The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
sheet metal working / Longitudinal Cutting Lines
date: 09.10.2023 add to watchlist
approved
dealer
item-No.: 162548115
New in: 2011

used

check Seller: HEGO Blechverarbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm

sheet metal working / Longitudinal Cutting Lines
date: 29.03.2024 add to watchlist
approved
dealer
item-No.: 160238516

used

check Seller: Jens Kürschner Maschinenhandel
Location: Land-de

add to watchlist

Cut-to-length line Auxmet strip line Unwinding reel for max 4to coil weight Bandwidth 50-1000mm Material thickness 0.5-3mm at 600N/mm2 Line speed 60m/min Number of stripes 1-11 Reel reel up to 4to coil weight with foiling unit without knife with retrofitted photoelectric sensors The offer is aimed exclusively at traders within the meaning of §14 BGB

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765249

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

12″ x .125″ x 4000Lb Bliss Slitting Line Make: Bliss Material Width: .075” – 12” Material Thickness: .008” – .125” Weight Capacity: 4,000Lb Coil ID: 16” – 20” Coil OD: 72”

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765966

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

52″ x .187″ x 30,000Lbs Braner Slitting Line Make: Braner Material Width: 12″ – 54″ Material Thickness: .010″ – .187″ Weight Capacity: 30,000Lbs Coil ID: 20″ Coil OD: 72″ Entry 3-Arm Turnstile Entry L-Type Coil Car Mandrel Uncoiler with Hold – Down Roll Hydraulic Peeler Edge Guides Electric Edge Control Three (3) Slitting Heads with 7″ Arbor Diameter Adjustable Arbors DC Motor Drive Two (2) Scrap Winder Pit Cross Over Table Combo Type Tension Stand with Water Cooled Brake Recoiler with Over-Arm Separator 125HP Recoiler Motor CMC Solid State Drive 4-Arm Exit Turnstile

sheet metal working / Longitudinal Cutting Lines
date: 27.02.2024 add to watchlist
approved
dealer
item-No.: 163452440

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Liney Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Driv ...

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 159602526

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

Chicago Loop Slitting Line 48″ x .040″ x 40,000Lb (A3756) 48″ x .040″ x 40,000Lb Chicago Loop Slitting Line Stock#: 19650C Make; Chicago Material Width: 12″ – 48″ Material Thickness: .005″ – .040″ Coil Weight: 40,000lb Coil ID: 20″ Coil OD: 72″ Speed: 1500 feet per minute Entry 4-Arm Turnstile Powered Rotation ID Protective Arms Entry L-Type Coil Car Hydraulic Lift & Traverse Self – Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion AC Feed-Up Motor Drive Water Cooled Brake Hydraulic Peeling Table Driven Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Three (3) Slitting Heads Ejection Type Head Change Arbor Diameter: 4″ Lots of Knives & Tooling 50HP DC Motor Drive Scrap Baller AC Motor Drive Automatic Dumping Pit Cross Over Table Cascade Entry & Exit Rolls Rotary & Drag Board Tensi ...

sheet metal working / Longitudinal Cutting Lines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162261392

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 270.240 € add to watchlist

CINCINNATI ACW6 slitting line is used in the processing of thin steel sheets with a maximum thickness of 4 mm. The process consists in gradually unrolling the sheet coils towards cutting rollers with special roller knives with a thickness of 5 to 30 mm, and then passing the sheet between the rollers for precise slitting. After the slitting process, the sheet is wound onto coils ready for further processing. The ACW6 slitting line guarantees the highest product quality while making optimum use of the raw material. The CINCINNATI coil slitting line consists of: – sheet decoiler – sheet metal winder – roller knives (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – ejector spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – slitting aggregate unit – brake Technical specifications of the CINCINNATI ACW6 slitting line - maximum sheet thickness: 4 mm - minimum shee ...

