subcategories
(3rd category level)
Manufacturer:
(Category: 103)
DECKEL FP4M Universal Tool Milling Machine Serial Number: 2203-1545 Control: HEIDENHAIN POSITIP 855 Travels: X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Rapid traverse: 1300 mm/min. Feed: 8 – 630 mm/min Table dimensions: approx. 800 x 460 mm Max. table load: approx. 600 kg Spindle speed range: 50 - 2500 rpm Tool holder: SK40 Without machine vise.
Machine number: 2820-0492Operating voltage: 400 VFrequency: 50/60 HzRated current: 19 AControl: DECKEL CONTUR 3Travel X-axis: 400 mmTravel Y-axis: 400 mmTravel Z-axis: 400 mmFeed: 2 - 3600 mm/minRapid traverse: up to 4 m/minTool holder: SK 40Table dimensions: 700 x 460 mmwith 7 groovesincl. vice, jaw width: 110 mmReference: Hüpometall - Lot 22
MIKRON WF 2 Universal Tool Milling Machine HEIDENHAIN Digital Display Travels: X-axis: 420 mm Y-axis: 250 mm Z-axis: 340 mm Rapid traverse: 1400 mm/min. Feed: 8 – 400 mm/min Table dimensions: approx. 700 x 250 mm Spindle speed range: 50 - 2240 rpm Tool holder: ISO40 With machine vice, jaw width: approx. 110 mm
CNC UNIVERSAL MILLING MACHINE Inv. No. 13.165J1 Make MIKRON Model WF 31DCM Machine No. Control HEIDENHAIN TNC 155 Table dimensions 460 x 800 mm Longitudinal travel (X) 560 mm Cross travel(Y) 500 mm Vertical travel (Z) 400 mm R.P.M. 40 – 4000 Rapid traverse X-Y 4000 mm/min Rapid traverse Z 3500 mm/min Quill travel 90 mm kW total power 10 kW drive power 3.3 / 4 Machine weight 2540 kg
x-travel:14000 mmy-travel:3100 mmz-travel:1.200 mm (220 - 1.420) mmdistance between columns:4.417 mmtable-size:14.000 x 2.500 mmworkpiece weight:15.000 kg/mdrive capacity - spindle motor:25 kWspindle cone:63 HSKspindle turning speed range:18000 rpmmilling feeds:30000 mm/mindimensions of the machine ca.:15.000 x 8.418 x 6.033 mmweight of the machine ca.:135 tCNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach
x-travel:2000 mmy-travel:800 mmz-travel:800 mmtable-size:2.000 x 700 mmworkpiece weight:3500 kgdrive capacity - spindle motor:17 kWspindle cone:50 ISOspindle turning speed range:3000 U/mindimensions of the machine ca.:5265 x 3250 x 2730 mweight of the machine ca.:9 tCNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines.- Completely repair of the head, replacing bearings, shafts and engaging gears.- Completely replacement of all the bearings of the machine.- Replacing the joining screws of the bodies.- Completely repair of spindles.- Adjustment and repair of axis.- Grinding and adjusting all guides, because of deterioration.- Grinding and adjusting of the guide ways of the ram.- Repairing o ...
x-travel:1000 mmy-travel:1150 mmz-travel:700 mmtable-size:900 mmtable load:1500 kgspindle speeds:10.000 1/minspindle drive:Motorspindel von Cytec CS34-180-A 34&42KW/160&200 Nmspindle taper:A100 HSKT-slots:18mm/7/100 mmmilling feed range:20.000 mm/minrapid traverse feeds:X/Y/Z: 24 m/mindiameter of tools max.:150 mmworkpiece length:300 mmweight of tools max.:20 kgweight of the machine ca.:15 tdimensions of the machine ca.:s. Katalog mCNC controller:Heidenhain iTNC-640 HSCI-Steuerung cnc rotary table:von Cytec; mit Ø900mm; 800 1/min Drehmomenttisch (AS3347) + HSK-T63/100 Spindel & ATC + TNC-640 Fräsdrehzahlregelung B-axis:Fräskopf, 0-180° c-axis:0,001° automatic tool changer:HSK-A/T100; 60 fachScales:in X/Y/Z von Heidenhain mit Druckluft inner coolant:20
Robust universal conventional milling machine equipped with a vertical swivel head and a horizontal spindle, suitable for milling, drilling, grooving and surfacing operations. Heavy construction machine made of cast iron, offering high rigidity and excellent precision for mechanical machining work. The T-slot table has mechanical advances on the axes and allows the machining of large workpieces. The vertical head is steerable and the machine is equipped with a gearbox with several rotation ranges. Feature
Digital display for X, Y and Z,
Machine number: 2300-0053Speed: 40 – 2,000 rpmTable dimensions: 1,000 x 520 mmNumber of table grooves: 6Travels: X-axis: approx. 500 mm, Y-axis: approx. 400 mm, Z-axis: approx. 300 mmwith swivel table, three-axis digital display (Heidenhain), new bellows, new cranksReference: Showroom/Oberthür
Professional Contimac drill-milling machine with cross table, suitable for various metalworking operations such as drilling, milling, slot milling and face milling. The machine is equipped with a gear-driven milling head and an adjustable work table for precise machining. The machine is in good condition. Features: Brand: Contimac Type: Drill-milling machine / column milling machine Cross table available Gear-driven milling head Adjustable table Suitable for drilling and milling work Pedestal mounted Ideal machine for workshops, maintenance services and general metalworking. Condition and operation in accordance with on-site findings.
