subcategories
(3rd category level)
Manufacturer:
(Category: 409)
Auction-ID: A1-40969-251
Auction-ID: A1-40969-45
- Rotating base with a diameter of 2500 mm, with 2 rollers. - Maximum height of the piece to be packed approx. 2200 mm. - Dimensions of the stretch film reel: height 500 mm, outer diameter 235 mm, inner diameter approx. 75 mm. - Adjustable parameters. - Separate electrical control panel. - It must be mounted in a pit approx. 550 mm deep. - The stretchable plastic pallet shown in some photographs is NOT included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-42185-10
In wooden box / including 16 rolls of metal strapping band Auction-ID: A1-40780-326
Auction-ID: A1-40972-82
Auction-ID: A1-40972-78
Auction-ID: A7-42176-1
Pallet dispenser system System with a pallet dispenser consisting of a dual-row pallet dispenser (dimensions 2,700 × 1,600 × 2,100 mm), a motorized roller conveyor (dimensions 3,500 × 1,400 × 600 mm) and a motorized roller conveyor on rails (dimensions 1,500 × 1,400 × 600 mm). Overall approximate dimensions of the complete system (L × W × H): 5,000 × 1,600 × 2,100 mm. The pallets shown in the photographs are not included. Functionality not tested. The lot is delivered loaded on a truck. Dismantling and loading costs are indicated as additional costs. Auction-ID: A7-41004-49
Fully automatic stretch winding machine Spinny S2300 with electromechanical nider holder Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly rate: approx. 20 pal./hour (depending on pallet height and type of winding) Conveying height: 500 mm Technical specifications: • Winding cycle, programmable via the electronic control panel and SIEMENS S7-1200, KTP700 Control Panel • Control SIEMENS PLC S7 1200 SAFE and HMI KTP700 • 15 freely programmable winding programs • Turntable stop in the end position • Conveying height: 500 mm • Usable width of roller conveyor: 1000 mm • Photocell for autom. Pallet height detection • Clamp for attaching the film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency converter for adjusting the turntable speed 5 ...
Herbert Gemini weigh price labeller from 2003. Weighing range: - Max weight: 4 kg - Min weight: 0,1 kg Weight precision: 0,002 kg Labelheight: - Applicator no 1: 150mm - Applicator no 2: 400mm Packs per minute range: - Minimum speed: 1 per minute - Maximum speed: 100 per minute Conveyor width: 225mm Year of production: 2003 Serial number: 20251005 Condition: good Dimensions: - Checkweigher: 1.600mm x 750mm & 1.750mm (LxW&H) - Labeller & printer: 1.800mm x 1.000mm & 2.100mm (LxW&H)
SF WeighStation checkweigher. Double rejects for both under- & overweight weighins. Conveyor width: 600mm Year of production: 2014 Serial number: SF 589314.738 Dimensions: 2.850mm x 1.200mm & 1.800mm (LxW&H)
Loma 6000 checkweigher. Push reject for over- and underweight weighins Maximum weight: 6 kg per product Weight precision: 0,6 gram Speed: 250 products per minute Finish: 304 stainless steel Conveyor width: 140mm Year of production: 1999 Serial number: ACW-40540-010733 Condition: good Dimensions: 1.800mm x 900mm & 1.100mm (LxW&H)
Thermo Ramsey Accustar checkweigher. Maximum product weight: 4 kg Weight precision: 1 gram Speed: 90 metres per minute Conveyor width: 225mm Year of production: 2003 Serial number: 5512 Condition: good Dimensions: 1.650mm x 1.000mm & 1.850mm (LxW&H)
Liebel Wäge- und Sortiertechnik USS – 4 checkweigher from 2002. Weighing range: - Max weight: 750 gram - Min weight: 50 gram Weight precision: 1 gram Speed: 120 packs per minute Conveyor width: 200mm Year of production: 2002 Serial number: 02003 Condition: good Dimensions: 1.300mm x 750mm & 1.650mm (LxW&H)
K.S. Automatik elevator from 2006. Conveyor width: 160mm Year of production: 2006 Serial number: 7 Condition: good Dimensions: 1.300mm x 600mm & 1.300mm (LxW&H)
This Palletising line consists of, Box transport belts, KRONES, Type 465, Model Κ465-924, Y.o.M 1999, Maximum width 350mm/ total length 13m/ 6 pieces (2m/piece)/0.75KW- 400V/ control panel, Palletizer, KETTNER, Type BELADER PRESS ON, Model 99/0441/004, Y.o.M 1999, Available control panel (30 pulses/hour in 61.5L box), Empty pallet station with finished pallet exit roller conveyor, KRONES, Type 454, Model LPMT, Y.o.M N/A, Maximum number of empty pallets: 15pcs/ Available control panel/ 100pallets/hour, Strech Wrapping Machine, FRANPACK, Type 101, Model 991553, Y.o.M 1999, Available control panel, Protective barriers with safety switches, Available with the machines, Available: Immediately , Pallet Sizes: 100 x 120 cm , Capacity: 100 pallets per hour , Condition: Good
The machine is ideal for short lengths (30, 50 or 100m) either in full width, or you can also divide into different widths, from a maximum of 1600 mm. Thanks to the 4 take-up shafts, the machinist is able to unload and position a new sleeve while the machine is still winding. This brings an enormous amount of extra power at the end of the day, as there are only short downtimes. The machine is still in daily use and sample materials can be tested daily. We would then disassemble the machine, pack it and put it on a stable pallet. 20ft containers can be loaded via the ramp.
