMADA APX 80-25 CNC hydraulic press brake was built in 1996 in France by AMADA EUROPE S.A. In August 2025 an inspection was carried out by the manufacturer’s service, during which filters and hydraulic oil were replaced. The machine, designed for machining sheet metal with a maximum length of 2505 mm, is distinguished by its high precision and reliability. The press force of 80 tonnes, combined with an extremely stable design, guarantees the best bending results during even the most demanding challenges. The multi-axis back stop with independently controlled fingers, in turn, allows each finger to be controlled separately in the left-right and front-back directions and together in the up-down direction. All this is complemented by an advanced CNC control with an intuitive interface and all the necessary functions. The APX 80/25 CNC press brake weighs 4400 kg. Technical specificat ...

pressure: 180 tchamfer lenght: 3110 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/secback stop - adjustable: max. 750 mmstroke: 260 mmdayligth: 460 mmtable height: 880 mmoil volume: 210 ltr.operating pressure: max. 240 barcontrol: DELEM total power requirement: 15.0 kWweight of the machine ca.: 11.200 kg.range L-W-H: 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on requestFeatures:- Electro-hydraulic CNC press brake- With DELEM CNC control model DA 66W” 2D graphic programming Automatic bend sequence calculation and collision detection High-quality LCD screen (TFT) Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning- CNC electric motor-driven backgauge (X axis) with 2x manually adjustable stop fingers- CNC electric motor height adjustment of t ...

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 200 mm/secwork speed: 12.0 mm/secreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 15.0 kWweight: 10800 kgrange L-W-H: 5100 x 2100 x 2850 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A- with additional cro ...

LOIR SAFE PHSL CNC PRESS BRAKES Year of construction 1999/2023 (cnc renovation) Control : Step Automation RK15 Max. bending force: 630 t Usable bending length: 6050 mm Projection: 500 mm Engine power: 47 kW Total weight : 58t approx.

pressure: 225 tchamfer lenght: 3050 mmdistance between columns: 2550 mmcolumn arm: 300 mmajustment speed: 110 mm/secwork speed: 9.0 mm/secreturn speed: 130 mm/secwork stroke: 240 mmdayligth: 320 - 560 mmtable height: 1000 mmtable width: 200 mmoil volume: 350 ltr.operating pressure: max. 296 barair pressure: 4.5 - 6.0 barvoltage: 400 Volttotal power requirement: 18.5 kWweight: 14900 kgrange L-W-H: 5180 x 2400 x 3100 mm- in checked condition - machine video -https://www.youtube.com/watch?v=ebbbzSYMxKwFurnishing:- electro-hydraulic CNC die bending/press brake- CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library- CNC-controlled back gauge adjustment (X-axis) Stop range X axis of bending line ..  ...

BAYKAL APHS 31440 CNC hydraulic press brake was built in 2020 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, designed for machining sheet metal with a maximum length of 3100 mm, is distinguished by its high precision, efficiency and reliability. Throughout its entire service life, the machine was used for only 43 hours. Thanks to full electronic synchronisation with proportional valve technology, the installed CNC control constantly monitors and corrects the parallelism of the beam. The use of this solution maximises the accuracy and repeatability of the bending workpieces. The workspace, in turn, is protected by the FIESSLER AKAS laser safety system, which automatically stops the machine if the laser beam is interrupted. All this is complemented by a design made from high-grade ST44-2 steel, which maintains maximum stability during even the most intensive challenges. ...

pressure: 85.0 tchamfer lenght: 2050 mmdistance between columns: 1750 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/secback stop - adjustable: max. 600 mmtable width: 120 mmwork height max.: 1050 mmNumber of working hours: 28.500 hoil volume: 200 loperating pressure: 340 bartotal power requirement: 14.0 kVAweight of the machine ca.: 9050 kgrange L-W-H: 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition () with only approx. 28.500 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=ZuwyPKJSYLwEquipment:- CNC electro-hydraulic press brake- including DELEM CNC control swiveling control panel at the front left- CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning- CNC electro-motorized back stop (X axis)- CNC e ...

