We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 303)
used
! reserved ! Two-station machine for items up to 5 litres with single head. Currently equipped with 4-fold head CoEx: outer layer PE, inner layer PP. Head type: 4 BKZ 40-85 CoEx. Clamping force 80 kN. Mould dimensions: 400 x 340 x 2x130 mm (LxWxD) The machine can be operated with monolayer if required. The condition is very good, comes from a company where medical products are manufactured. It is immediately available
used
Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg.
used
1 x 2 BKSV 30/50 mm stitch 1 x 2 BKSV 40/75 mm stitch Both heads have been professionally cleaned and are complete with valve and encoder
used
A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.
used
year of construction 2002 - completely refurbished in 2021 Extruder 45 mm, 22 D Control Beckhoff new pinola head new wall thickness control new hybrid pump Denison were installed. The machine was running 50 h since the refurbishing, and is as new. Further informations on request!
used
Preheater VN 1000, year 2008 Automatic continuously operating with the size of the foaming vessel 975x3000 mm, Stirrer drive power 15 kW Shift of the discharge bar in 3 positions from 1500 mm to 2700 mm on: - made of stainless steel - preliminary bunker for raw materials 250 l, - dosing screw adjustable - foaming vessel with heat insulation layer to reduce condensation - heated bottom of the chamber with on / off. To shorten condensation - mixer with stainless steel breakers, chrome - removable, fixed breaker, - precise dosing of the chamber with an adjustable auger and dosing funnel, - safety device when disconnected electric current - detached electronic control unit, - bimetal thermometer inside the blowing agent. The performance of the blowing agent depends on the quality of the feedstock, with a European material standard: - at a density o ...
used
Year of construction: 2013 Operating hours: 41238 h Tool open max.: 1450 mm / with adapter plate: 1230 mm Mould closed min.: 830mm / with adapter plate: 610 mm Depth of mould mounting platen: 900 mm / with adapter plate: 700 mm Mould depth max.: .. / with adapter plate 500 mm Height of mould mounting platen: 100 mm / with adapter plate 1230 mm Shot weight max.: 1.5 kg Clamping force: 20 to. Connected load: 155 KW Machine is in good working condition!
used
Description: engine power: 80 kW heating power: 49 kW max. hydraulic pressure: 250 bar max air pressure: 10 bar working pressure: 330 bar mould clamping: ,450 x 850mm  , general overhaul in 2008  , detailed dimensions in attached PDF document 2 trucks required for transport Approx. Onsite Dimension. (l x w x h): 5,500 x 1,700 x 3,400 mm, weight approx.: 19,900 kg
used
Year: 1989 Machine has been completely refurbished Since the refurbishing the machine has 21993 operating hours Extruder: 60 mm Blow head 3.5 liters for technical parts Control: Siemens S7/1500 100 point controller (manufacturer: Beckhoff) Hydraulic unit Hydraulic seals, hoses, pneumatic system, control cabinet, electrical wiring new
used
The blow moulding machine ptb120d used for producing toys, drums, jerrycans, kettles, water tanks, etc, is single station with single die head, which is specially designed for 60l as maximum volume, suitable for hdpe, pe, pp, pvc, petg and other materials for blow moulding. Specifications: Max container capacity: 60 L Number of die heads: 1 Machine dimension (LWH): 865.0 meters Total weight: Ton 35 CLAMPING UNIT Clamping force: 600 KN Platen opening stroke: 880-1780 mm Platen size: 9501000 mm Max mould size: (WH) 9501600 mm Mould thickness: 900-1100 mm POWER Total power: 200 KW Fan power for screw : 0.185 KW Air pressure: 1.0 Mpa Air consumption: 1.2 M3/min Average energy consumption: 120 KW EXTRUDER UNIT Screw diameter: 120 mm Screw L/D ratio: 30:1 L/D Plasticizing capacity: 250 Kg/hour Number of heating: 5 Zone Extruder heating power: 32 ...
used
Year of construction: 1991 with double head 70 mm stitch Clamping force: 18 kN Machine is in good condition, and has few operating hours
used
SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.) Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together). Manufacturer: GABLER Thermoform GmbH & Co., Germany. Date of acceptance to accounting: 04/30/2014. Main technical characteristics: Area of forming surface, mm Maximum - 450x220 Minimum - 430x180 Maximum width of the tape, mm 480 Maximum tape thickness, mm 2 Maximum depth of molding, mm 125 Maximum noise level, dB Not more than 80 Tact at idle, tact / min 44 Mechanical performance, cycles / min 21-25 Voltage 230 / 400V, 50Hz Total power consumption, kW 64.15 Operating air pressure, bar 8 Dimensions (l ...
used
Year of construction 1982 for bottles up to 1.5 litres Cylinder has a 50 mm screw, The machine will be sold without blow head Good Condition, still under power!