CNC MILLING MACHINE Inv. No. 12.565J Make TOS Model FGS 40/50 CNC Mach. No. 43400083 Control Heidenhain TNC 355 Table 400 x 1,250 mm Longitudinal Travel (X) 850 mm Cross Travel (Y) 500 mm Vertical Travel (Z) 500 mm Taper ISO 50 R.P.M. 35 – 1.800 kW 7,5 Volts 380 Cycles 50
CNC TURNING AND MILLING CENTER SPINNER TTS 65 DUPLEX TECHNICAL DATA: Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A TRAVELS: X1 / X2 axis: 180 mm each Y1 axle: ±45 mm Z1 axle: 704 mm Z2 axis: 620 mm E2 axle: 720 mm Rapid traverse X/Y/Z axis: 30 m/min SPINDLE 1: Max. speed: 5,000 rpm Spindle Nose: A6k Spindle bore: 65 mm Bore in clamping cylinder: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2: Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Bore in the clamping cylinder: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Drive power: 16.5 kW TOOL CARRIERS: 1x 10-fold tool turret 1x 12-cavity tool turret All stations driven (12 stations each) Max. speed driven tools: 8,000 rpm ACCESSORIES: Chip conveyors from KNOLL Tool holders (as seen in the photos, are included) See also video: https://youtu.be/cL16zplqYFQ Reference: Proj ...
Manufacturer: LAGUNYear: 1991Type: CNC universal milling machineNumerical control: Heidenhain TNC 355Axes: 3 axes (X, Y, Z)Strokes: X 1100 mm / Y 600 mm / Z 600 mmTable: 1200 x 550 mmSpindle: 50 to 3000 rpm – motor power 20 kWEquipment: HURON universal head type, coolant systemRemarks: Robust CNC universal milling machine for heavy and versatile milling.
Universal Milling Machine - Digital display - Chip protection - Coolant system - Machine light - Chip tray x-travel 560 mm y-travel 300 mm z-travel 420 mm Table size 1055 x 240 mm Spindle holder ISO Sk 40 Spindle speeds 40 - 1550 rpm Total power requirement 5.5 kW Machine weight approx. 1.3 t Dimensions L x W x H 1.6 x 1.5 x 1.85 m
WITHOUT TOOLS 24 Recording Carousel Important: Charging by the seller is possible for €450 If this is not used, the buyer must organize the loading and the necessary resources himself.
Universal Milling Machine - 3-axis digital display - Central lubrication - Coolant system - Machine light - Machine feet - Guard protection - Emergency stop facility - Mobile workbench incl. tools x-travel 1550 mm y-travel 400 mm z-travel 500 mm Table size 1850 x 350 mm Spindle mount ISO Sk 50 Spindle speeds 40 - 1800 rpm Quill stroke mm Total power requirement 7.5 KW Machine weight approx. 2.8 t Dimensions L x W x H 2.4 x 2.2 x 2.1 m
Max. deflection: 575 mm diameter Standard chuck size: 305 mm Distance between tips: 1527 mm Headstock center height: 310 mm Max. load capacity: Feed work: 250 kgf Top work: 1000 kgf Control: MAZATROL T PLUS Max. speed of KITAGAWA chuck: 3000 rpm With technical documentation as shown in the pictures
Serial number: 07400003691operating hours read: 88,040Spindle hours read: 43,558Spindle speed range: 3200/5000 rpmRotation diameter: 270 mmTurning diameter: 120 mmSpindle distance: 900 mmTravel X1: 290 mm TravelZ1: 650 mmTravel X2: 180 mmTravel Z2: 650 mmTravel Y1: +- 40 mmTravel Z3: 670 mm TravelX3: 175 mmMax. rod diameter: 100/104 mmSpindle bore diameter: 118 mmRapid traverse speed X- and Z-axis: 30 m/minRapid traverse speed Y-axis: 15 m/minNumber of driven tools per tool carrier: 12Control: SIEMENS SINUMERIK 840 D POWERLINEincl. chip conveyorwith 2 tool turrets - each with 12 tool positionsmain and counter spindles, as well as foot switchesAttention, the machine has the following defects:-the B-axis is defective (sits on turret 1)-the guides and drives are worn according to their age-X2 axle (guide rails) runs a bit crookedin the range of 0.03 mm (would have to be remeasured), sporad ...