BAYKAL APHS 31120 CNC hydraulic press brake was built in 2020 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, which is designed for machining of the sheet metal with a maximum length of 3100 mm, is distinguished by its high reliability, efficiency and precision. Thanks to full electronic synchronisation with proportional valve technology, the installed CNC control constantly monitors and corrects the parallelism of the beam. The use of this solution ensures maximum bending accuracy and repeatability during even the most intense challenges. To increase operator safety, the workspace is protected by the FIESSLER AKAS laser safety system, which automatically stops the machine if the laser beam is interrupted. All this is complemented by a high-quality design made of ST44-2 steel, with no cavities for minimum deflection under full load. The APHS 31120 CNC press brake is of ...

pressure: 85.0 tchamfer lenght: 2050 mmdistance between columns: 1650 mmcolumn arm: 400 mmstroke: 240 mmdayligth: 320 - 560 mmajustment speed: 150 mm/secworking feed: 15.0 mm/secreturn speed: 150 mm/secback stop - adjustable: 5.0 - 1000 mmtable width: 110 mmwork height max.: 1050 mmoperating pressure: max. 297 barcompressed air: 4.5 - 6.0 baroil volume: 200 loperating pressure: 340 bartotal power requirement: 7.5 kWweight of the machine ca.: 5900 kgrange L-W-H: 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=ikl6RNZWeiUEquipment:- CNC electro-hydraulic press brake- including CYBELEC CNC control swiveling control panel at the front right external screen- CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning- CNC electro-motorized back stop (X axis) Trave ...

Key data: 300 t, 3000 mm

Inv. Num. : 8595 Type: CNC HAP 30300 Producer: DURMA Generated: 2000 Parameters: Control system: DNC 880S Compressive force: 300 t Maximum bending length: 3000 mm Lifting height: 245 mm Weight of the upper tool: 55 kg Reduce tool weight: 310 kg Number of strokes: 3 1/min Machine height: 3100 mm Machine length: 4550 mm Machine width: 2400 mm Machine weight: 16000 kg

pressure: 45.0 tchamfer lenght: 2050 mmdistance between columns: 1600 mmcolumn arm: 300 mmstroke: 150 mmdayligth: 395 mmajustment speed: 100 mm/secworking feed: 1-10 mm/secreturn speed: 70,0 mm/sectable width: 60,0 mmtable height: 905 mmoil volume: 150 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 5,5 KWweight of the machine ca.: 3500 kgrange L-W-H: 2900 x 2100 x 2420 mm good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=f0lMBgZD1VUFurnishing:- DELEM CNC control model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library including new screen (installed 11/2023 .. 1.200 euros)- CNC controlled axes: Y1 + Y2 / X / R axis- CNC controlled back gauge (X axis)- CNC controlled height adjustment from the back gauge (R axis)- manual adjustment of the 2x stop fingers (Z a ...

Key data: 160 t, 4000 mm

160 ton x 40000mm Multi Axis CNC

pressure: 90.0 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secback stop - adjustable: max. 750 mmstroke: 260 mmdayligth: 460 mmtable height: 880 mmoil volume: 200 ltr.total power requirement: 7.5 kWweight of the machine ca.: 7500 kg.range L-W-H: 4250 x 1800 x 2450 mm good condition - with 1x set of new bending tools () current new price approx. 80.000 euros special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=Xlb8EgQ8088Equipment:- electro-hydraulic CNC press brake- with DELEM CNC control model DA 66W graphic 2D programming automatic bending sequence calculation and collision detection high-quality color LCD screen (TFT)- swiveling operation, front left- CNC controlled axes: Y1 + Y2 + X + R- CNC electro-motorized back stop (X axis) with 4x man ...

Key data: 40 t, 2000 mm

Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm

pressure: 50.0 tchamfer lenght: 1275 mmdistance between columns: 1040 mmcolumn arm: 250 mmram stroke speed: 225 mm/secwork speed: 0 - 9.8 mm/secreturn speed: 160 mm/secwork stroke: 215 mmdayligth: 512 mmtable height: 800 mmback stop - adjustable: 600 mmcontrol: DELEM DM 51 operating pressure: max. 300 baroil volume: 150 ltr.voltage: 400 Vengine output: 6.0 kWWeight: 4300 kgrange L-W-H: 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=5L8L2AYv0PU-------------------------- -----------------------------PLACKE electro-hydraulic CNC press brakespecially developed for the production of small partsThe advantages:• Low energy consumption• High operating comfort• Wide range of applications• Fast, robust, low-noise• With CNC control as standard-- ...

FOR SALE – AMADA PROMECAM HYDRAULIC PRESS BRAKE Model: ITPS – Length 2000 mm – Force 50 Tons With DELEM DA-65R numerical control ⚙️ TECHNICAL FEATURES: Brand: AMADA PROMECAM Model: ITPS Folding length: 2000 mm Maximum force: 500 kN (i.e. 50 tons) Maximum stroke: 105 mm CNC : DELEM DA-65R Date of manufacture: 03/02/1999 Voltage: 380 V / 50 Hz – Tri Current rating: 125 A Installed power: 11 kW Machine weight: 3450 kg Condition: Good working condition Comes with complete bending tools Photos available: General condition, numerical control, nameplate. Asking price: 12.500 € HT] ✅ Truck-mounted loading capability ✅ Ready-to-work machine

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=PBV-MDtZnlEEquipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface- CNC controlled axes: Y1 + Y2  ...

