subcategories
(3rd category level)
Manufacturer:
(Category: 405)
Description Item # 9129 – FLOWPACK WRAPPER Manufactured by FUJI Model Alpha VI FW3400 Year 2008 3 x 200Volts, 50/60Hz, 30A Also with a MARKEM SmartDate 5 Coding Unit (missing cassette reel Holder, not included) 100/230Volts, 50/60Hz, 1-2A Stainless Steel Flowpack Wrapper 4metres Long Infeed, currently set with 150mm lug gaps on Infeed Chain Driven 2-up Knife Head, 200mms across photocell for printed films Splicing PRO-FACE Plc Controls Was running at around 200 packs per minute Can run up to a maximum of about 400 packs per minute, depending on product/size/feeding system
Description Item # 9216 - FLOWPACK WRAPPER Manufactured by REDPACK (UK) model P325 S year 2021 including MARKEM SmartDate X65 Printer speed up to 250 per minute 400volt, 3ph, 50hz, 5kva Sealing jaws width. Is 140mm 2-up knife Coder is 53mm Infeed is 200cm Total lengths is 460cm.
Description Item # 9227 - FLOWPACK WRAPPER Manufactured by TEVOPHARM Model Pack-6 Built by ENTREC (Belgium) in Year 2011 Their Model Number Enpack-6-L 3Phase, 400Volts, 50Hz 1-Up Knife Head, This machine was built for big chocolate tablets. 1 kg 241x112x38mm with capacity of 24ppm 2,5 kg 250x215x45mm with capacity of 16ppmm 5 kg 430x240x45mm with capacity of 8ppm The Enpack-6 flow wrapper is a mechanical driven machine. Servo driven 2-way spotcorrection on sealing table. 2nd set sealing rollers is heated. Static pre-heating block between 1st and 2nd set of sealing rollers. Water cooled top plates on sealing table. Cross seal unit with CTC 159 (space between the two shafts = 110mm) 1 upper- and 1 lower sealing jaw, L=298mm, W=25mm, transvers profile (in running direction of foil). Cut off length: max 499mm, min 100mm. Flight bar transver unit in cross seal unit. Max foil width = 650mm Inc ...
Description Item # 9374 - FLOWPACK WRAPPER Manufactured by ULMA Model FR200 Year 2018 Product flows left to right Infeed Conveyor with pushers, no product/no bag 230Volts, 50Hz, Single phase Electrical Drawings, Operating Manual Machine was previously packing small products with products in trays, with unprinted film This machine does currently have a damaged UPC Screen and is unable to be turned on - sold as is condition or can be run from a laptop
Description Item # 9379 - FLOWPACK WRAPPER Manufactured by DELFIN PACKAGING (Italy) Model Carina 450 Year 2007 400Volts, 50Hz, 3Phase Previously used to pack chocolate bars, can also do waffles, cookies, etc. PEC for printed films Also with Coding Unit up to 60 packs per minute Maximum bag length of 350mms
Description Item # 9375 - FLOWPACK WRAPPER Manufactured by PFM Model Swift Year 2001 380Volts, 50Hz, 2.1kW Can run up to 70 packs per minute Variable speed control Adjustable Forming Box Handwheel adjustment cut off length and crimper dwell Suitable for max sizes 40 to 350mms long x 5 to 220mms wide x 1 to 100mms high
Description Item # 8869 - FLOWPACK WRAPPER Manufactured by FUJI Model FW3710 Stainless steel Vertical cutting knife motion Photo cell Multi-belt drive infeed with sensors Brush action wrapping station Has been used for packing pizzas With ZETATRADE printer
Description Item # 9070 - FLOWPACK WRAPPERManufactured by FUJIModel FW3710/BSWith SplicerMachine in stainless steel1-Up Rotary Cutting Knife MotionInfeed Belt with 3 x SensorsBrush Action Wrapping StationLast being used to pack chocolate trays measuring 206mms long x 61mms wide x 54mms highMaximum pack size is 340 x 200 x 100mms high.FUJI infeed is about 1250mms longNominal maximum capacity 150 packs per minute
Fully automatic side sealing machine UNIVERSA 400 NT Used machine; Year of manufacture 2001 How does it work and stands Description: Fully automatic flow wrapping machine for packaging products – independent length – with full wrapping and without foil overlap. Maximum performance is approx. 40 cycles/min. The product is fed via a conveyor belt at the same time. wrapped in a semi-tubular film over a forming shoulder. The product indexing is done via a horizontally scanning light barrier. The feed belt is set to different product widths can be easily adjusted. After wrapping the product with The foil is cross-welded with a permanently heated welding system. The longitudinal welding is generated by a continuous side welding device. The altitude of the forming shoulder and welding equipment is manually adjustable. The remaining foil strip is picked up on a foil win ...
