Type of machinery
(Quantity: > 9)
Manufacturer:
(Category: 2500)
A water mixing and dosing device from the Scheurer company from 2022 will be offered. The device is used, but in very good condition. Technical data: Manufacturer: Johannes Scheurer GmbH Description: Water mixing and dosing device Series/ Model: CENTRALINA/ DOSAMIXA Year of Make: 2022 Volts: 230 Frequency: 50 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, ...
On offer is a water treatment plant from WABS GmbH from 2021, used in very good condition. Technical data: Manufacturer: WABS GmbH Description: Water treatment plant Model No.: UO-D 1200 Year of Make: 2021 Volts: 400 Frequency: 50 KW: 2.2 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer
Laser Welding Machine – IPG Photonics GENESIS on a marble measuring base Cell Model: SYSLC0000058U Serial Number: PD206000 Power supply: 380-415 VAC Phases: 3P+N+PE Frequency: 50/60Hz Full Load Current: 25 FLA Overcurrent protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Electrical diagram: DOCCHSDMPSXX0225 Production Date: September 2022 2. Laser Source Model: YLR-1500-WC Serial Number: PLMP32200563 Power supply: 200-240 VAC, 1 phase, 50/60 Hz Rated Power: 4500VA Production date: March 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Production date: February 2022 Power supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent protection: 30 A / Type 1 Short-circuit current: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Electrical Diagram: P35-001221 Cooling capacity: 5.5/5.9 kW ...
Type: PX 30530 Serial Number: 12932 Year: 2021 Bending Length: 3050mm Pressing Force: 320 Tons Maximum pressure: 280 bar Motor power: 18.5KW Oil tank capacity: 400 l Weight: 14,700 kg
Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of manufacture: 2016 Serial Number: HFE-M2-220.4 LK101025 Number of axles: 7 (8 AXESL configuration) Pressing force: 2.200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending Angle Measurement: Digital Angle Sensor Stroke: "Long Stroke" (extended) Connection power: 20 kW Hours worked: 10,238 h Dimensions and weight: Weight: 17.970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: 1 Tool Rack (VA) 2 tables with equipment
Bending length: 4100 mm Pressing force: 240 tons Equipped with a set of large number of bending tools Manufacturer: Baykal Model: APHS 41240 Power supply: 3-phase Year: 2021 Serial Number: 28635
ON 17.12.25, A FULL AUDIT OF THE MACHINE WAS CARRIED OUT BY THE MANUFACTURER'S SERVICE Report available WORKING HOURS: 80H (START-UP ONLY) PRICE OF A NEW MACHINE: 7,500,000 EURO • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 •Year of manufacture: 2020/ first commissioning year 2021 • Last operation: 2022 Specifications • Working width: 1600 mm • Suitable material: Polypropylene (PP), MFI 230 /2.16 > 400 g/10 min • Capacity: Up to 65 kg/h per meter of width • Product weight: 10-80 g/m² • Production speed: 5-80m/min • Nozzle head: MB 1600, 50 h/inch • Extruder: RT-1101-1-100, L/D 30 • Rotary beam heating power: 65-172 kW • Winding station: contact winding machine with automatic coil change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tens ...
The line is from 2010. Modernization done in 2020. SPECIFICATIONS OF THE ZEMAN CZS LINE ZEMAN's flagship product, the fully automated "PURLIN" line, is used for the production of open cold-formed sections such as C, Z and SIGMA, with different widths and shapes, thanks to the fully automatic adjustment of the profiling rollers. Coils up to 750 wide can be used as raw material mm and sheet thickness 1.25 mm – 3 mm in grade S-390 and lower. The machine is adapted to production of elements up to 15 m in length. Width adjustment of specially hardened profiling rollers It is done steplessly, using only dedicated software. Fully integrated the "flying punching" device makes all kinds of mounting holes, and the whole process is continuous, which means that the material does not stop to perform individual operations such as punching holes or cross-cutting. To main ...
10 € 