used
We are selling blow molding machine Voith fisher maximum capacitity 100 Liter. We put on the machine new extruder 80mm with new gearbox, heaters and motor 37kw,also new accumulation head is instaled capacity 5 liter. Machine have new pneumatic, new electric cabinet with plc and main control unit with 15 inch touch panel. Also machine have new plc with 7 inch touch panel for wall thickness control. Extruder unit: NEW ONE -Screw diameter 80mm -Screw L\D ration 24 -Melting capacity for HDPE 120-140 kg\h -Number of heating zones 4 -Screw heating power 15.6 kw (Original have 28kw) -Extruder motor 37 kw (Original have 60kw) Die head : NEW ONE -Number of heatug zones 5 -Heating power 22.8 kw -Max die pin 250mm but we make addition part to have 320mm die head -Accumulator capacity 5L -Accumulator weight 3.75 kg With new extruder and die head we reduce total installed power f ...
used
used double head, with WDS adjustment, in good condition. 125 mm center to center, die dia up to 55 mm.
used
WIB 65 JINGYE injection-blowing machine - Year 2013 launched 2014 It was used for the production of 11 liter containers from PC Suitable for HDPE. Screw diameter [mm] = 65 propeller speed [rpm] = 0 - 180 injection capacity [g] = 750 injection pressure [KN] = 1300 clamping force when blowing [KN] = 200 engine power [KW] = 37 heater power [KW] = 15 purge pressure [MPa] = 1.0 - 2.0 cooling water [bar] = 1 - 3 machine dimensions [mm] = 5200 x 1900 x 3600 machine weight [kg] = 8000 MAXIMUM PARTICULAR DIMENSIONS: Height [mm] = 300 Diameter [mm] = 300 connected machine ready to be presented during operation
used
Extrusion Blow Molding Machine For Sale Brand: Aoki Model No.: 500 ll 75 Year: 1993 Characteristics: 1 x 6-Cavity Detergency Bottle Mold Piovan Dryer & Hopper Dye Mixer For more details or to make an enquiry, please contact us.
used
LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L Produced ( 0,33 L 0,5 L 1,0 L 1,5 L 2,0 L) AUXILARY EQUIPM
used
Stretch cart: 1600 mm and width: 200 mm, Bausano brand.
used
Urola USP-2FL Blowmoulding machine 2004 Urola double mold bottle blower of 5 lt 3,300 bottles / hour, molds and tipper included, the machine is brand new
used
SIDEL type SBO 6 Serie 2 Year: 1999 Capacity: 7.800 bph Number of moulds:: 6 Equipped : quick change for shell molds Oven type : Sidel caterpillar oven Neck personalization: still mineral water 30/25 Working hours: low working hours Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel electrical cabinet & PCC including HP compressor & chiller also Sidel air conveying system Equipment in good condition Available immediately
used
We sell a factory for the production of PET containers. Brand: TEREKAS (Litva) Model: TFA-3 Release year: 2006 Productivity: 3100 bph Power: 50 kW Rated Power: 30 kW Kit: blow molding machine TFA-3 Airpol compressor station high pressure compressor booster dehumidifier chiller 2nd high pressure tanks preform loading manipulator preform conveyor preform hopper preform loader molds (7 sets)
used
STM PET blowing machine for 5 to 7 liters bottles Manufacturing year 2015 low working hours Currently blowing 6 liters bottles on mould 3 cavities at 30 bar. Capacity 3.000 bph Machine equipped with: preforms hopper and feeding system loading and process of the preforms inside oven with internal grip Preform heating by IR oven with 6 heaters each heating module with 8 lamps Preform grip and transfer to the mould Stretching & blowing station Exit device of the processed bottle EPI Eco power energy saving system Chiller and HP compressor included & also full filling & downstream line Unique opportunity Available immediately
used
Blow Molding BM 5000D full electric (2005) Machine mass: 22.800 kg Year of mnufacture: 2005 Ed.05 Max width: 4780 mm Max width with open barriers: 6820 mm Control cabinet height: 1400 mm Back width: 2270 mm Max height: 3800 mm Max length: 5770 mm Horizontal stroke: 500 mm Dry cycle time: 3,2 s Max cycles number: 13 per min Air pressure: 6-10 bar Total installed power: 44 Kw Cooling water pressure: 2,5kg/cm2 Working prssure level in the working environment: 88,3 dB(A) Total weight without extruder: 11.200 kg Extruder technical data: -Screw diameter : 90 mm -Screw motor power: 53 Kw -Rotation speed: 80 rpm -Heating power+maximum head: 24 Kw The machine is out of use but removed from production for 2 years , and can be connected electrically for inspection.
used
SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately
used
PET preform blower up to 6 liters 1 cavity Maximum bottle diameter 170 mm Maximum bottle height 345 mm Production 800 BPH Installed power 33 Kw
used
For articles up to 120 ltr. Extruder 120/24D, output up to 500 kg/h. Battery head 12 ltr, nozzle range 160 - 330 mm. New control system installed by Beckhoff in 2020. Clamping force 620 kN. Mould length 1,300 mm, width 900 mm, depth 2x250 mm. Opening up to 1,400 mm. With slug tongs, trimming station, handling robot
used
Soffiatrice Kautex KBSH 2-60 Year 2004 Extruder weight 2500 kg
used
max container size 5,000 ml. Machine has only run for 168 hours - as good as new
used
The machine of the Italian company COMEC model CS 2000 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed