We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 1300)
used
37 kW, 10 bar, new mineral oil and oil separator.
used
Oil-free. Water cooled. Variable speed drive. Volume flow 5.94 - 13.92 m3/min at 7.0 bar. New LP and HP air ends in 2012 and have 25000 working hours. Engine had been overhaulded.
used
132 kW, 11.5 bar, with Sigma control.
used
2 x Atlas Copco refrigerant dryer FD1600WFS 96 m3/min
used
Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.6 m3/min.
used
Oil-free. Water cooled. 8.6 bar
used
Hours: 37.0000 YOM: 2009 Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.6 m3/min.
used
10 bar, 100 m3/min. Adsorption dryer, water cooled. In condition as taken out of operation. Test run not possible and fully functionality can not be guaranteed.
new
Oil-free, air-cooled, scroll compressor with refrigerant dryer. Zero working hours. Machine unused - new! Machine available because of purchase mistake!
used
Refrigerant dryer Kaeser TG 301 FE 16 bar, 30,8 m3/min, Refrigerant R 404a.
used
We offer compact Visser layer palletizers for bags. External dimensions of the machine approx. 3,500 cm wide, 1,800 cm deep, 3,800 cm high. Net weight approx. 2.0 to. Lugs for forklift tines to be easily moved. Adjustable pallet dimensions are 1,600 x 1,200 cm, 800 x 1,200 cm, 1,000 x 1,200 cm. Approx. 350 - 500 bags/hour. Of this type of palletizer, we can offer three identical machines to choose from: Machine n°1) Used, without warranty, condition 2-3, cleaned and functional tested Machine n°2) Used, without warranty, condition 1-2, cleaned and functional tested Machine n°3) New, legal warranty, condition 1 Each of the machines is immediately available. If required, we can add suitable bag conveyor belts. (Example picture in the ad)
used
A Memmert universal heating oven for laboratory and test procedures is available. Nominal temperature: 180°C, internal dimensions X/Y/Z: 1040mm/1200mm/600mm, internal volume: 750l, output: 6.2kW, external dimensions X/Y/Z: approx. 1200mm/1650mm/750mm, weight: approx. 200kg. On-site inspection is possible.
used
Optical transmitter system: Offset transmission type projector module, Optical receiver system: Offset dual optical module with low/high magnification, Illumination system: LEDs in 3 colors (RGB), Display light source: Blue LED. Repeat accuracy: +/-0.1μm, Measuring accuracy: +/-10μm, Measuring mode standard/fine: 4/16 million measuring points. Measuring range: low magnification diameter/height: 300mm/200mm, high magnification diameter/height: 70mm/50mm. Rotation range: 360°, stage movement X/Y: 280mm, inclination: 45°, max. weight of measuring piece: 20kg. Dimensions X/Y/Z: approx. 800mm/1000mm/900mm, weight: approx. 60kg. Documentation available.
used
A total of five ABB robots, which were primarily used in logistics and goods handling, are available. 1) IRB360 M2004, operating hours: 25190h. 2) IRB360 M2004, operating hours: 25302h. 3) IRB360 M2004, operating hours: 7446h. 4) IRB4600 M2004, operating hours: 32046h. 5) IRB6640 M2004, operating hours: 20482h. Documentation available. On-site inspection is possible. Individual sale possible.
used
Nominal payload: 20kg, nominal additional load arm: 10kg, nominal total load: 30kg, position repeatability: ±0.05mm, number of axles: 6, reach: 1611mm, height: 2026mm, weight: 254kg. No known defects, has been regularly serviced, on-site inspection is possible.
used
Three identical Ishida packing robots are available, suitable for ready meals, meat, poultry, fish and seafood, fresh fruit and vegetables, salads, dairy products, fruit and confectionery. Max. throughput capacity: 80 products/min, max. speed infeed belt: 0.6m/s, max. speed crate conveyor: 0.6m/s, frame dimensions: 2000x1600x2600mm, weight: 1.2t. With documentation, an on-site inspection is possible.
used
A Klingelnberg single flank gear testing machine for cylindrical and bevel gears is available. Center distance for cylindrical gears: 900mm, test wheel weight: 1000kg, bevel gear diameter: 425mm, bevel pinion mounting dimension: 800mm, bevel gear outer mounting dimension: 440mm, mounting bore diameter: 90mm, mounting bore depth: 400mm, max. radial load: 50kg, angle adjustment: 45°-135°. Machine dimensions X/Y/Z: approx. 1600mm/2400mm/1600mm, weight: approx. 1600kg. One electrical component of the circuit board is defective. Documentation available. On-site inspection is possible.
used
Folding units buckle plate/sword: 6/2, max. sheet dimensions X/Y: 800mm/540mm, min. sheet dimensions for parallel fold: 150mm/210mm, min. sheet dimensions for cross fold: 150mm/210mm, min. sheet dimensions for triple fold: 210mm/300mm. Folding capacity with parallel fold/cross fold: 40000/22000 sheets/h, paper weight range: 40g-300g/m². Machine dimensions X/Y/Z: approx. 3700mm/1500mm/1700mm, weight: approx. 1300kg, machine working area requirement: approx. 5500mm/3000mm. Including flat pile feeder with suction drum from Kremser, a movable and variable delivery for parallel and cross breaking as well as compressor. Documentation available. On-site inspection is possible.
used
A Stilmas distillation plant for the production of water for injection (WFI) is available. Production capacity 25°C/85°C: 500l/h / 1000l/h, max. temperature: 144°C. Documentation available. On-site inspection is possible.
used
A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible.
used
Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible.
used
Two testing devices are available. 1) Probat-Werke SF 1000 EL spring testing machine. 2) Karl Frank GmbH 38505 hardness tester. On-site inspection is possible.
used
A Linden twin-screw mixer is available. Total volume: 225l, usable volume: 150l, machine dimensions X/Y/Z: approx. 1650mm/1300mm/1380mm. Documentation available. On-site inspection is possible.
used
Power consumption: 20kWh, compressed air supply: 6bar, connected load: 22kVA, with documentation.
used
Throughput: 50kg/h, material: stainless steel, roll diameter: 120mm, roll width: 40mm/25mm, max. roll gap: 4mm, max. roll speed: 15rpm, max. pressing force: 20kN/cm², machine dimensions X/Y/Z: approx. 1635mm/1450mm/930mm.
used
Two identical Forel multi-pane insulating glass production lines with fixed spacer and Swiggel are available. Glass production options: 2-fold/3-fold, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible.
used
Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.
used
A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by ...
used
A robot arm with gripper finger and camera is available. Sensor skin collaborative operation is possible. Reach: 911mm, repeat accuracy: +/-0.03mm, adjustable gripping force: 40Nm-120Nm, max. workpiece weight: 2kg. Transport dimensions X/Y/Z: 775mm/1600mm/730mm, working position X/Y/Z: 775mm/1900mm/960mm.
used
Measuring range X/Y/Z: 1000mm/1200mm/800mm, measuring head: Renishaw motorized rotary and swivel head with measuring probe model PH10M (without probe), control: Wenzel CNC controller WPC2040/3, software: Metrosoft CM 3.112. Panel: hard stone, panel dimensions X/Y/Z: 2400mm/1440mm/500mm, space requirement: 17m², weight: approx. 5500kg. Including manual control panel, PC and monitor. Documentation available. On-site inspection is possible.