Manufacturer:
(Category: 503)
IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...
fire: Taurus, model: C872HD, Year of manufacture: 2010, box length: 7.0 meters, Box / Bale section: 900 x 600 mm, Pre-compression device: Sheet pre-compressor, Shearing force: 800 tons
fire: SCM Technology, model: CM 1000 Mobile, Year of construction: 2001, Length: 9990 mm, Width: 2550 mm, box: 6600 mm, Engine: Diesel engine, Cutting: 900 x 800 mm, General conditions: working, Cutting force: 1000 tons, Weight of machine: 39 t.
Basic equipment: - Mobile shredder, mounted on a central axle trailer chassis for 80 km/h - Total weight approx. 18,000 kg - Mercedes Benz OM 442 LA, 215 kW (300 hp) - Hydraulic drive - Radio remote control - Registration papers, spare parts list and operating instructions available. Condition of the machine The machine is in a technically and visually good condition and ready for use. Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects
Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers
BANO UNIMAC 180/70CP Mod.S, reinforced structure Hopper: 1.830 x 1.300 mm, Hopper capacity: 2.340 lt. 132 KW a.c. drive Rotor: 1.700 mm wide Rotor diam.: 660 mm. Rpm: 80-140 Outer diameter: 700 mm. Outer length 1800 m. Rotor knives: 60×60 mm. Screen: 30 mm. (or bespoke) Ram stroke on 600 mm. Side ram + upper ram Hydraulic pack Dimensions LxWxH: 2400x3600x2450 Construction year 2005 The machine is offered totally and professionally reconditioned User manual + drawings + CE, installed power - used power in work: about 60-65% : 132 kW, conditions: Reconditioned, availability: 40 days ca from confirmation , type: Single shaft
Vecoplan VAZ 2500 M NF-T, Compact high torque motor with motor pump unit and electric motor, Including:, Generous bolted hopper about 16 m3 capacity, Special system to stop the machine with hard contamination, horizontal hydraulic ram + vertical hydraulic ram (excellent for light voluminous or round shaped scraps), hydraulic power station with 1x15 kw + 1x7,5 kw motors, 250 lt hydraulic oil tank, Max. operating pressure up to 150 bar, Hi Torque drive with silent running sysyem, Rotor Ø 640, Rotor width 2.500 mm., rotor rpm 0-220, n.76 cutting crowns 60x60 x30 mm, n.6 still knives, 5-pieces screen size : 20 mm - different size on request, electro-pneumatic pistons for screen opening, Motor power : choose among 134 kW, 203 kw or 247 kw Hi Torque., 315 kw inverter to cover any drive., 415 A nominal 0-220 rpm 400 V 50 Hz - IP 54, temperature probes on the 2 bearings, constructed in 2006 but ...
ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears
•, • Model: ARJES VZ 850 DK, • Type: Dual-shaft shredder, • Year of manufacture: 2017, • Operating hours: 4,150 h, • Weight: approx. 26,000 kg
Technical data wood and plastic shredder:Manufacturer WEIMA Maschinenbau GmbHType WLK 800Year of construction 2018Operating hours 1,192 hoursDrive power 30 kWSpeed 90 rpmRated current 70 ASlow-blow fuse 80 AHydraulic pressure for horizontal slide 160 bar, load-dependent or pulsed control selectableRotor type profiled V-rotorRotor diameter 260 mmRotor length 800 mmRotor speed 80 - 125 rpmNumber of cutting crowns, concave, 2-row, 42 piecesCutting crown size 40 x 40 mmGrain size 15 - 80 mmFeed opening 800 x 1450 mmCutting chamber dimensions 720 x 700 mmHopper capacity 0.8 m³Machine dimensions 2,590 x 1,745 x 2,180 mm (l x w x h)PLC control Siemens SIMATIC S7-1200Screen basket with 30 mm hole size, can be folded downwardsShredder transport weight 2.8 tonnesMachine equipment:Segmented floor 2-sidedFree-cutting hopperElectromechanical drive with WEIMA WAP gearboxHydromechanical starting clutc ...
Technical data for the document shredding system:Manufacturer HSM GmbH + Co KGGeneral data for the two-stage shredder system:Type Duo Shredder 5750Year of manufacture 2015Operating hours 3,093 hoursThroughput capacity up to 800 kg/hour, depending on materialRated power 30 kWRated current 62 AParticle cutting size 6 x 40 - 53 mmFuse protection 63 A gG/gL/C/KWeight of shredder approx. 2500 kgData on the pre-shredder:Shredder type V 570Working width of the cutting unit 500 mmParticle size 20 x 155 mm (w x l)Nominal power of pre-shredder 2 x 5.5 kWNominal current of pre-shredder 2 x 11.5 AData on the secondary shredder:Shredder type P 500.2Working width of the cutting unit 500 mmParticle size 6 x 40 ? 53 mm (w x l)Nominal power of secondary shredder 9.2 kWNominal current of secondary shredder 18 ASecurity level according to DIN 66399 P-3, O-2, T-3, E-2Baling press data:Type KP 100.1Year of m ...
Technical data cardboard shredder:Manufacturer Presto GmbH & Co. KGType PZAYear of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021Throughput volume 130 m³/hourSpeed 37/9 rpmMotor power 7,5 / 2,2 kWElectrical connection 32 ADimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H)Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h)Machine weight 0,45 tonsUse of the systems:The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds ...
Technical data shredder:Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbHType ZTLL 1400 x 1600Year of construction 2010Operating hours 56,748 hoursInlet cross-section 1400 x 1600 mmMain drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kWRotor flight circle 380 mm Rotor speed approx. 107 rpmNumber of cutting tools 52 knives, 40 x 40 mm, with tool holdersScreen perforation 40 mmWeight approx. 5400 kgScope of delivery:Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery.Remark:The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power.Comments:The documentat ...
• Brand: Bonfiglioli, • Model: Squalo 950T, • Year of construction: 2009, • Operating hours: 2,200 h, • Condition: Used, good working condition, • Cutting force: 950 t, • Pre-compression force: 80 t, • Cutting length: approx. 50 cm, • Hourly output: 10–12 t/h, • Engine: diesel, • Power: 90 kW, • Fuel consumption: 8–10 L/h
Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,
IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...
The BBT 400 Woodzilla is a 360° swivel, compact, Powerful, mobile drum chipper with aggressive feed, built on truck trailer chassis. Technical data Drive: Diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chopping drum: 400 x 500 mm, 4 knives Trunk diameter max.: 32 cm Length of feed table: 1300 mm Outrigger: 4-fold hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chippers and cranes Pendant towing eye: 40 mm Brake: Air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chippers and cranes The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.
WEIMA WLK 2000, 110 kW drive, Infeed 2.000 x 1.890 mm., Rotor length 2.000 mm, Rotor Ø 354 mm, cutting crowns 40 x 40 x 23 mm., screen size 40 mm or bespoke, hydraulic horizontal ram with hydraulic power station, Constructed in 2018, Machine offered checked for good conditions, overall dimensions : L x W x H m. 4,35 x 3,35 x 2,13 about 9 Tons, availability: 2 weeks, working width: 2.000 mm., conditions: reconditioned, type: electric
• Brand: EUREC, • Model: Z85, • Type: Double-shaft crusher on tracks, • Year of construction: 1999, • Availability: immediately, Weight: approx. 32 tonnes, • Shredder mouth width: 2.30 m, • Shredder mouth length: 1.80 m, • Shaft length: 1.85 m, • Hopper length: 5.40 m, • Hopper width: 2.50 m
• Brand: C.M.I, • Model: BF 4000, • Serial No.: 0046, • Year of construction: 2006, • Operating hours: approx. 4,500 h, • Weight: 62 t (without accessories), • No-load shaft speed: 3 rpm
DUAL SHAFT SHREDDER MULTI-PURPOSE for tires, plastics, metal drums, Used machine qith less than 1.000 worked hours, constructed in 2020, overhauled in 2025, This machine can shred 2-3 truck tyres/min, shredding size 1.350 x 900 mm., N.2 counter-rotating shafts, shafts speed approx.10 rpm low torsion, Cutter shaft torque approx. 40,000 Nm, automatic inversion on overload, generous feeding hopper 1.800 x 2.700 mm, Drive power 4 x 22 kW - Total 88 kW, planetary gearboxes, 40 mm thick knives, Weight 9,000 kg, low noise, low dust emission, Control panel Siematic S7 1212C., Users manual, electrical drawings, CE compliance declaration, installed power - used power in work: about 60-65% : 88, availability: 1 month, working width: 1.350 mm, options available: possible fitting with top hydraulic ram - one second hand machine like this one is available now, conditions: new machine, type: dual shaf ...
