used Evaporators for sale

USED HASTELLOY 3000 LITRES EMB-300 BACHILLER EVAPORATOR REF.: C3045 MANOFACTURED BY: BACHILLER MODEL: EMB - 300 MATERIAL: HASTELLOY VOLUME: 3000 LITRES VESSEL PRESSURE: -1 / 6 bar / 150 ºC JACKET PRESSURE: 6 bar / 150 Cº. MOTOR REDUCER: 45 KW / 34,3 rpm MAN HOLE ELECTRICAL PANEL INTERNAL DIAMETER: 1400 mm WITH DOCUMENTATION

Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, radiator, thermostat.

Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.

Used 3-stage evaporation station made by GEA Wiegand, capacity: 6000 liters / h, New: 1996

Manufacturer: GEA Wiegand Type: 5-stage evaporator with 2-stage high concentrator Year of Make: 1979 Inlet capacity: 40,000 l/h at 6% dry matter Output (whey): ~4100 kg/h at 58% dry matter Condition: passable MORE INFORMATION AND PICTURES ON REQUEST

Offered here is a vacuum evaporator for wastewater from Korrotherm, model K750. Suitable for chloride-containing and aggressive wastewater Completely technically overhauled and not put into operation since then - like new The Korrodest evaporator system provides a fully automatic low-temperature evaporator system, which is largely autonomous, i.e. without permanent monitoring. by operating personnel. The plant is designed for the processing of diluted, even chloride- and sulphur-containing rinsing water from surface technology. The incurred Rinsing water is thermal, in a vacuum of about 50 mBar, corresponding to about +35°C evaporated and separated into two components. On the one hand, in the distillate, which can be produced up to 98% of the volume flow rate, and on the other hand into the concentrate, which can be concentrated to a density of approximately 1.3 – 1.35 ...

USED MOINPSA STAINLESS STEEL 75 LITRES LEVEL CONTROL REFLUX COLUMN REF.: C9224 General characteristics: Manufactured by MOINPSA Material Stainless steel Year built 2011 Weight 98 kg

Used evaporating machine for milk and caramel masses by Spomasz Pleszew type DUO CAA-9. After a complete overhaul in 2018, it meets all the parameters as DUO CAA-18. Technical data: - working capacity of one boiler: 50 dm3, V = 0.050m3 - total capacity of one boiler: 70 dm3, V = 0.070m3 - heated steam at a pressure of: 8 Bar - steam capacity: 274 kg / h - power demand: 4.1 kW - upper agitator: 74 rpm - efficiency of the milk mass: 220 kg / h, water caramel: 180 kg / h - a used motor-reducer from the Italian company Bonfigioli - inner coat made of acid resistant steel - external coat made of stainless steel - insulation shell made of acid-proof steel, tightly welded

Used evaporator made by Spomasz Pleszew type DUO CAA-9a.

SECOND-HAND STAINLESS STEEL STEAM BOYLER MM. 1400X600

Used 2-stage evaporation station UNIPEKTIN. New 1997. 1-stage aroma trap, 2-stage concentration. For apple juice (cloudy / filtered): Input quantity: 4212 kg / h / 2840 kg / h Input dry pulp: 12 / 17.8% Temp. entrance: 15/45 degrees C. Water evaporation: 3500 kg / h Output quantity: 2,840 / 712 kg / h Temp. output: 50/55/25 degrees C. Initial dry mass: 17.8 / 71% Aroma (15x): 26.8 l / h Temp. aroma: 7 degrees C. Steam consumption: 1450 kg / h Fresh water consumption: 5 m3 / hour

High-quality components of an originally planned bioethanol plant are being sold. All parts are stored in a dry place, some as good as new, some brewed. Key components include: 1. Downstream evaporator • Manufacturer: Vaprotec • Technical data: Heat exchange area: approx. 300m², all apparatus and pipelines made of CrNi steel, material 1.4301 or equivalent or higher quality, •Planning: o Inlet: - Quantity: 7.695kg/h - Conc.: 5.44 wt. %TS - Temp.:80°C o Procedure: - Quantity: 1,240kg/h - Conc.: 35% wt. %TS - Temp.: 65°C - Viscosity: max. 200 cP o Evaporation capacity: 6,725kg/h • Year of construction: 2007 • Condition: Unused 2. 2x Plate Heat Exchanger • Manufacturer: Alfa Laval Lund AB • Model: MX25 MFMS •Specifications: o Pressure range: 0/10bar o Temp range: 0/110°C o 50m² heat exchange area • Year of construction: 2007 • Condition ...