A Haver & Boecker bagging machine is available as a test machine for filling various powdery bulk materials including an MEC 3 weighing electronics. Weighing range: 10kg-50kg, adjustment increment: 50g, bag filling weight: 25kg, bagging capacity at 25kg: approx. 180/h, max. product moisture: 0%, product filling temperature: 20°C, bag material: 2-layer paper/PE with filter fleece. Documentation vorhanden. An on-site inspection is possible.
New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...
SRE Maxi Function: Punching, creasing, cutting (longitudinal/crosswise), printing and folding in one operation Material: Single, double and triple corrugated cardboard Material thickness: from approx. 2 mm to 16 mm thickness Working width: 2,500 mm Working length: 10,000 mm Various additional tools available FPU Printers Roller circumference: 2,500 mm Printing: 1-color flexographic printing Lift table front Roller conveyors in the middle and rear
Flatbed die-cutter from Drössert max. format: 750 x 1050 mm If required, a wide variety of tools are also available for this purpose.
Circular shears from Universal - Grooves - Scoring - Cutting Working width: 2,600 mm including automatic destacker (width: 2,500 mm)
Manufacturer: Koenig & Bauer Model: Omega Intro 800 Year of Manufacture: 2022 Type of Machine : Folding Carton Folder-Gluer Machine Technical specifications - Lower belts: 20 mm, upper belts: 19 mm - Easy adjustment of upper transport units for different carton thicknesses - Standard bearing sizes - Maximum belt speed: 300 m/min - Air consumption: 6–8 bar - Machine length including side register: 12,800 mm - Solid machine frame thickness: 15 mm - CE certified - EC Machinery Directive 2006/42/EC - EMC Directive 2014/30/EU - Low Voltage Directive 2014/35/EU - Easy belt change without removing shafts - Position indicators included Feeder section - 6 feeder belts, 26 mm - Adjustable vibration motor and infeed assistance to separate blanks and prevent gaps or double feeding - 2 adjustable stacking supports in different sizes - Two hardened side guides, independently adjustable in f ...
A semi-automatic 1-head pneumatic jar closing machine Lenssen Vul-En Sluittechniek is available. Closing capacity: 720jars/h, operating pressure: 6bar, machine dimensions X/Y/Z: approx. 500mm/500mm/800mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.
Minislotter from Klett Working width: 100 x 1420 mm Passage length: 100 x 600 mm Year of Make: 1993 including automatic destacker from fossaluzza
Corrugated cardboard shredders (mats) Type: 55422118 Year of manufacture: 2018
Taper of the Neubronner brand Lift table front and rear Type ML 4200 / 2030 No. 360 Year of Make: 1986
Specifications: Grammatur: 100 - 600 gsm Max. width: 740 mm Max speed: 150 m/min With Robatech hot melt system (including 3 nozzles), Special equipment: Premium Edition Boxes:, - Longitudinal seam and automatic bottom, - Additional glue nozzle, - Plastic guide with special holder, - Set of folding hooks, - Pre-breaking unit for longitudinal seam boxes up to L = 250 mm, W = 300 mm., - Pre-breakers for larger boxes require a second transport module, Included in the High-End Edition:, - Set of pressure rollers (1 x 7s wheels, 2 x 6, 2 x 3, 1 x 3sil, 2 x Isil), - 4 cross beams and 8 clamps, - Alignment aid for cardboard ≥300 g/m² and edge length >125 mm, Grammage: 100 - 600 gsm, Max. width: 740 mm, Maximum speed: 150 m/min
Fully automatic capping machine PMFS100. High-precision mechanical design for seamless bottle positioning. Sliding cylinder modules for cap tightening. Intelligent control system with touchscreen. Electrically and pneumatically driven. Surfaces made of stainless steel or food-grade plastics (GMP-compliant). Suitable for mass production. Production capacity: 120 bottles/min, compressed air: 0.6kg/cm², air consumption: 20m³/h. Inspection possible by prior arrangement.
Surplex GmbH 
10.000 € 