LVD PPED 135/30 CNC hydraulic press brake was built in 2024 in Belgium by LVD Company nv. The machine, distinguished by its robust design, excellent precision and high press force of 135 tonnes, is the best choice for cost-effective sheet metal machining. The machining process is performed by a bending beam, which is driven by a powerful servo-controlled hydraulic system. To ensure reliable and long-lasting operation, the hydraulic system uses components made of high-quality steel billet, as well as hardened and precisely finished pistons. The machine’s design, in turn, is based on a stress-relieved, welded one-piece frame. The use of this solution guarantees the highest possible stability during even the most intensive challenges. All work programmes are created using the TOUCH-B graphic controller with its intuitive interface and touchscreen. It allows, among others, the creation  ...

pressure: 175 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/secreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 12100 kgrange L-W-H: 5.100x2.150x2.850 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A-  ...

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A. The offered machine, apart from passing the start-up tests, has not worked in production and is like new. The ADIRA BB3515 CNC press brake is the perfect choice for precision machining of workpieces with a maximum length of 1500 mm. The machine is distinguished by the use of many state-of-the-art technical solutions, thanks to which it will meet all, even the most intensive challenges of modern business. The powerful electric drive developed in Bluedrive technology, is free of any filters, seals and hydraulic oil compared to a standard hydraulic system. This solution makes the machine much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its  ...

pressure: 100 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 400 mmtable height: 925 mmstroke: 200 mmcontrol: Cybelec DNC 8805 output: 11 kwtotal connected load: 15 kWweight of the machine ca.: 9,0 trange L-W-H: 5,2 x 2,1 x 2,9 mUsed CNC- press brake- some upper tooling (no lover tooling)- Infrared security device- documentation- hydraulic Crowning- 2 axis backgauge X + RThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 t, 4300 mm, 3700 mm

Printing capacity: 300 ton Bending length: 4,300 mm Stand width: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Projection: 450 mm Feed speed: 120 mm/sec. Working speed: 10 mm/sec. Retraction speed: 120 mm/sec. Control: Delem DA65 Equipped with: - Y1, Y2, X&R - Axis Controlled - CNC hydraulic crowning - Various sets of bending tools - Safety light cabinet Lazer Safe - Operating instructions and machine documents Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21,500 kg

pressure: 200 tchamfer lenght: 4050 mmdistance between columns: 3650 mmtable width: 190 mmstroke: 250 mmthroat: 315 mmrapid traverse: 100 mm/sworking feed: 8 mm/secreturn speed: 75 mm/sectable height over floor: 800 mmtank capacity: 240 ltotal power requirement: 18,5 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 4,4 x 1,8 x 3,0 mPress brake with 3 axes and new control CNC CYBELEC CybTouch 12maximum tool width 100 mmCurrent consumption 25 APower fuse 50 Amanual crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 110 t, 3100 mm, 2550 mm

Printing capacity: 110 ton Bending length: 3,100 mm Stand width: 2,550 mm Back gauge: 1,500 mm Stroke length: 150 mm Projection: 250 mm Feed speed: 100 mm/sec. Working speed: 8 mm/sec. Retraction speed: 65 mm/sec. Control: ESA Kvara S630 Touch Equipped with: - Foot pedal - Various tool sets - Light curtain safety Merlino - Controls renewed in 2018 Country of origin: Netherlands Motor power: 7.5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8,700 kg

pressure: 230 tchamfer lenght: 5000 mmdistance between columns: 4050 mm: 800 mm: 500 mm: 300 mm: 600 mm: BC 45 Grafik : 18,7 kW: 22,0 t: 6,0 x 2,2 x 3,75 m- 4 stop fingers- Crowning device- Adjustment of the finger height manually via crank 140 mm- Groove in the front of the table- various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8333 Type: TrumaBend V85 S Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 2050 mm Distance between frame walls: 1750 mm Machine height: 2375 mm Machine length: 3190 mm Machine width: 2100 mm Machine weight: 8750 kg

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmtable width: 120 mmtable height: 900 mmcolumn arm: 320 mmreturn speed: 100 mm/secworking feed: 10 mm/seccontrol: Cybelec DNC 70 quantity of oil: ca. 250 ltotal power requirement: 11 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille)Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.