Manufacturer:
(Category: 107-694)
Offer 26122 Technical data: - Max. working width 2020 mm - Max. material thickness 1.25 mm - Cutting angle 2.0 ° - Pull-out front material support - Backgauge adjustable with handwheel 5 - 500 mm - Table height 850 mm - Space requirement approx. W 2450 x H 1150 x D 1400 mm - Weight approx. 600 kg
sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1300 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26093 Technical data: - Max. cutting length 3050 mm - Max. material thickness at 40 kg/mm², strength 2.5 mm - Cutting gap adjustment - Cutting angle 1°35 - Strokes 50 1/min - Stand projection 100 mm - Table height approx. 750 mm - Front angle stop 850 mm - 2 pieces support arms 500 mm - man. Backgauge can be operated from the front 5 - 750 mm - Sheet metal holding pneum. Supports - E – Footswitch - Drive 400 V / 5.5 kW - Space requirement approx. W 3800 x H 1500 x D 1400 mm - Weight approx. 2900 kg
sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg
sheet width: 2000 mmplate thickness: 1,5 mmtotal power requirement: kWweight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Guillotine shears Manufacturer: BBM Type: TS-H25-16 Year of Make: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. stroke rate: 15 1/min. Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Line fuse: 63 A Hydr. Connection data: 300 bar Pneum. Connection data: 6 bar Weight approx. : 11 to.
sheet width: 2500 mmplate thickness: 4 mmdistance between columns: . mmControl: rear stop: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2540 mm, 1 mm
Pull-out sheet metal support at the front, sheet metal slide placed at the front under the machine, hand back gauge, automatic hold-down device, dimensional grooves in the table Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2540 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: blue Machine weight: 500 kg Dimensions: 2800 x 1500 x 1400 mm Cutting gap adjustment fixed Automatic hold-down Fixed cutting angle Back gauge: 650 mm Machine Number: 6.1-5005
sheet width: 2050 mmplate thickness: 2 mmstrokes per minute until: 38 cutting angle: 1,75 °table height over floor: 870 mmtotal power requirement: 3 kWweight of the machine ca.: 1520 kgrange L-W-H: 2,2 x 0,6 x 1,2 mElectric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with astandard geared brake motor via a chain connection to the main axle. theknives are of the highest quality. The optimal cutting angle secures thetogether with the sheet holder perfect cuts.Bearings and guides are maintenance and lubrication-free.Standard equipment: • Back gauge 665 with mm scale. •cutting edge lighting. • Section counter. • Table extensions 600 mm. •Right angle stop, left. • Movable 24 V foot switch with em ...
Key data: 3100 mm, 3 mm
- CNC control and electric 3x 400V, 50/60 Hz - CNC backgauge 5 – 750 mm - Machine frame with knife bar - Hold-down device with plastic coating - Sheet metal hold-up system - Cutting sorting system to the front and rear - Foot lever for adjusting the cutting material diverter - Built-in special knives (suitable for stainless steel) - Cutting gap quick adjustment - Cut line lighting with LED - Standard table trays - Front clippings collector - Safety device - (Protective fence right and left, light barrier) Working length: 3100 mm Sheet thickness steel: 3.00 mm Color: white / grey / yellow Dimensions: 3920 x 2370 mm with hold-down device Throat: 5-750 mm Speed: 26 strokes/min with angle stop Cutting angle of/up to :1000 mm Cutting angle: 1.1 degrees Min. back gauge: 5 mm Max. back gauge: 750 mm
sheet width: 2000 mmplate thickness: 3 mmrear stop: von Hand, 750 mmnumber of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MVD B06-3100 hydraulic guillotine shears were built in 2014 in Turkey by MVD Inan Machine Tool Industry Co. The machine is used for precision cutting of sheet metal with a maximum thickness of 6 mm. The machining process is performed by means of high-quality cutting knives, set at an angle of 1.5°. Positioning of the material is facilitated by a work table with integrated balls, on which the workpiece goes directly under the cutting line. All this is complemented by a robust design with a reliable 10 kW main motor. The MVD B 06-3100 guillotine shears weigh approximately 6000 kg. Technical specifications of the MVD B06-3100 guillotine shears - maximum sheet metal length: 3100 mm - maximum sheet metal thickness: 6 mm - number of strokes (automatic mode): 30/min - number of strokes (manual mode): 18/min - cutting angle: 1,5° - minimum distance of light curtain from knife: 2030 mm ...
sheet width: 1050 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,40 tdimensions of the machine ca.: m- Shear angle adjustment- Motorized backgauge up to 1000 mm with fine adjustment via handwheel- Sharpened blades- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions Knife sharpened 1700 kg
sheet width: 1350 mmplate thickness: 3 mmcutting angle: 1° 30 no. of strokes: 35 Hub/mintable height: 850 mmrear stop: 450 weight of the machine ca.: 1200 kgdimensions: ca. 1700 x 1650 x 2000 mmmanually operated back gauge 450 mmworking lifght includedsafety gate includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1020 mm
Hand-held guillotine shears with adjustable stop (70 - 500 mm), scissors stand on a steel frame, Machine is sold in existing condition, without functional control, i.e. the machine will not be overtaken by us Working length: 1020 mm Sheet thickness steel: 0.75 mm Sheet thickness aluminium: 1.50 mm Colour: grey Machine weight: 150 kg Dimensions: 1700 x 550 x 1400 mm Hold-down manual
sheet width: / mmplate thickness: / mmdistance between columns: / mmtotal power requirement: kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...