FORREC HEAVY DUTY DUAL SHAFT SHREDDER, Mod TBH 2000 hydraulic, loading hopper, side ram for bulky, round or voluminous scraps, presently used for Tyres, Cutting chamber dimensions: 1.300 x 1.960 mm, 270 kW installed power, hydraulic power station, shafts length 1.960 mm., sturdy supporting structure, Control panel, machine constructed in 2017, reconditioned, Overall dimensions: LxWxH 4,3 x 2,4 x 4,1 mt., Weight: 14.500 kg, Applications:, - Plastic Wood, - Car / truck tires, - Paper / cardboard, - Electrical cables, - Oil filters, - Refrigerators, - Municipal / industrial waste, Constructors Description : Working without a grid, FOR REC double-shaft shredders can handle high material flows. In fact, the exclusive and innovative design of the cutting chamber allows for quick extraction and replacement of shafts complete with blades, drastically reducing maintenance time and speeding up the ...
height: 3.600 mm, With conveyor belt: 15.200 mm, Engine: Volvo Penta
- Brand: Mayper - Model: MAPC 3280 - Cutting chamber: 830 x 320 mm - Open rotor - Slanted cut - Engine: 40 hp (30 kw) - 3 HP (2.2 kw) vacuum cleaner -Electric motor
VECOPLAN VAZ 1300, multi-purpose single shaft shredder, 45 Kw drive, in its electrical, mechanical and hydraulic parts, Knives : 40 x 40 mm, Rotor lenght : 1.300 mm, horizontal hydraulic ram, hydraulic power station, control panel, constructed in 2007, the machine is offered totally reconditioned, installed power - used power in work: about 60-65% : 45 kW, availability: immediate, working width: 1.300 mm, conditions: reconditioned, type: single shaft, multi-purpose shredder
ELDAN SUPERCHOPPER SC1412 T, Powerful crusher for Tires, Cables, Plastics, Wood, other waste materials, Sturdy supporting structure and frame, vibraring extractor, vibrating extractor, loading hopper, electric cabinet, Goood working conditions, See how it works [HERE](youtu.be/KgxG4KchZkI), working width: 1.400 mm.
VECOPLAN VAZ 145/135, Rotor Width : 1.350 mm, Rotor Ø 370 mm, 30 kw drive, Tilting conveyor : 5,0 mt.long 1.350 mm wide, Hopper size: 1.350 x 1.450 mm, horizontal hydraulic ram, hydraulic power station, screen : Ø 30 mm + spare Ø 20 mm, Chain extraction belt : 5.000 mm 45° angle with magnetic drum, Control panel, In the video control panel + hydrauilcs are kept in s 10container for safety., Total size : L x W x H : 4,1 x 2,2 x 3,7 mt. Dismantled fits in a 40 fcl., availability: immediate, working width: 1.350 mm., conditions: good running conditions, type: multi-purpose single shaft shredder
•, • Type: MEWA UC 201 rotary shear, • Electric drive: 2 × 75 kW, • Total performance: 158 kW, • Rotor length: about 2000 mm, • Knife size: 80 mm, • Weight: approx. 50 t, • Year of construction: 1999, • Rated voltage: 690 V, • Type of current: 3/PE, 50 Hz, • Rated power: 158 kW, • Rated current: 160 A
model: JLSS2000-#19, • Year of manufacture: 2022, • Operating hours: 35 h (demo machine), • Main power: 2 × 90 kW, • Gearbox type: #119 planetary reducer, • Shredding cavity: 960 × 1430 mm, • Rotor speed: 6–8 rpm, • Working capacity: 15–25 t/h
Komplett-Konzept Verwertungs GmbH
