We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 1200)
used
Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw
used
There are two identical suction units available, volume flow: 7310m³/h, pipe diameter: 300mm, pressure increase: 2700Pa, rotational speed: 3000/min, length: 2000mm, width: 1300mm, height: 4500mm.
used
Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30
used
Hydraulic pressure: 150bar, connected load: 32kW, including two containers.
The basic design of the splitter package was completed in 2011 by Linde Engineering, with equipment procurement occurring between 2012 and 2013, based on the detail design by BARAN Engineering The splitter package's function is to process raw propylene feed into purified propylene, with a concentration of 98.25%vol, suitable for use as a feed in polypropylene plants. The process package includes both pretreatment and posttreatment purification stages. Designed to handle two grades of raw propylene simultaneously, namely refinery grade (75-77%) and chemical grade (90-92%), the process flow involves predrying the refinery grade propylene in molsieve (3A) dryers, followed by stripping in a column to remove light ends. The chemical grade propylene is fed directly into the splitter column due to its higher quality. The splitter column has two different feed trays to accommodate bo ...
used
There are two identical machines available, rotational speed: 12.5/min, cylinder weight: 14.7t, length: 6890mm, with documentation, an inspection is possible.
used
Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.
used
Max. operating temperature: 150°C, compressed air supply: 6bar, power: 33kW, weight: 1.85t.
used
used
Operational pressure: -1 to 4bar, workpiece temperature: -10 to 150°, capacity: 102,200l, height: 22,700mm, width: 2950mm, weight: 31.5t, was used for storing acrylic acid.
used
Material: CrNi steel, rotational speed: 1000-3000/min, pump output: 1-2m³/h, connnected load: 1.2kW, machine was not used much.
used
Normal steel, length. 9.00 m, Diameter: 420 mm, outlet: round D = 300 mm Drive: Gear motor 4.0 kW with max. 100 UPM
used
Capacity: 9670l, weight: 2.3t, with agitator.
used
Power: 22 m3/min., Delta P 320 = mbar, 30 kW, (10.6 kW at 1690 RPM)
used
Max. rotational speed: 2500/min, max. capacity: 80kg, inner drum diameter/ height: 500/ 603mm, wall thickness: 16mm, operational hours counter: a few hundred.
used
Mild steel, length. 10.20 m Diameter: 420 mm, spout: 300 X 300 mm,. Drive: gear motor 7,5 kW Max. 135 RPM
used
Capacity: 400l, operational overpressure: -1 to 3bar, rotational speed: 32-1400/min, operational hours counter: 5003h, documentation available.
used
used
Capacity: 400l, operational overpressure: -1 to 3bar, rotational speed: 32-1400/min, operational hours counter: 4234h, documentation available.
used
Normal steel Volume: 25 litres, drive: 3 kW
used
System includes (1) Dekanter FLOTTWEG X4E-4/ 454, output: 30m³/h (2) Sludge Pump NETZSCH AGNM02 (3) Polymer Pump NETZSCH, as well as thick matter pump, polymer dosing pump, flow measuring devices and additional elements, operational hours counter: 7919h. Max. Operating current 63A, as the main switch in the control cabinet is rated for 63A. A 125A CEE supply line is required for operation.
used
Mild steel, Basket length: 800 mm, diameter Siebkrob: 300 mm,. Drive: 4 kW, with a colander
used
With cryogenic cooling system, was maintained regularly, including spare parts and extensive documentation.
used
used
With cryogenic cooling system, was maintained regularly, including spare parts and extensive documentation.
used
used
A distillation machine for the separation of colors and solvents is available. Filling capacity: 25l, solvent distillation time: approx. 4h-5h, rinse water distillation time: approx. 13h, cooling time: 3h-7h, operating temperature: 50°C-200°C, power: 2kW, oil type: Essotherm 500, oil capacity: 12l, cooling type: air cooling. Dimensions X/Y/Z: approx. 600mm/1000mm/1200mm, weight: approx. 130kg. Documentation available. On-site inspection is possible.
used
used air sifier with SEW gear motor with 3 kW
used
Volume flow: 1000m³/h, max. depression: 10,000Pa, motor power: 5.5kW, weight: 350kg.