Technical data: Welding punch: 450mm permanently heated Punch passage height: max. 150mm Punch Transition: Length Compensation Longitudinal welding: permanently heated welding wedge Foil: Half tube approx. 12-80μm max diameter 400mm Max. film roll width: max. 600mm Conveyor belt: inlet and outlet 400mm wide Product output: up to 85 cycles/min Transport speed: 10-30m/min Working height adjustable: 780-930mm Overall length: 1950mm Overall width: 1650mm Overall height: 1850mm Control Panel: Sytron Colour: Kallfass anthracite Rated Power/ Rated Current: 3.5KVA / 5.1A Power connection: 400Volt DS/ 50Hz with protective conductor
1 piece Kallfass feed conveyor (laying conveyor) Year of construction: 2016, delivered 2017 1 piece Kallfass Universa 500 Servo Year of manufacture: 2016, delivered 2017 1 piece Kallfass Shrink Tunnel Compact 650 DD built in 2017, (2 heating bowls at the top and 2 heating bowls at the bottom) 1 piece of removal belt
BVM full wrapping machine COMPACTA 6010 Fully automatic. Strip feeding with light barrier control Used machine built in 1998; in operational condition with support band (support band) Technical data: Cross welding: 620 mm Belt width: 560 mm Passage height: 150 mm Longitudinal welding: continuously working Film width: max: 800x800 mm Half-tubular film Electrical connection: 400 VDS, 50 Hz with earth and zero Connected load: approx. 3 kW Paintwork: RAL 5007 - brilliant blue Standard working height: 850 +/- 50 mm Description: -Machine frame made of aluminium profiles screwed together -Feeding via conveyor belt in line -Infeed and outfeed conveyor belt, speed infinitely variable aboutFrequency converter -Triggering of the work cycle and control of the product via light barrier, optionally horizontal or vertical -Longitudinal welding continuously o ...
Gainsborough GV2K108 VFFS bagger with auger filler Serial: GV101450 2010, Vertical form fill seal bagging machine with top mounted Augapac vectofill S4 auger filler, smart date X40 coder, HMI touch screen controls, up to 70 bags per minute, 250mm jaw width, comes with box of spare jaws, screws, belts, forming shoulders, also comes with Volkmann VS2000 vacuum conveyor which was previously used to vacuum powder into the hopper, with manual, 3Ph
Connection: 380V/50Hz, current consumption: 7.1A, power: 2.1kW, weight: approx. 400kg. The machine was removed from production in working condition approx. three years ago and subsequently placed in storage. CE marking available. An on-site inspection is possible.
HDG duplex HFFS RB-200-2 Bj 2022 For two small stand-up pouches with reclosure (zipper) per cycle. Conversion to one large pouch possible. Current format: width x height x bottom gusset 90mm x 150/170mm x 2x25mm Output: up to 180 bags per minute (realistically 150-160). Barely run; like new. Without dosage. Location: near Frankfurt
The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width transverse: 2mm Seam width longitudinal: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erection and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard derz. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap sealing station Acceptance of the folding cartons and transport to the filling station, fixation under the filling stat ...
Intermittent, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch Flow Wrapper Machine Type: SVB3601R Year of Make: 2000 Intermittent flow wrapping machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeder Machine type: FVS 3091 SQ Products suitable for dosing: - Granules - Powder - Icing sugar - Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch Checkweigher Machine type: KWE 5000 Year of Make: 2009 The plant was expanded and stored due to product changeover. 6 months before the machine was removed, a lot of investment was made, including new sealing jaws and a new display. We will be happy to send you a video of the run ...
Ulma VTI 640 Technical Specifications Model: VTI 640 Condition: Mint (fully functional) Year of Make: 2025 Capacity: Up to 20 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for laminated film ✅ Machine prepared for MAP ✅ Format tube for bag width 300mm ❌ Label dispenser ✅Videojet 6330 Printer ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Automatic foil centering ✅ Quick-change system for film with vacuum gluing table and knife ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt increasing ✅ Volume pneumatic filler with tank 200 – 300 litres Documentation & Operation Language (documentation & HMI): German (other languages on request) ...
SALE ONLY WITHIN GERMANY AND AUSTRIA Ulma Sienna LS BI The Ulma Sienna LS flow wrapper is designed for packaging loose, difficult, delicate and wet products. This machine is suitable for fruit & vegetables, baked goods and non-food products. Depending on the product, the output is up to 80 pieces per minute. Technical Specifications – SIENNA LS BI Model: SIENNA LS BI Condition: New (fully functional) Year of Make: 2025 Capacity: Up to 80 packs/minute (depending on film and product properties) Packaging Type: Flow-Pack Machine equipment Length of infeed belt: Free insertion distance 2,855 mm Cross sealing system: Box Motion Width of the cross seal: 400 mm Position of sealing rollers: Top Maximum film width: 1,000 mm Is Uszkhnhjp Hnayeba Features ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Product Length Sensor ❌ Double film roll holde ...
