CNC Pressbrakes used for sale (116)

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

Brand: Metaleen Tools & Equipment (visible on the frame of the machine). Type: WE67K-160T/3200. Year of manufacture: 2025, deduced from the serial number/order date. Serial number: 2025040195. Capacity t: 160 tons. Working length mm: 3200 mm. Control, brand, type: Delem DA-53T-[N], serial number 244400017, Delem PN D8087-007, software version V1.8.23, produced by Delem, Eindhoven (NL). Auction-ID: A3-46142-11241

Key data: 40 t, 1500 mm

1500 x 40 ton Cybelec Cybtouch 12" X & Z Axis

Key data: 135 t, 3100 mm, 2600 mm

Control DELEM DA 69T the machine was distributed by Knuth and manufactured in Turkey. Pressure capacity 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Projection 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm X-axis travel 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power main drive 15 kW Hydraulic tank capacity 250 l Bwebpxv Izez Hmxujpeu Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some stamps and dies are included (see pictures) Viewing possible under power.

pressure: 80.0 tchamfer lenght: 2570 mmdistance between columns: 2125 mmcolumn arm: 420 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secstroke: 200 mmdayligth: 470 mmtable height: 960 mmNumber of working hours: ~ 33.100 hoil volume: 90.0 ltotal power requirement: 9.0 KWweight of the machine ca.: 5750 kg.range L-W-H: 3630 x 2450 x 2550 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=SskqZJdQxsQhttps://www.youtube.com/wat ch?v=KcKjibwWAKIEquipment:- AMADA CNC control, model OPERATEUR II Manual control for fine adjustment of the axes- CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2)- CNC-controlled backgauge adjustment (X1 X2)- CNC-controlled vertical adjustment of the fence fingers (R1 R2)- CNC-controlled adjustment of the stop fingers left-right (Z1 Z2)- Swivel operation, front left- 1x freely movable  ...

The machine is in good technical condition; testing is possible by prior arrangement. NC-controlled X and Y axes, manual crowning table, backgauge extension to 1000 mm, Fiessler Akas Laser safety system, sectional tooling (upper: 30°, R 0.8 and 3 mm). Not used since 2019.

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmdayligth: 320 - 560 mmstroke: 240 mmworking feed: 10.0 mm/secreturn speed: 150 mm/seccolumn arm: 400 mmwork height max.: 1050 mmcontrol: DNC 1200 PS/B operating pressure: max. 297 barcompressed air: 4.5 - 6.0 barconnected load: 15.0 kWoil volume: 250 ltr.weight: 11500 kgrange L-W-H: 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing- in checked conditions - machine Video -https://www.youtube.com/watch?v=z-Bxibk_8uEFeatures:- CNC Electro-Hydraulic Press Brake- CYBELEC CNC Control Model DNC 1200 PS/B Swiveling Control Panel, Front Right Numerical Programming Tool & Program Library- CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning- CNC Electro-Motorized Backgauge (X-Axis) with 3x Manually Adjustable Backgauge Fingers (Z-Axis) Maximum Travel Speed: 250 mm/sec- CNC electro-motorized height ...

Key data: 50 t, 2000 mm

with 3-axis CNC control (Y, X, R) With Hydr. Foot pedal (with lock) incl. 1 set of bending tools (punches and dies) 3800 kg Loading onto truck included

pressure: 85.0 tchamfer lenght: 2050 mmdistance between columns: 1650 mmcolumn arm: 400 mmstroke: 240 mmdayligth: 320 - 560 mmajustment speed: 150 mm/secworking feed: 15.0 mm/secreturn speed: 150 mm/secback stop - adjustable: 5.0 - 1000 mmtable width: 110 mmwork height max.: 1050 mmoperating pressure: max. 297 barcompressed air: 4.5 - 6.0 baroil volume: 200 loperating pressure: 340 bartotal power requirement: 7.5 kWweight of the machine ca.: 5900 kgrange L-W-H: 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=ikl6RNZWeiUEquipment:- CNC electro-hydraulic press brake- including CYBELEC CNC control swiveling control panel at the front right external screen- CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning- CNC electro-motorized back stop (X axis) Trave ...

