We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
WEISHAUPT FUEL BURNER - IN WORKING ORDER - LITTLE USED -
used
module: 10 diameter: 356 mmBore diameter: 90 mmwidth: 140 mmnumber of teeth: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
2 x APROVIS STEAM GENERATORS IN CONTAINERS 2 x Container sets with very little use The water softener/treatment plant for these is also available. Designed to run from 4 x 1.4 MW gensets Type: SGCD-33.7-600-1400/5000-1H Year: 2012 Hours: Run for 3 years Thermal Output: 2 x 497 kW Steam Production ALL: 1480 kg/h Water Content: Low: 4454L Full:5997 Max. PS: 10 Main Steam Temp. All.: 184 C PT: 21 bar
used
module: 18 diameter: 360 mmBore diameter: 90 mmwidth: 140 mmnumber of teeth: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
For sale is a whole heating system installed in the container, all ready with custom-made chimney. Technical inspection was carried out by Dekra. The heater has only 16 hours of operation behind it, so it's almost like new. Incl. Weihaupt light oil burner, incl. heating oil tank, 5t incl. fireplace system, incl. mixed cooler, incl. condensate management for steam generators up to 1bar, incl. Additional equipment: condensate tank, incl. pipe separator + backwash protection filter + Single water softener VAD 25, incl. Dosing station and accessories, incl. Insulated sheet steel container Can be visited in Mölln. Technical data can be found in the pictures. Sale only to self-collectors, if you have any questions, please contact us.
new
diameter: 2000 mmwidth: 5000 mmfilling amount: 8000 ldegree: max. 110 gradtemperature: 110 °C0: 0,5 bardimensions of the machine ca.: 2000x5000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.
used
faceplate diameter: 500 mmnumer of jaw: 4 Stückthickness of jaw: 45 mmhight of jaw: 80 mmheight of plate: 100 mmdaylight: 160 mmtool adaptor: zylindrisch Ø 160 mmweight of the machine ca.: 100 kg- Cast design- cylindrical holder with Ø 160 mm- individually adjustable jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
V195 1 electric steamboiler Loos/Germany EUR 1.500,- loaded year 1990, 6 bar, 164°C, capacity 115 kg/h, 81 kW, 380V/50 Hz, volume 85 ltr. EUR 1.500,- loaded ex works V196 1 electric steamboiler Roucka-Slatina/Czech. EUR 1.500,- loaded year 1993, 9,5 bar, 177°C, capacity 120 kg/h, 90 kW, 380V/50 Hz EUR 1.500,- loaded ex works
used
grinding diameter: 1520 mmgrinding length: 6000 mmgrinding wheel size: 660 mmsteady: 800 mmsteady: 800 mmtotal power requirement: 15/25 HPweight of the machine ca.: . tdimensions of the machine ca.: . m2 SteadiesCoolant SystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
1x mobile steam boiler WIMA / Miltenberg, with oil burner, capacity: 1,500 kg steam/h, incl. water softening system, the complete system is mobile and compactly stowed in a 20-foot sea container, power: 1,118 KW, operating hours: 4,380, immediately ready for use, NP 180 ́
used
tool clamping area: SK mmweight: 0,1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
- Weishaupt monobloc two-gas burner - Burner type: WM-G50/1-A - Suitable for the combustion of natural gas and biogas - Year of construction: 2016 - Power: 800 - 8000 KW
used
grinding diameter: 250,350,450 mmgrinding length: 1000 mmcentre height: 125,175,225 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±8 °longitudinal feed of the table: 1300 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 4,2 x 2,0 mAs the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten Maschinen mit zusätz ...
used
Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176
used
Steam output: 600kg/h, pressure volume: 42.9l, with oil tank and water softening system, an inspection is possible.
used
1 STERLING STERLCO used diathermic oil boiler with electric heating type S-9026-J0 serial nr. 95E5517 Dual zone Heating Capacity Zone 1: 18 KW Heating Capacity Zone 2: 36 KW Total Heating Capacity: 54 KW Pump Motor (Zone 1): 1.5 KW / 2 HP Pump Motor (Zone 2): 1.5 KW / 2 HP complete with circulation pumps and high accurency temperature controlers 1" oil circulation pipes (up to 110 L/min) 1" vent pipes (up to 110 L/min)
used
Output: 1.5t steam/h, max. nominal power: 1093kW/h, gas pressure: 50mbar, fuel: natural gas, including water container, two pumps, safety devices and steam dryer.
new
Motor 2,2kW, 230/400V, 950rpm Dimensions 100x150cm Learn more by pictures
used
Power: 365-946kW, capacity: 141l, max. operating temperature: 184°C.
used
Available two units of this SIAT RECOPACK recovery boiler. This boiler recovers the heat from the exhaust gases of turbines or engines, but it doesn't have burner to produce his own heat. They are disassembled and ready to be load. Power 493kW pressure 12 bar Capacity 5065 l YOM 2009 Model Recopack
used
Max. steam output: 250kg/h, with Natural Gas Motor MWM, including documentation.
used
see performance data on photo with data
used
With Burner W. Oertli AR-4.
used
Steam generator, steam boiler, boiler stove used Manufacturer Gebr. Weißbach GmbH Year of construction 1993 Ab. Steam generation 1700 kg / h Ab. Pressure 6 bar Water capacity 3795 l zul Vorlauftemp. 165°C zul heat output 1.1 MW Dimensions: 4000 x 1900 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.
used
Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...
used
There are two identical Viessmann Paromat-ER-ND available, nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.
new
dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner ...
used
Gas-fired high-speed steam generator with feed water treatment and dosage module., Additional title: high-speed steam boiler, Steam capacity: 120 kg/h, Perm. working pressure: 10 bar, Base construction: mounted on platform, Features: feed water treatment and dosage module