sheet width: 2000 mmplate thickness: 2,25 mmdistance between columns: 2040 mmtotal power requirement: 7,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,2x1,7x1,1 mSN-No. 380/6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BAYKAL RGS 3150x3 electromechanical guillotine shears were built in 2007 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, distinguished by its high precision, is used for cutting of sheet metal with a maximum thickness of 3 mm. The machining process is performed by means of quality cutting knives with an adjustable gap between blades. The all-steel design, combined with a powerful electromechanical system, guarantees the highest cutting performance during even the most intensive challenges. The workspace is additionally protected by high-end light curtains made by FIESSLER ELEKTRONIK. All this makes the offered BAYKAL RGS guillotine shears an excellent choice for any industrial plant. Technical specifications of the BAYKAL RGS 3150x3 guillotine shears - maximum sheet metal thickness (Rm
sheet width: 2040 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,30 tdimensions of the machine ca.: mManual back stop up to 500 mmSide stop and table extensionsKnives sharpenedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2500 mm, 1 mm
Schechtl guillotine shears 2500mmx1.25mm in good condition with new knife and hand depth stop and foot switch. You will receive an invoice with VAT and net price. Shipping available worldwide. for questions Watsapp 0049(0)1607838365
sheet width: 6000 mmplate thickness: 6 mmdistance between columns: 610 mmControl: Elgo 87 P2total power requirement: 15 kWweight of the machine ca.: 22 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1020 mm, 2 mm
with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010
sheet width: 2040 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,30 tdimensions of the machine ca.: mManual back stop up to 500 mmSide stop and table extensionsKnives sharpenedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3200 mm, 2 mm
Motorized guillotine shears, can be operated from the front with manual depth stop 750 mm, with digital display Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.5 mm Farbe/Colour weiß/blau Total power requirement: 32 A Machine weight: 2220 kg Dimensions: 3700 x 2500 x 1600 mm without cutting gap adjustment Connected voltage: 3 x 400 V/50 hz Connected load :5.0 kVA Projection: 750 mm Min. back gauge: 750 mm Machine number: 2300840
sheet width: 2000 mmplate thickness: 2 mmdistance between columns: 2050 mmtotal power requirement: 3 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2 x 1,5 mguillotine shearsadjustable backgauge 600 mmgood conditionworking range: 2050 x 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg
sheet width: 3000 mmplate thickness: 3 mmweight of the machine ca.: t3 support arms1 angle stoppneumatic hold-down deviceBackgauge to be operated by handThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4050 mm, 6 mm
Year of construction 1988 Cutting length 4050 mm Cutting capacity 6 mm Weight approx. 8500 kg Knife renewed about a year ago.
sheet width: 1250 mmplate thickness: 3,0 mmdistance between columns: mmpower requirement: 2,2 kWdimensions: 3,27 x 1,69 x 1,29 mweight of the machine ca.: 1,6 tused compact mech. guillotine shear- strokes per minute: 50The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
QC11K 18×6000 hydraulic guillotine shears were built in 2018. This highly efficient machine is designed for precision cutting of sheet metal made from e.g. steel, non-ferrous metals, as well as selected plastics. Workpieces with a maximum thickness of 18 mm are machined by means of high-quality cutting knives with four cutting edges. All process parameters, on the other hand, are programmed on the intelligent DELEM CNC control with an intuitive interface and many useful functions. The QC11K 18×6000 guillotine shears weighs 40000 kg. Technical specifications of the QC11K 18×6000 guillotine shears - maximum cutting length: 6000 mm - maximum sheet metal thickness (Rm=420 N/mm2): 18 mm - maximum sheet metal thickness (Rm=700 N/mm2): 12 mm - work table height: 900 mm - back stop stroke: 1000 mm - adjustable gap between blades and cutting angle - motor power: 21 kW - power supply ...
sheet width: 2050 mmplate thickness: 3 mmstrokes per minute until: 35 cutting angle: 2,0 °table height over floor: 870 mmthickness at Niro-steel: 2 mmtotal power requirement: 4 kWweight of the machine ca.: 1550 kgrange L-W-H: 2,5 x 1,57 x 1,21 mElectric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine withall-welded link guides. The drive takes place with aStandard geared brake motor via a chain connection to the main axle. theKnives are of the highest quality. The optimal cutting angle secures theTogether with the rubber-covered blank holder perfect cuts.Bearings and guides are maintenance and lubrication-free.Standard equipment: • Back gauge 665 with mm scale. •cutting edge lighting. • Section counter. • Table extensions 600 mm. •Right angle stop, left. • Movable 24 V foot switch with emergency stop.• Motor protection switch and emergency stop. ...
