pharmaceuticals and cosmetics machines used for sale (413)

Blister Machine Manufacturer: Uhlmann Type UPS 1070 Output 15 – 200/cycles min. Film width min. 150 mm – max. 300 mm including colour and filling material control, make Scanware, type LYNX Spectra CL/HR Blister machine with side channel blower 2016 new sealing head with adjustment dome Dimensions: 8000 mm length x 1800 mm width x 1900 mm height, weight approx. 7 tons

Powder mixer in mint condition with self-priming centrifugal pump Fristam FZ Manufacturer: Fristam Type PM 02 17-52 Year of construction 2022 Serial No. 097274 0004 309372 Total weight 420 kg Capacity 5-10 m³/h Centrifugal pump type FZ Power 4.0-5.5 kW Homogenizer FSP 3522 Power 4.0-11.0 kW Dimensions: L 1700 mm x W 1000 mm x H 800 mm

Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.

High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min.

Mixer Manufacturer: Bohle Type LM 40 Stainless steel construction Payload 40 kg incl. mixing tank Timer Mixing speed 5-50 rpm, 230 volts All contact parts made of 316 stainless steel, excellent condition Incl. the following mixing tanks: 1x MC 5 - New Device 1x MC 2 - New device 2x MC 1 - New device 1x MC 10 - New Device 2x MC 10 - used

Mixer Manufacturer: Bohle Type LM 40 Stainless steel construction Payload 40 kg incl. mixing tank Timer Mixing speed 5-50 rpm, 230 volts All contact parts made of 316 stainless steel, excellent condition Incl. the following mixing tanks: 1x MC 5 12x MC 10 2x MC 20 3x MC 40 5x MC 50

150 l stainless steel container Manufacturer : Sartorius Technical specifications : - 150 litre stainless steel tank heatable, double jacket Interior: -1/+3 bar pressure and vacuum resistant Operating temperature 150 °C Double jacket: -1/+4 bar pressure and vacuum resistant Operating temperature 150 °C Documents available - GMP standard mobile

Agitator bead mill / bead mill Manufacturer: Netzsch Type LMZ 2 – ZETA system Power 6 kW Weight approx. 280 kg Grinding chamber volume approx. 1.6 litres Regrind volume approx. 0.8 litres Grinding vessel cantilevered attached Agitator speed infinitely adjustable via frequency converter Drive from the motor via belt drive to the drive shaft. Documents available

Test chamber for stability tests Manufacturer: Vötsch Type VP 1300 Pharma For investigations of the shelf life of medicines. The test systems of the VP series have been specially developed for the requirements of laboratories according to the ICH guidelines Test room volume: 1300 l Temperature test: +10 °C to +50 °C, +5 °C to 60 °C Climate test: +10 °C to 50 °C Nominal power 2.7 kW Humidity range: 20% to 90% RH Weight 250kg Documents available

Test chamber for stability tests Manufacturer: Vötsch Type VP 1300 For investigations of the shelf life of medicines. The test systems of the VP series have been specially developed for the requirements of laboratories according to the ICH guidelines Test room volume: 1300 l Temperature test: +10 °C to +50 °C, +5 °C to 60 °C Climate test: +10 °C to 50 °C Nominal power 2.7 kW Humidity range: 20% to 90% RH Weight 250kg Documents available

Tablet press Manufacturer: Röltgen Type Oystar Manesty FlexiTab Pressing force upper punch 2-100 kN Compacting of the first layer 2-6 kN Ejection force lower punch 7 kN Output of single-layer tablets approx. 15 pieces/min. Output Two-layer tablets approx. 8 pieces/min. Output of three-layer tablets approx. 5 pieces/min. Compacting of the first layer in multi-shift operation 2-6 kN Dimensions H x W x D - approx. 1980 x 1420 x 720 mm Weight with frame approx. 800 Kg Documents available

Homogenizing Mixer Manufacturer : Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres Equipment: Agitator with wall scraper 20-160 rpm Left-hand rotation/counterclockwise rotation and alternating left-right rotation Homogenizer 500-6,600 rpm Surface in the product room is highly polished The following components are integrated: Vacuum pump Heating PLC control PC with process visualization and automation software Documents: available

Homogenizing Mixer Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber

Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells.