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765968

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

60″ x .135″ x 20,000Lb Cincinnati – Forte Loop Slitting Line Material Width: 12″ – 60″ , Thickness: .010″ – .135″, Weight: 20,000Lb, Coil ID: 16″ – 24″, Coil OD: 72″, Speed: 600 fpm, Direction: Left to Right. Entry Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Powered Peeler, Driven Pinch Rolls, PVC Applicator, Entry Shear, Two Slitting Heads, Injection Design, 5″ & 7″ Arbor Diameter, 75HP DC Motor, Two (2) Hydraulic Scrap Winders, Pit Cross Over Table, Drag Board & Rotary Tension Stand, Recoiler with Over-Arm Separator & Push-Off, 150HP DC Motor, Exit L-Type Coil Car & Turnstile. Electrics, Hydraulics, Controls, Tooling, Spare Parts

sheet metal working / Longitudinal Cutting Lines
date: 24.01.2024 add to watchlist
approved
dealer
item-No.: 163206529

used

check Seller: MAchine MW
Location: Land-es

add to watchlist

Slitting line Fimi 1500×2.5mm x15t (A3783) Manufacture FIMI ITALY Year 1990 Strip width Min. 200 mm Max. 1500 mm Strip thickness 0.3 – 2.5 mm Coil weight Max. 15 t Coil- Max. 1500 mm Speed Max. 80 m/min Working direction Right  Left The line consists of:  Decoiler Mandrel Cone-Ø 480 – 610 mm Drive / braking Hydraulic motor Lifting table Hydraulic  Coil opener / pinch roll unit Telescopic table Hydraulic No. of pinch rolls 2 Pinch roll-Ø 400 mm Driving motor 25 kw  Slitting head No. of heads 2 Shafts diameter 120 mm Main drive D.C. motor Driving power 92 kW  Scrap baller  Minimum scrap width 5 mm  Maximum number of slits 17 Slits up to 1.0 mm 5 Slits at 2.5 mm  Brakes Pneumatic Press up and dow  Re coiler Capacity 15 t Diameter 508 mm Driving power 120 kw  Term style 4 arms x 15 ton

sheet metal working / Longitudinal Cutting Lines
date: 15.01.2024 add to watchlist
approved
dealer
item-No.: 143858995
New in: 2002

used

check Seller: HEGO Blechverarbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Unwinding reel / decoiler â?¢ Bandwidth / strip width max. 1,500 mm â?¢ Tape thickness / strip thickness (430 N/mm2) 0.5-2.0 mm â?¢ Coil outer diameter / coil outer - 1,300 mm â?¢ Coil inner diameter / coil inside - 470-520 mm â?¢ Coil weight / coil weight 10,000 kg â?¢ Side shift / side shift . . . . . . . . . . . . . . . . .

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158757362

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

60″ x .067″ Iowa Precision Multi – Blanking Line Make: Iowa Precision Serial # ES68615 Material Width: 6″ – 64″ Material Thickness: .009″ – .067″ Coil ID: 18″-28″ Coil OD: 72″ Sheet Length: 10″ – 144″ Tolerance: =-1/32 Slitting Head Six (6) Cuts, with Edge Trim Coil Straightener with Adjustable Work Rolls Mechanical Drive Pneumatic Flying Shear Lift Table Stacker with Driven Roll Conveyor Electrics, Controls, Tooling

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158635315

new

check Seller: MAchine MW
Location: 49000 Dnepr Land-ua

add to watchlist

Cut-to length slitting machine SM-1250х8 Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. This cut-to-length slitting machine lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are four types of the sheet metal cut-to-length machines we make: The manual cut-to-length slitting machine (cutting for 2 strips) The electric cut-to-length slitting machine (cutting for 3-4 strips) The electric cut-to-length slitting machine (cutting for 6-10 strips) The electric cut-to-length slitting machine (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special scr ...