SALE ONLY WITHIN GERMANY AND AUSTRIA Ulma FR 200 The electronic, automatic flow wrapper type ULMA FR 200 has been specially developed to pack a variety of different products in flat bags (flow-pack) or pillow packs. Is Up Hnszkqvbjayeba Technical Specifications Model No.: FR 200 Condition: New (fully functional) Year of construction: 2024 Capacity: Up to 100 packs/minute (depending on film and product properties). Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2500 mm Features ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing except for high products (max. 160mm) Width sealing bar 300mm ✅ Beret system due to the cross-sealing for heavy bowls ✅ Function No product ...
SALE ONLY WITHIN GERMANY AND AUSTRIA The ULMA FM 300 automatic flow wrapper has been specially developed to package fresh products with multi-layer films in a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Ulma FM 30 The ULMA FM 300 automatic flow wrapper has been specially developed to package fresh products with multi-layer films in a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Technical Specifications Model: FM 300 Condition: Refurbished 2026 (fully functional) Year of Make: 2020 Capacity: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 2135 mm Features ✅ Wash Down Feed Belt in Hygiene Design ✅ Motorized fi ...
Ulma FM 305 The ULMA FM 305 automatic flow wrapper has been specially developed for packaging fresh products with multi-layer films under a modified atmosphere (MAP). This machine produces hermetically sealed pillow-pack tubular bags in pillow format. Technical Specifications Model No.: FM 305 Condition: Exhibition machine (fully functional) Year of manufacture: 2023 Capacity: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Flowpack Machine equipment Length of infeed belt: Free insertion distance 3000 mm Features ✅ Motorized film roll holder (max. film width 700mm) ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing beam made of stainless steel with Euro hole cutti ...
Ulma VTC 840 Technical Specifications Model: VTC 840 Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 90 packs/minute (depending on film and product characteristics). Packaging Type: Flowpack Features ✅ Wash Down IP 66 version in hygiene design ✅ Machine suitable for mono PE film ✅ Motorized film roll holder (max. film width 830mm) ✅ Headspace Vacuum Version (Tigth Bag) ✅ Format tube for bag width 240 & 310mm ✅ Photocell for printed film ❌ Label dispenser ❌ Printers ✅ Signal for printers / labellers ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 830mm) ✅ Cross sealing beam with Easy Teflon Change ✅ Ejector sponge for controlling package volume ✅ Synchronization signals for pre- and trailing devices ✅ Discharge belt Documentation & Operation Language (documentation ...
Ulma FM 300 C X (WASH DOWN VERSION) The ULMA FM 300 C X was developed to package fresh food with barrier film (BDF) in a modified atmosphere (MAP). This machine produces hermetically sealed "pillow packs" that are then shrunk in the hot air tunnel. Technical Specifications Model: FM 300 C X Condition: New Year of Make: 2025 Capacity: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Barrier Shrink Tubular Bag Machine equipment Length of infeed belt: Free insertion distance 2490 mm Features ✅ Machine in wash down version ✅ Motorized film roll holder (max. film width 900mm) ✅ Foil Limit Switches ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Machine suitable for barrier shrink film and laminated film ✅ Cross-sealing bar with double tooth for mono films ✅ Independent ej ...
Vertical packaging machineAudion Elektro AVM 190I-2. Was in our company as a replacement machine. The machine is currently running on PE flat film 420mm wide.
Wrapping Machine Fabr Böhl Type BSB-45 SX-2 YOC 2004 Total connection 2.5 kw Product Measurements Width 5-250 mm Height 5 - 250 mm Length 600-6000 mm Machine weight 950 kg with rolling tables
Wolf vertical bagging machine, With 2021 Herma labeler and a markem Printer
A HD Wiegetechnik multihead weigher with a Deltapack vertical form fill and seal machine is available. 1) HD Wiegetechnik HDW 10 3.5 multihead weigher, year of manufacture: 2004, hopper volume: 3.5l/head, weighing heads: 10, controller: MD 400 E. 2) Deltapack DE 420 FU vertical form fill and seal machine, year of manufacture: 2004, max. film width: 740mm, longitudinal seal length: 540mm, cross seal length: 430mm, sealing jaw width: 450mm, machine dimensions X/Y/Z: approx. 2300mm/1550mm/1800mm. Documentation available. An on-site inspection is possible.
Production: • Bag type: Bottom seal bags • Suitable products: o Garbage bags o Fruit and vegetable bags o Various types of plastic bags Materials: • Processable materials: o LDPE o HDPE o MDPE Technical Specifications: • Maximum sealing width (bag width): 1200 mm • Bag length (draw length): 150–3400 mm • Number of lanes: 1 • Maximum linear speed: 150 m/min • Maximum production speed: Up to 50 bags/min Control System • PLC controlled • Operator interface terminal (HMI) • Print registration control • Servo-driven sealing bar Equipment • Unwind unit • Photocell • Anti-static bars