Inv. Num. : 8497 Type: HSLX 3008 Producer: HACO Created: 2016 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 8 mm Back gauge: 1000 mm Equipment: Set of knives Truck with rear handling
sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 7,5 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2700 x 2300 x 1350mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FOR SALE FROM ESCRAPALIA HYDRAULIC GUILLOTINE SHEAR BRG 3000/16 – 3100 MM | IRON 16 MM | Stainless steel 10 MM Brand: BRG Model No.: 3000/16 Cutting length: 3100 mm Iron cutting capacity (450 N/mm²): 16 mm Stainless steel cutting capacity (700 N/mm²): 10 mm Cutting angle: 0.5–3 mm Main engine power: 22.75 hp Weight: 15,000 kg Disassembled in operation. It is sold where it is and as it is. Team visits available It uses and inspects more than 200 machines: lathe, milling machine, drill, grinding machine, saw, punching machine, bending machine and shear. Featured brands: Pinacho, Amutio Cazeneuve, Cumbre, Geminis, CMZ, Nicolás Correa, Zayer, Lagun, Ibarmia, Kondia, Danobat, Mebusa, Ajial, Geko, Samur, Sabi, Uniz, Lincoln Electric, Praxair, Solter, Galagar We load it on your transport Total Clearance Pricing Location: Fuenlabrada, Madrid (ES) Availabl ...
new
sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 3 kWweight of the machine ca.: 1,28 tdimensions of the machine ca.: 2600 x 1350 x 1260 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Large working width: 3050 mm for sheet metal (with a strength of 45 kg) up to: 6 mm Clear stand width: 3400 mm Cutting angle adjustable by hand: 0.5 - 3° Number of hydraulic hold-downs: 18 Stroke rate approx.: 9 - 17 /min Stop adjustment: 1000 mm Hydraulic drive: 380 V, 7.5 kW Space required incl. back gauge: 3600 x 1800 x 1580 mm Weight: 5200 kg
new
sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmpre-bending: siehe TD total power requirement: 3 kWweight of the machine ca.: 1,06 tdimensions of the machine ca.: 1260 x 1350 x 1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1550 mm, 3 mm
Machine Type: Guillotine Shears Manufacturer: KRAMER Type: TM1a Year of Make: 1987 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-KRA-1025-1 DESCRIPTION We offer you a used guillotine shears from the manufacturer Kramer. Expected to be available from 10/07/2025 Cutting width max. 1550mm Cutting capacity max. 3.25mm Back gauge 550mm Weight 2065kg Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,23 tdimensions of the machine ca.: 3200 x 2300 x 1350 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
gebr. Guillotine shears, Helmut Lotze, type 205.3000x16, built 1992 Working width: 3040mm Max. sheet thickness: 16mm Stand width: 3040mm Throat: 200mm Stroke width: 1000mm Motor power: 45kW Stroke rate: 22/min.
RICO HGR 310 hydraulic guillotine shears were built in 2013 in Portugal by Rico Tomás Castro Silva, LDA. The machine, designed for machining of sheet metal with a maximum length of 3050 mm, offers high reliability, efficiency and precision. The machining process is performed by means of high-quality cutting knives with the ability to adjust the cutting angle according to the thickness of the material. Constant press force and balance during cutting are ensured in turn by synchronised movement of the cylinders with the flow of hydraulic fluid from one cylinder to another. All this is complemented by a fully welded design, which has undergone a number of technological operations to minimise deformation and ensure maximum durability. The HGR 310 guillotine shears weighs 8700 kg. Technical specifications of the RICO HGR 310 guillotine shears - NC control - maximum workpiece thickness ( ...
Little-used guillotine shears, only occasionally 1.5 mm sheet thickness Stroke rate 56/ min. Power (Rm 400/mm) 3.5mm Rated power 4.0 kVA Weight 860 kg
Key data: 3050 mm, 6 mm
3000 x 6mm Elgo P50 Rear sheet supports
Key data: 4000 mm
Ref.Nr. 00883 Name of the system: Used guillotine shears Manufacturer I.MA. L Model CESO1A Speed 64 Year of construction 2003 Working range 4m Dimensions 3700 x 1950 x 2100 mm Weight 8500 kg Press safety test according to BGR 500 lt test report. Next exam in January 2026
Key data: 3100 mm, 6 mm
Hinged backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3100 mm Sheet thickness steel: 6.0 mm Sheet thickness front: 4.0 mm Colour: grey/blue Total power requirement: 11 kW Machine weight: 900 kg Dimensions: 4000 x 2150 x 1640 mm Cutting gap adjustment: 0.05 -0.80 mm Hold-down: 14 Stroke rates per minute approx.: 19 stroke/min Cutting Angle: 1.2 Adjustable back gauge Back gauge: 1000 mm Machine number: SN20080583
Description Guillotine Shears Hera HSS-5 Details Machine no. 511 Year of construction 1982 Cutting capacity 10 mm to 2m width with spare blade