Equipment: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with quill - Documentation x-travel 410 mm y-travel 310 mm z-travel 400 mm Table size 700 x 280 mm Control Heidenhain TNC 145 Mounting SK40 Speed range 40- 2,000 rpm Rapid traverse speed 1.5 m/min Feed speed 1500 mm/min Drive power 2.2 kW Quill stroke 63 mm Weight 1.3 t Total power requirement 2.2 kW Machine weight approx. 1.5 t Dimensions L x W x H 1.4 x 2.1 x 2.0 m
Technical data Manufacturer: LID Model: FP3NC Type: FP3NC Serial Number: 2803-2395 Control: DECKEL Dialog 3 Machine type: CNC Universal Tool Milling Machine X-travel: approx. 400 mm (Source: online) Y-travel: approx. 400 mm (Source: online) Z-travel: approx. 400 mm (Source: online) Table size: approx. 700 x 460 mm (Source: online) Tool holder: SK40 (Source: online) Quill stroke: approx. 80 mm (Source: online) Spindle speed: approx. 31.5 - 6300 rpm (Source: online) Drive power: approx. 14.5 kW (Source: online) Machine weight: approx. 1,800 - 2,000 kg (Source: online) Configuration DECKEL Dialog 3 Control Vertical milling head Horizontal spindle Machine vise Coolant Setup Tool holder SK40 WITHOUT! ATTACHED MACHINE VICE Note: No original documentation available. The technical data was researched and adopted on the basis of several matching Internet sources.
UNIVERSAL MILLING MACHINE Inv. No. 13.147J1 Make TOS Model FA3AH Mach. No. 1854 Table 300 x 1,375 mm Longitudinal Travel (X) 890 mm Cross Travel (Y) 275 mm Vertical Travel (Z) 400 mm Taper ISO 40 R.P.M. 45 – 2.000 KW 4 Volts 400 Cycles 50 Including Coolant attachment Emergency stop
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Cross600 mmLongitudinal560 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Tool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTable surface 400 x 400 mmMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingSpindle taper CAT 40Speed range - 18000 rpmTorque (40% DC) 110 NmTorque (100% DC) 84 NmDrive power (40% D ...
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Tool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTable surface 400 x 400 mmMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingSpindle taper CAT 40Speed range - 18000 rpmTorque (40% DC) 110 NmTorque (100% DC) 84 NmDrive power (40% D ...
Control Heidenhain ... TNC 530 Clamping table surface... 3000x1250mm Axis X ... 3000mm Axis Y ... 1000mm Axis Z ... 1400mm Spindle speed... 10-5000 rpm Max. table load... 7000kg Spindle holder ... ISO 50. Number of positions in the tool changer ... 8 Machine weight ... 23000kg Spindle Hunter 30 000rpm Rotary table ISN 1000 CNC V
Control Siemens ... Sinumerik 840D Sl Clamping table surface ... Diameter 1200mm Axis X ... 2200mm Stand passage... 2125mm Axis Y ... 2425mm Axis Z ... 1000mm Max.table load ... 6000kg Rapid traverse ... X,Y,Z 15 000m/min Total power requirement ... 110kVA Number of positions in the tool changer ... 100 Max. tool weight ... 15kg IKZ ... 60bar Machine weight ... 50000kg Spindle speed 12000 rpm Spindle mount. HSK 100T Workpiece Probe Renishaw OMP 60 Tool Probe Renishaw TS 27R Rinsing gun Handwheel 3x chip conveyor Documentation The machine is in good condition, possible to test under power.
Control Heidenhain ... TNC 430 Clamping table surface... 800 x 400mm Axis X ... 500mm Axis Y ... 400mm Axis Z ... 400mm ISO 40 Spindle speed ... 0-4000 rpm. Max. workpiece weight ... 300kg L x W x H ... 2800x2700x1980mm Machine weight ... 2600kg Main engine power ... 5.5kW The machine is in good condition.
GeneralTurning/milling center with turning length 1100 mm - mounting HSK-A 63 DIN 69893 - B-axis ±120 - Y-axis ±100 mm - 60-fold chain magazine - Absolute, direct path measuring systems in X-, Y- and Z-axis - Hydraulically movable tailstock with foot pedal - Double switch filter - Electric handwheel - DMG MORI IoT connector - Clamping pressure adjustment on the control - 5-axis simultaneous machining; Control: CELOS X with Siemens SINUMERIK ONE Working areaTurning diameter500 mmDistance between spindles1435 mmMax. Turning Length1100 mmMain drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmFloor space/WeightDimensions (L x W x H)5,77 x 2,33 x 2,51 mWeight approx.10000 KgTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-15000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (10 ...
used
GeneralUniversal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal800 mmCross650 mmVertical550 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,56 x 7,98 x 3,05 mWeight approx.12000 KgIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range -20000 rpmSpindle taper SK40 - BIG-PLUSClamping System DIN ISO 7388Dynamic package DMU 80 eVo linearDynamic package for DMU 80 eVo linear linear drive X/Y-axis with ...