Key data: 100 t, 2500 mm, 2050 mm

Hydraulic press brake HACO ERM 25100 Year of Make: 2005 100Tx2500 Light barrier: Fiessler AKAS Tool holder: AMADA Promecam Type A tool holder Back gauge: Controlled X-R-Z1-Z2 axles New control system 2026! Immediately available! To be viewed under power!

pressure: 100 tchamfer lenght: 4100 mmdistance between columns: 3700 mmcolumn arm: 415 mmstroke: max. 215 mmdayligth: 410 mmajustment speed: 200 mm/secworking feed: 10.0 mm/secreturn speed: 150 mm/secwork height max.: 1080 mmtable width: 100 mmControl: CYBELEC oil volume: 160 ltr.voltage: 400 Vpower capacity: 8.5 kWweight: 10200 kgrange L-W-H: 4800 x 1800 x 2600 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=Phcik_oo4CEEquipment:- BEYELER electro-hydraulic CNC press brake- CNC CYBELEC control unit DNC 1200 PS/B” High-resolution screen Clear, concise menus in the operators language Tool and product library Swiveling control panel, front right- CNC-controlled axes (Y1+Y2-X)- CNC-controlled backgauge adjustment (X-axis) 2x manually adjustable stop fingers - Manual upper tool clamping- Manual lower tool clamping- Rear safety device (safety door)- Side safety dev ...

Key data: 50 t

Manufacturer: AMADA Model No.: HFT 50-20 Year: 2006 Condition: Used Stock number: 9544 Compressive force: 50 t Maximum bending length: 2085 mm Maximum distance between columns: 2665 mm Axis: 4 Throat depth: 420 mm Maximum ram stroke: 200 mm Machine weight: 4850 kg

pressure: 180 tchamfer lenght: 3110 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/secback stop - adjustable: max. 750 mmstroke: 260 mmdayligth: 460 mmtable height: 880 mmoil volume: 210 ltr.operating pressure: max. 240 barcontrol: DELEM total power requirement: 15.0 kWweight of the machine ca.: 11.200 kg.range L-W-H: 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on requestFeatures:- Electro-hydraulic CNC press brake- With DELEM CNC control model DA 66W” 2D graphic programming Automatic bend sequence calculation and collision detection High-quality LCD screen (TFT) Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning- CNC electric motor-driven backgauge (X axis) with 2x manually adjustable stop fingers- CNC electric motor height adjustment of t ...

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=PBV-MDtZnlEEquipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface- CNC controlled axes: Y1 + Y2  ...

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. Ibjbmlszymb Seurhasb 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

pressure: 50.0 tchamfer lenght: 1275 mmdistance between columns: 1040 mmcolumn arm: 250 mmram stroke speed: 225 mm/secwork speed: 0 - 9.8 mm/secreturn speed: 160 mm/secwork stroke: 215 mmdayligth: 512 mmtable height: 800 mmback stop - adjustable: 600 mmcontrol: DELEM DM 51 operating pressure: max. 300 baroil volume: 150 ltr.voltage: 400 Vengine output: 6.0 kWWeight: 4300 kgrange L-W-H: 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=5L8L2AYv0PU-------------------------- -----------------------------PLACKE electro-hydraulic CNC press brakespecially developed for the production of small partsThe advantages:• Low energy consumption• High operating comfort• Wide range of applications• Fast, robust, low-noise• With CNC control as standard-- ...

Key data: 135 t, 3050 mm

Manufacturer: DURMA Model No.: AD-R 30135 Year: 2021 Condition: Used Stock number: 9506 Compressive force: 135 t Maximum bending length: 3050 mm Axis: Y1/Y2 Machine height: 2975 mm Machine length: 4100 mm Machine width: 1900 mm Machine weight: 10500 kg

pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=Gn6PZEMmnmYFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustabl ...

Key data: 85 t, 2000 mm

Manufacturer: Trumpf Model: TrumaBend V 850 Year: 2005 Condition: Used Stock number: 9488 Operating hours: 122000 h Compressive force: 85 t Maximum bending length: 2000 mm Stroke: 215 mm Machine weight: 7300 kg

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmtable width: 120 mmtable height: 900 mmcolumn arm: 320 mmreturn speed: 100 mm/secworking feed: 10 mm/seccontrol: Cybelec DNC 70 quantity of oil: ca. 250 ltotal power requirement: 11 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille)Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

pressure: 170 tchamfer lenght: 4080 mmdistance between columns: 3680 mmcolumn arm: 410 mmdayligth: 385 mmstroke: 215 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 200 mmtable height: 1050 mmNumber of working hours: 25.430 hoil volume: 350 ltotal power requirement: 29 KVAweight of the machine ca.: 16.450 kg.range L-W-H: 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4Equipment:- CNC electro-hydraulic press brake/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tool and product library Graphic 2D programming Automatic bend sequence calculation and collision detection Emergency stop button at front - CNC  ...

