We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 505)
used
S-30 EVOLUTION TANDEM friction washer built in 2014 in Poland is used for washing and dewatering contaminated plastics, i.e. film packaging, post-consumer films, stretch films and shredded household film waste. The process is performed inside a sealed chamber protected by non-contact seals that prevent contaminants and the washing medium from leaking outside the unit. Inside the stable construction, there are also reliable rotors working in opposite directions and low-power motors (2x 30 kW), thanks to which the S-30 EVOLUTION plastic friction washer achieves excellent washing performance at low energy consumption at the same time. The machine has not been used to this date. The total weight of the machine is 4030 kg. Technical specifications of the S-30 EVOLUTION TANDEM friction washer - rotor length: 1250 mm - rotor rotational speed: 1000 rpm - number of blades: 2x 57 - sieve di ...
used
waste oil collecting tank: . filling capacity: 1000 Liter : . with level indicator: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Used mobile scrap shear Bonfigioli Squalo 1000, operational, needs refurbishement, sold as it is.
used
make: Ambra output: 75% mehr Zuzug des Mittel : alle Medien : Ölbinder Recyling-Pack The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Conveyor belt Böhringer Brand: Böhringer Br1: A.A Length = 7000 mm, belt width: 900 mm, drive: 5.5 kW Slip-on gearbox. Br2: A.A length = 31000 mm, belt width: 950 mm, drive: 15 kW slip-on gearbox. Br3: A.A length = 28000 mm, belt width: 650 mm, drive: 5.5 kW slip-on gearbox.
used
A Mecatex shredder for wool is available. Number of rotor knives: 45, number of fixed knives: 6, number of knife holders: 2, working length: 1000mm, motor power: 37kW, max. production capacity: 1000m²/h. Control cabinet dimensions X/Y/Z: approx. 600mm/420mm/2000mm, control cabinet weight: approx. 80kg. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/2600mm, machine weight: approx. 2500kg, operating hours: approx. 900h. The hydraulics for tilting the hopper are defective. Documentation available. On-site inspection is possible.
used
Builder: KOMPTECH Model: TOPTURN X67 Year: 2011 Operative Hours: 2.700 h Country: ITALY
used
Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm.
used
Builder: SEKO Model: SAMURAI5 650/250 Engine: DIESEL 118 kW – 160 HP Data: L. 8.000 x W. 2.900 mm x H. 3.200 mm Hourly Production: 25 m³/h Shredding System: 2 COCHLEAS and 198 BLADES Weight: 9.500 kg
used
One shredder is available, blade width: 3x 46mm, power: 30kW.
used
Conveyor belt Böhringer Brand: Böhringer Belt width: 1400 mm A.A Length = 23000 mm. Drive: 18.5 kW slip-on gearbox.
used
Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h.
used
Detector detector metaldetector metal EZ-TEC type 9000 RD Voltage: 230/240V AC Amperage 315mA 1 used and 1 new
used
With documentation and controls.
used
ID2842 Knott BSS 19 Evolution year/Bauahr 2017 2995 hours/hours Ballistic disc party Ballistic Disc Separator
used
Weight: 5.65t.
used
ID2836 Construction waste sorting plant / Bauschutt-Sortieranlage year/Year of construction 1995 Construction waste sorting plant, throughput capacity 60,000 kg/h mixed construction waste, 2500-3000 kg/year commercial waste, total 110 KW Sorting system consisting of: bunker conveyor Screening machine (cup screen) Chain conveyor for coarse material Palmiste Tape conveyor belt various chain conveyors Conveyor belts for fines and leftovers screening machine Palm Reading Tape (Ergobelt) Conveyor belt rev. and moveable Electromagnetic belt separator sorting booth Sifter System various conveyor belts sorting status compressor Additional heating for sorting cabin Construction waste sorting plant, throughput 60,000 kg/h mixed construction waste, 2500-3000 kg/year commercial waste, total 110 KW Sorting plant consisting of: Bunker conveyors Screening machine (cup scree ...
used
With conveyor belt, blower, shredder, screw, drum and screen.
used
Wiedenmann foliage loading blower KLB 645, Honda 4-stroke gasoline engine GX 240, 6.0 kw/8 hp, turbine approx. 380 mm, with suspension for side wall. Incl. telescopic gallows and approx. 3 m suction hose with suction nozzle and handle as well as settling frame with lift. Ready-to-use good condition.
used
Connected load: 15.5kW, weight: 6.8t.
used
Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
used
Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h.
used
Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.
used
Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.
new
Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission. ...
used
Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.
used
Screw conveyor Saxlund Brand: Saxlund A.A Length : 4500 mm, ∅ 400 mm, Drive: 15 kW Slip-on gearbox. In stock: 2 pieces
used
Pressing force: 785kN, opening width: 1100mm, bale weight: 475-750kg, bale dimensions: 1100x750mm, max. output: 30t/h, motor power: 45kW, operational hours counter: 59,550h, with documentation, an on-site inspection is possible, the machine is located in Slovakia.
used
Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...
used
Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available.