Homogenizing Mixer Manufacturer: Becomix Type RW 1000 CD Capacity 1000 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 1000 liter pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells

Stainless steel vacuum vessel with EKATO FLUID Mixer TYPE FGL-25D (mixer new 2005) vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C

Centrifugal pump, 11kw, inlet/outlet DN 80 to DN 100 PN16 (DIN2633)

Centrifugal pump, motor 7,5hp/11,5kw; 1400RPM;60m3/h; Id No: 21973. Closed hygienic centrifugal pump with open impeller. The pump meets the highest requirements of the food, pharmaceutical, chemical and water treatment industries. Parts in contact with the working environment are made of stainless steel CF-3M 1.4404/AISI 316L. The clamp body and seal are designed to be quickly disassembled for inspection, cleaning and maintenance. All dimensions are indicated in the drawing. The passport contains the following technical characteristics: liquid lifting height up to 25 meters, volume of pumping liquid up to 1000 l/min (60 m3/h)

Centrifugal pump, inlet/outlet 51/51mm, motor ABB Motors 4kw 1420 rpm 20m3/h

Centrifugal pump, motor 1,5kw, impeller size 160mm, max 18bar 55m3/h, 2800rpm, inlet/outlet 65/51mm

Centrifugal pump, motor 1,1kw, Impeller size 130mm, max 18bar, 33m3/h 2800rpm, inlet/outlet 51/51mm

The SolidC UltraPure pump is an efficient and economical centrifugal pump that meets the requirements of pharmaceutical industries. It handles products gently and resists chemical agents., Pump: Centrifugal pump , dn (mm): 34 , Dn (mm): 34 , engine type: WEG, Engine power: 380 V 50 Hz 7.5 kW , Link to manufacturer: .alfalaval.fr/produits/transfert-des-fluides/pompes/pompes-centrifuges /solidc-ultrapure/

Lobe pump, Motor type: SK 160L/4 TF, Engine type: SK 160L/4 TF, Engine power: 50 Hz 15 kW 380 V , Link to manufacturer: .alfalaval.fr/, Dn (mm): 77, Pump: Obe pump , dn (mm): 77

BPG glass chromatography column., Inner diameter (mm): 200, Total volume (L): 16, Lower tapping: 1, Bottom stitching: 1, Top tapping: 2, Lower stitching: 1, Top stitching: 2, Top nozzle: 2

MANESTY ACCELACOTA laboratory coating turbine Perforated turbine with counter blades Spray arm For batch sizes around 10kg, Dimensions (mm): 1300x860 H 1650mm, Inner diameter (mm): 600, Depth (mm): 440, Perforated impeller: Yes, Perforated turbine: Yes, Batch size: 15kg, Weight (kg): 386

Machine: Horizontal automatic cartoner with reciprocating motion. Product: Blisters, strips, trays, rigid or flexible tubes, bottles, sachets, soap bars, and other food or cosmetic products. Materials: Cases with opposing or alternating flaps made of solid board with a basis weight ranging from 220 to 400 g/m², pre-scored and pre-glued. Closing: By tuck-in flaps or by hot glue applied using commercially available spray nozzles., Cadence / min: 20 to 140 cycles/min , Elec: 400 V / 50 Hz / 8.6 A , A + B (mm): max 140 , A (mm): min 15 / max 90, B (mm): min 12 / max 70 , C (mm): min 50 / max 200

Useful capacity of the product tank: 50 litres Total capacity up to the edge of the tank: 80 litres Operating overpressure in the product tank: -1/+2.0 bar Maximum temperature in the product tank: 125 °C Operating overpressure in the double jacket: 4.0 bar Maximum temperature in the double jacket: 140 °C Stainless steel: 1.4435 1350 Kg Variable motor speed: Outer mixer arm: 11-44 rpm Inner mixer arm: 21-84 rpm Homogeniser: 1150-4350 rpm, Volume: 80 liters , Useful volume: 50 liters , Hustle: 3 types of agitation: outer arm / inner arm / homogenizer , Elec: 380 V / 50 Hz, Cover diameter: 119 mm, Mobile tank: No, Double envelope: Yes, Double envelope volume: 13 liters , Double envelope pressure: 4.0 bar , Weight (kg): 1350

Single stainless steel jacket tank of 110 liters Operating pressure: 2 bars 3 tappings + 1 CIP ball (cleaning in place) Possibility of fixing an electrical panel laterally and connecting an agitator at the bottom of the tank, Enquiry: Request more information, Request for information: Request more information, Information request: Request more information

equipped with a LAETUS system bottle tilter Was previously used on a syrup line, Elec: 380V 50Hz, A + B (mm): 140 mm max, A (mm): 15 - 90 mm, B (mm): 12 - 70 mm, C (mm): 50 - 200 mm, Dimensions (mm): 2280 x 1570 mm, Height (mm): 1755 mm, Documentation: X in Spanish