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 159602480

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

Loopco Loop Slitting Line 60 x 0.125 x 40,000Lb (A3755) Make: Loopco Material Width: 12″ – 60″ Material Thickness: .010″ – .125″ Coil Weight: 40,000Lb Coil ID: 20″ Coil OD: 72″ Speed: 1200 feet per minute Mandrel Uncoiler Powered Hold Down Roll Powered Expansion Water Cooled Brake AC Feed Up Motor Sliding Base Hydraulic Peeling Table Adjustable Edge Guides Driven Pinch Rolls Three (3) Slitting Heads Arbor Diameter: 5″ Crane Removable Design Keyless and Shimless Tooling Adjustable Arbors 100HP DC Motor Drive Pit Cross Over Table Rotary & Drag Board Tension Stand DC Motor Drive Coated Tension Rolls Strip Separating Bar with Tooling Recoiler Powered Over-Arm Separator Hydraulic Push – Off Powered Gripper 125HP DC Motor Drive Exit 2-Arm Turnstile Powered Rotation ID Protective Arms Electrics, Hydraulics, Controls, Tooling, ...

sheet metal working / Longitudinal Cutting Lines
date: 16.10.2023 add to watchlist
approved
dealer
item-No.: 161235189

used

check Seller: DenTool LTD
Location: Land-dk

add to watchlist

Stock number: 3778 CUTTING LINE Manufacturer: MORGAN , Type: 1330 x 0.7 - 3.2 mm Specifications: Size scissors length 1330 mm Size sheet thickness 0.7 - 3.2 mm - Roller feed 2 pc dia. 100 rools Composed of: - Straightening machine 5 pc. dia 100 Reels - Drain reel 5 ton dia. 530-610 mm tone - Scissors Morgan 1500 x 3.2 mm Accessories: Coil trolley 5 ton Length: 6500 mm, Height: , Width: 33.00 mm, Weight:

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765452

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

18″ x .070″ x 6,000Lb Morvay Slitting Line Material Width: 18″, Weight Capacity: 6,000Lb, Material Thickness: .008″-.070″, Coil ID: 20″, Direction: Left to Right. Mandrel Uncoiler with Disc Brake, Powered Mandrel Expansion, Powered Hold-Down Roll, Driven Entry Pinch Rolls, Slitting Head with Adjustable Arbors, Knives & Tooling, Recoiler with Hydraulic Push-Off, Powered Over-Arm Separator, 50HP Motor, Exit 2-Arm Turnstile

sheet metal working / Longitudinal Cutting Lines
date: 09.10.2023 add to watchlist
approved
dealer
item-No.: 130984949

used

check Seller: AUER
Location: 4407 Steyr-Gleink, Lehnerweg 6 Land-at

add to watchlist

2 Coilhaken 1 x 9 t 1 x 1 t

sheet metal working / Longitudinal Cutting Lines
date: 04.10.2023 add to watchlist
approved
dealer
item-No.: 159729551
New in: 2004

used

check Seller: HEGO Blechverarbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Bandwidth.. 870 mm Band thickness 0.2-3.0 mm Coil weight 10 to. Coil ID Unwinder... 400/508/750 mm Coil ADBewinder.. 1,500 mm Cutting performance. 110 N/mm2 Velocity 120 m/min.

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765854

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

24” x .125” x 8000lbs Paxson Slitting Line Make: Paxson Material Width: 30” Material Thickness: .010” – 125” Weight Capacity: 8,000Lbs Coil ID: 16”-20” Coil OD: 62”

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765960

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

36″ x .187″ x 10,000Lb Paxson Slitting Line Make: Paxson, Material Width: 12″ – 36″, Material Thickness: .010″ – .187″, Weight Capacity: 10,000Lb, Coil ID: 20″, Coil OD: 62″, Direction: Left to Right. Mandrel Uncoiler, Slitting Head with 6″ Arbor Diameter, 25HP Feed-Up Motor, Tooling, Recoiler with Push-Off, 60/75HP Motor, Scrap Winder, 3-Arm Exit Turnstile. Electrics, Hydraulics, Controls, Tooling