Key data: 200 t, 3100 mm

Bending capacity 200 ton Bending lenght 3100 mm Number of axes 4

pressure: 40.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 200 mmstroke: 100 mmdayligth: 308 mmajustment speed: 150 mm/secworking feed: 1-10 mm/secreturn speed: 100 mm/sectable width: 100 mmtable height: 900 mmcontrol: DNC 60 PS oil volume: 100 lvoltage: 400 Vtotal power requirement: 5.5 kWweight of the machine ca.: 2750 kg- in checked conditions - machinevideo - https://www.youtube.com/watch?v=WRzqKruFUvYEquipment:- CNC electro-hydraulic press brake- CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library- CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws- CNC controlled axes Y1 - Y2 - X- Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder- 4V universal die block with 60 mm die shoe- 2x slidi ...

Key data: 45 t, 2000 mm

Manufacturer: Gasparini Model No.: PBS 045 Year: 2000 Condition: Used Stock number: 9391 Compressive force: 45 t Maximum bending length: 2000 mm Machine weight: 3450 kg

pressure: 200 tchamfer lenght: 3600 mmdistance between columns: 2650 mmdayligth: 500 mmthroat: 300 mmstroke: 250 mmworking feed: 10,5 mm/secreturn speed: 100 mm/secram stroke speed: 150 mm/sectable height: 900 mmoil volume: 500 ltotal power requirement: 37 kWweight of the machine ca.: 17800 kgdimensions of the machine ca.: 3710 x 1800 x 3390 mmEquipment:- Controlled axes Y1 + Y2- Manual X-axis with digital position display- Set of upper and lower tools- 2x stop fingers- 2x front support arms- Hand and foot controls- Side + rear safety guard- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 t, 2600 mm

Manufacturer: ERMAKSAN Model: Speed-Bend Pro 2600×100 Year: 2022 Condition: Used Stock number: 9340 Control system: Delem DA-66T Press force: 100 t Maximum bending dimension: 2600 mm Motor power: 11 kW Machine height: 2550 mm Machine length: 4350 mm Machine width: 2500 mm Machine weight: 6273 kg Equipments: Back stop Front Support Arms Foot control Safety Covers Bending fixtures

chamfer lenght: 3020 mmplate thickness: mmdistance between columns: 2555 mmpressure: 220 tstroke length max.: 350 mmtravel -x axis: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 t, 2050 mm

Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control - 3 controlled axes (Y1, Y2, X) - Manual Wila crowning table - 2 adjustable support arms - Light barriers - Incl. bending tools & operating instructions - Year of construction 2008 Technical data - Pressing capacity: 40 t - Bending length: 2050 mm - Distance between stands: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Projection: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

pressure: 50 tchamfer lenght: 1500 mmdistance between columns: 1220 mmControl: Cybelec DNC 1200 closing speed: 95 mm/minworking feed: 1-10 mm/secwork stroke: 156 mmoverrun time: 59 mstracking travel: 6 mmthroat: 200 mmdistance table - lower edge of ram: 301 mmtable width: 160 mmtable height: 850 mmx-axis: 550 mmtravel R-axis: +/- 50 Number of axles: 3 (Y, X, R) St.weight: ca. 3600 kgdimensions: mma lot of lower and upper toolsincl. work lightnew control in 2003: Cybelec DNC 1200The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 t, 350 mm, 310 mm

Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 255 mmstroke: 165 mmdayligth: 475 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/sectotal power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1500 x 2470 mmEquipment:- DELEM DA65 CNC control- Electric backgauge (X-axis), 600 mm- Hydraulic upper tool clamping- Front light barrier- Side and rear protective grilles- Manually adjustable stop bar, foldable (R+Z-axis)- Upper tool- 2x support arms- Machine feet- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 t, 2600 mm

Inv. Num. : 9319 Type: CNC HAP 2680 Producer: Ermak Created: 2006 Parameters: Control system: CYBELEC Compressive force: 80 t Maximum bending length: 2600 mm Machine height: 2750 mm Machine length: 3750 mm Machine width: 1950 mm Machine weight: 6000 kg

pressure: 225 tchamfer lenght: 3050 mmdistance between columns: 2550 mmcolumn arm: 300 mmajustment speed: 110 mm/secwork speed: 9.0 mm/secreturn speed: 130 mm/secwork stroke: 240 mmdayligth: 320 - 560 mmtable height: 1000 mmtable width: 200 mmoil volume: 350 ltr.operating pressure: max. 296 barair pressure: 4.5 - 6.0 barvoltage: 400 Volttotal power requirement: 18.5 kWweight: 14900 kgrange L-W-H: 5180 x 2400 x 3100 mm- in checked condition - machine video -https://www.youtube.com/watch?v=ebbbzSYMxKwFurnishing:- electro-hydraulic CNC die bending/press brake- CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library- CNC-controlled back gauge adjustment (X-axis) Stop range X axis of bending line ..  ...