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 159602477

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

Paxson Loop Slitting Line 72″ x 0.375″ x 50,000Lb (A3754) Make: Paxson Material Width: 12″ – 72″ Weight Capacity: 50,000Lb Thickness: .050″ – .375″ Coil ID: 20″ – 30″ Coil OD: 72″ Line Speed: 850 feet per minute Direction: Right to Left Entry L-Type Coil Car Floor Standing Design Hydraulic Lift & Traverse Self Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Water Cooled Brake Feed-Up Motor Sliding Base Hydraulic Peeling Table Driven Pinch Rolls Adjustable Edge Guides 4-Roll Coil Breaker Mechanical Entry Crop Shear Two (2) Slitting Heads Arbor Diameter: 9″ and 12″ Crane Removable Type Adjustable Arbors 150HP DC Motor Drive Multi Speed Gear Lots of Knives and Tooling Two Pro-Eco Scrap Winders Max Thickness: .500″ 25HP Motor for Each Unit Powered Open / Close Pit Cross Over Table Drag Bo ...

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765972

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

72″ x .187″ x 50000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 161360942

used

check Seller: MAchine MW
Location: Land-ua

add to watchlist

Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) is perfect solution for longitudinal cutting of coil metal into strips. This line can work with very big coils up to 74,000 Lb weight and 0.25 inches maximum metal thickness. Line is strong enough to make cutting speed 200 – 600 fpm depends on metal thickness and width you work with Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Manufacturer: PRO ECO Material: CRS, HRS, HPP & O Material Width: 12″ – 72″ Material Thickness: .060″ – .250″ Coil Weight: 74,000Lb Coil ID: 20″ – 30″ / 20″ – 24″ Coil OD: 72″ Line Speed: 200 – 600 fpm Direction: L-R Three (3) Coil Storage Ramp Coil Car Powered Lift & Traverse Double Cone Uncoiler Sliding Base Dual Water Cooled Brake Feed-Up Motor Powered  ...

sheet metal working / Longitudinal Cutting Lines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163617272
New in: 1997

used

checkTOP Seller: Surplex GmbH
Location: Piombino Dese Land-it
Price: used machinery auction RESALE 600 € add to watchlist

Description: Power supply: , Voltage: 380 V Frequency: 50 Hz Absorption: 6 A Nominal power: 2 kW weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 600 x 1,800 mm

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 159956744

used

check Seller: MAchine MW
Location: 48001 USD Land-us

add to watchlist

Stamco Loop Slitting Line 60″ x .135″ x 40,000Lb Make: Stamco Material Width: 12″ – 60″ Material Thickness: 010″ – .135″ (stainless), .190″ (aluminum) Coil ID: 20″ Coil OD: 72″ Direction: Right to Left Entry 4-Arm Turnstile Powered Rotation C-Hook Arm Slot Entry L-Type Floor Standing Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Sliding Base Water Cooled Brake Feed-Up Motor Drive Hydraulic Peeling Table Entry Guiding Roll Entry Mechanical Crop Shear Driven Pinch Rolls Adjustable Edge Guides Two (2) Slitting Heads Arbor Diameter: 7″ Crane Removable Heads Adjustable Arbors Motor: 75HP 1750 / 2100 RPM Lots of Knives and Tooling Two (2) Scrap Winders Hydraulic Motor Drive Powered Open / Close Pit Cross Over Table Cascade Rolls Drag Board Tension Stand  ...

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 159608671

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

60″ x .187″ x 50,000Lb Stamco Loop Slitting Line Make: Stamco Material Width: 12″ – 60″ (Recoiler Mandrel is 56″) Material Thickness: .020″ – .187″ (.135″ Stainless) Coil ID: 20″ Coil OD: 26″ – 72″ Coil Weight: 50,000Lb Direction: Left to Right Entry 4-Arm Coil Turnstile Powered Rotation Entry L-Type Coil Floor Standing Design Powered Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Sliding Base Water Cooled Brake Feed-Up Motor Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Air Clutch & Brake Two (2) Slitting Heads Arbor Diameter: 9″ Slitter Face Width: 56″ & 60″ Powered Arbor Adjustment Motor: 100HP DC Tooling with Tooling Rack One Scrap Winder Hydraulic Motor Powered Open / Closed Herr-Voss 6-Hi Strand Extensioner Number  ...

sheet metal working / Longitudinal Cutting Lines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163301261
New in: 2011

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 21.195 € add to watchlist

STEP-MET NCW 1250 X 1.5 slitting line built in Poland in 2011, is used in the process of slitting thin steel sheets with a maximum thickness of 1.5 mm into equal-sized stripes. The material is slit longitudinally by high-quality cutting rollers, which guarantee the highest product quality while making optimum use of the raw material. The NCW 1250 X 1.5 slitting line consists of several modules, including, among others, an easy-to-operate control cabinet that allows adjustment of the operating speed and cutting width. The STEP-MET slitting line consists of the following components: – sheet metal decoiler – sheet metal winder – control cabinet Technical data of the STEP-MET NCW 1250 X 1.5 slitting line - maximum sheet metal thickness: 1.5 mm - maximum sheet metal width: 1250 mm - minimum sheet metal width: 25 mm - maximum sheet metal coil weight: 6 t - cutting speed ran ...

sheet metal working / Longitudinal Cutting Lines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163786992

used

checkTOP Seller: Surplex GmbH
Location: Roermond Land-nl
Price: used machinery auction RESALE 25.000 € add to watchlist

Description: Working width: 125 - 1500 mm System consisting of, -Height-adjustable coil trolley -Decoiler type HYD DEC-5-1500 -Stretching / Feed through unit -Length cutting unit -Length measuring device -Cutting shears type BKR 1600-2-S -Positioning device -Punching unit with 20 punches -Profiling unit -Double mini press brake -Outfeed roller conveyors -Sheet vacuum lifter with stacking stationplate cut-off length: 6,300 mm, strip width: 125 - 1500 mm, coil internal diameter: 500 mm, coil external diameter: 1,000 mm, coil weight: max 5000 kg, weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 50,000 x 3,000 x 3,000 mm

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 159314608

used

check Seller: MAchine MW
Location: 48001 Michigan Land-us

add to watchlist

Universal Slitting Line 72″ x .187″ x 20,000Lb Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765857

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

30″ x .150″ x 15000Lb Yoder Slitting Line Make: Yoder Material Width: 8” – 30” Material Thickness: .010”– .150” Weight Capacity: 15,000Lb Coil ID: 16”-20” Coil OD: 74”

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765859

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

36″ x .125″ x 15,000Lbs Yoder Slitting Line Make: Yoder, Material Width: 36”, Gauge: .010” – 125”, Weight Capacity: 15,000Lbs, Coil ID: 16”-20”, Coil OD: 62”, Direction: Right to Left. Mandrel Uncoiler, 3-Leaf Mandrel Design, Hydraulic Expansion, Air Brake. Slitting Head, Entry Driven Pinch Rolls, Arbor Diameter: 5”, Arbor Width: 39”, Adjustable Outboard, Manual Arbor Adjustment, 15HP Feed-Up Motor, DO James Gear Box. Recoiler, Face Width: 39”, Hydraulic Push-Off, Manual Grip, Strip Separators, 40HP 1775RPM Motor, DO James Gear Box. Scrap Winder, Self-Dumping Design, Mechanical with AC Motor. Electrics, hydraulics, controls, tooling. Installed

sheet metal working / Longitudinal Cutting Lines
date: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158765969

used

check Seller: MAchine MW
Location: Land-us

add to watchlist

60″ x .135″ x 40,000Lbs Yoder Slitting Line Material Width: 12″ – 60″ Material Thickness: .010″ – .135″ Weight Capacity: 40,000Lbs Coil ID: 20″-24″ Coil OD: 72″ Pull Through Design Entry Coil Car Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Slitting Head with Gear Box and AC Feed-Up Motor Single Scrap Winder Recoiler with Over-Arm Separator DC Motor Drive Exit Turnstile Electrics, Hydraulics, Controls

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information