Key data: 250 t, 4100 mm

Bystronic Xpert 250x4100 - CNC press brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2 and 3D graphics control, ergonomic operating terminal with 15-inch colour monitor - Laser safety device AKAS, manually height-adjustable - Hydraulic crowning - Air bending - Radius bending - without tools - incl. operating instructions - Year of construction 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installation height (clear height between lower and upper beam): 550 mm - Distance between side stands: 3750 mm - Projection: 400 mm - Stop range: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - Travel R-axis: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-operation: 1 - 10 mm/s - Y-operation for robot operation: 1 - 12 m ...

pressure: 85.0 tchamfer lenght: 2050 mmdistance between columns: 1750 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/secback stop - adjustable: max. 600 mmtable width: 120 mmwork height max.: 1050 mmNumber of working hours: 28.500 hoil volume: 200 loperating pressure: 340 bartotal power requirement: 14.0 kVAweight of the machine ca.: 9050 kgrange L-W-H: 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition () with only approx. 28.500 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=ZuwyPKJSYLwEquipment:- CNC electro-hydraulic press brake- including DELEM CNC control swiveling control panel at the front left- CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning- CNC electro-motorized back stop (X axis)- CNC e ...

Key data: 100 t, 2550 mm

The dimensions of the machine are LxWxH 2000mm x 3400mm x 2850mm. The weight is 7400kg. The machine is in a little-used condition.

Key data: 120 t, 3110 mm

Inv. Num. : 9174 Type: TruBend 3120 Producer: Trumpf Created: 2007 Parameters: Compressive force: 120 t Maximum bending length: 3110 mm Distance between frame walls: 2690 mm Machine height: 2330 mm Machine length: 3600 mm Machine width: 1750 mm Machine weight: 8300 kg

Key data: 250 t, 4000 mm

Inv. Num. : 9155 Type: HOL-250/4000 Producer: TOMÁŠEK Created: 2015 Parameters: Compressive force: 250 t Maximum bending length: 4000 mm Distance between frame walls: 3420 mm Maximum stroke: 250 mm Machine height: 2950 mm Machine length: 4040 mm Machine width: 1850 mm Machine weight: 18650 kg Equipment: 1 upper and 2 lower tools The machine has been completely overhauled: New hydraulics New Mitsubishi control unit Controlled bending

Key data: 100 t, 3000 mm

8 Axis machine with tooling

EHT VarioPress 175-35 CNC press brake was built in 2004 in Germany by EHT Werkzeugmaschinen GmbH (now TRUMPF). Currently, the machine is installed 50 cm below floor level, and the new installation requires either a recessed area to be prepared in the floor beneath it or a platform to be built for the operator. The machine is designed for precision machining of workpieces with a maximum length of 3550 mm. The machining process is performed with a high press force of 175 tonnes, which, combined with an extremely stable design, guarantees excellent bending results, even during the most intensive challenges. All this is complemented by the advanced CYBELEC control system, which significantly facilitates the daily operation of the machine. The EHT VarioPress press brake weighs 14900 kg. Technical specifications of the EHT VarioPress 175-35 press brake - CNC controller: CYBELEC DNC 1200 ...

Key data: 5 t, 350 mm, 310 mm

Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!

Key data: 175 t, 4050 mm, 3600 mm

Capacity: 4050 mm x 175 Ton. Distance between frames: 3600 mm. Stroke: 265 mm. Control: DURMA DT15 (3D Touch Screen). Dimensions: 5200 x 1900 mm. Height: 2930 mm. Weight: 12,750 Kg.

DARLEY EHP-L 110 31/25 CNC hydraulic press brake was built in 2000 in the Netherlands by DARLEY B.V. The machine is in very good technical condition and has been regularly maintained throughout its service life. In December 2023, all cylinder seals and oil with filters were replaced by an authorised service. In February 2024, on the other hand a full service of the WILA top tool clamping system was performed. The DARLEY EHP-L 110 31/25 is used for precision machining of workpieces with a maximum length of 3100 mm. The high press force of 110 tonnes, combined with an extremely stable design, guarantees the best bending results during even the most intensive challenges. The deflection arrow compensation function additionally ensures the desired angle along the entire length of the bent workpiece. The offer also includes an extensive equipment, consisting of, among others, DELEM’s adva ...

IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...

Key data: 250 t, 4100 mm

6 Axis Byvision / Laser Guards

Key data: 28 t, 1000 mm

Hydr. CNC Press Brake BOSCHERT Type Profi 28 CNC with various bending tools Weight approx. 3000 kg

Compressive force: 60 t Large working width: 2550 mm Clear stand width: 2550 mm for sheet metal (at full working width) up to: Column projection: 250 mm Bending speed: 75 mm/s Return stroke speed: 95 mm/s Back gauge adjustment: 500 mm Hydraulic drive: 380 V, 4 kW Space requirement: 2920 x 1350 x 2250 mm Weight: 4.7 t Control CYBELEC