subcategories
(3rd category level)
Manufacturer:
(Category: 703)
Fully reconditioned skid mounted Stephan UMM/SK 130 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling on the jacket including all valves, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 2x mixing blades, maximum working pressure in the bowl -1 / 2 bar (protected with overpressure valve), maximum temperature in the bowl 120 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid for a hopper (hopper itself excluded), mounted on the lid a scraper agitator for the wall, electric driven (1,1 kW - n1: 1.400 rpm - n2: 29 rpm), 3 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl for empyting, hyd ...
Fully reconditioned skidmounted Stephan UMM/SK 80 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling on the jacket including all valves, 3x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 2x cutting blades, maximum working pressure in the bowl -1 / 1,5 bar (protected with overpressure valve), maximum temperature in the bowl 127 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid for a hopper (hopper itself excluded), mounted on the lid a scraper agitator for the wall, electric driven (0,55 kW - n1: 1.435 rpm - n2: 29 rpm), 3 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl for empyting, h ...
Skid mounted aluminium Benhil through with augers with drivework for the augers, small control panel with controls, fench protection above the through with augers for safe working and mobile outfeed Waukesha 034 lobe pump with motor ( ± 5,5 kW, estimated no name tag) and motorcover. Pump displacement per revolution: 0,227 liter. Pump maximum nominal capacity: 5.500 ltr/h. Pump inlet, rectangular, 1,75 x 6,75 / 44,5 mm x 171,5 mm and outlet, round, 2 / 50,4 mm. Pump maximum pressure range: 200 psi / 13,8 bar. Pump max speed: 400 rpm., Type of Machine: Through with augers with butterpump, Motor lobe pump: +/- 5,5 kW - 380 V - 50 Hz, Total dimensions: 120 x 120 x 210 cm, Weight: 200 kg
overhauled, with in-house warranty: Boiler 80 liters Küppersbusch KCN0245/NES080, 400 V, 15.6 kW, 25 A, plug 32 A, automatic cooking, continuous cooking, start time preselection, process time, inlet for hot and cold water, dimensions 80x85x86 cm
Nock Skinner -Type: CB 695 -Power: 1.1 kW -Cutting speed: 29 m/min -External dimensions: 2300 x 950 x 1200 mm -Belt width: 535 mm -Power supply: 400V 50Hz 3N -Weight: 265 kg -Quantity in stock: 1 -Condition: used in good condition, ready to work
The Trepko XPG 40 model is a Forming, Filling and wrapping machine for Aluminium foil or Parchment paper, this can be used to fill various products such as Butter, Margarine, Lard, Etc. The machine was fully refurbished in 2017 and it was never put in production now it’s with us in stock, we have made the full check over and is in perfect working order. The line consists also a Cintex Metal detector out feed conveyor ., Machine: Trepko XPG 40 , Capacity: up to 80 packets/min , Pack size: 100-300 grams, Dimensions: 100mm x 75mm x 35mm (250grams ) , Product: Butter, margarine, etc., Wrap material: Aluminium foil or parchment paper in reels, Product Feed: Hopper with Screws , Photocell: Foil Centering unit , Weight: 2.000 kg (gross), Machine Dimensions: Approx. 200 x 150 x 200 cm (l x w x h), Electricity: 2,2 kW
Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging KUCHLER S.A.M. P2 Specifications: Slicer type: SAM P310 f v Type Foil Dispenser: SAM KP 21 Airless Type Packer: SAM IL - 4 - 220 Airless Type Labeler: Mettler Toledo UC-GTT-M 400 Volt / 50 Hz / 3.79 A Year of Make: 2014 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated New price in this version approx. EUR 55,000 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Bone Band Saw KOLBE K330 S Specifications: Type: Kolbe K 330 S 400 V / 50 Hz / 1.5 kW / 3.4 A Year of Make: 2014 Cutting side passage max.: 280 mm Max. cutting height clearance: 300 mm Table dimensions: L59 x D76 cm Machine dimensions: H180 x W75 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base, height-adjustable Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone flour container is included Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. Sale according to § 25a of the Value Added Tax Act of m ...
Microcutter FD 112 Karl Schnell Stainless steel Dimensions: 1150x1200x1700mm Voltage: 400V / 50Hz / 3N Up to 3500kg/h Electric power: 51kW
We are offering a complete evisceration line M4.0 Pro for 12,000 birds/hour, made by Meyn (Main), manufactured in 2012 and in very good condition, according to a certified Meyn technician. ✅ Includes: Full set of evisceration modules Electrical cabinet with original Meyn setup High-capacity automatic system Components of a nearly latest-generation line Ideal for poultry processors looking to scale up production capacity with reliable, high-end equipment — at a fraction of the investment of new systems. New generation of Evisceration equipment" Live bird weight range : 1400 -3800 gr Maestro 28 units right turn Pan conveyor 6 meter Vent cutting machine 20 units left , M0.4 Pro Opener machine 20 units left, M0.4 Pro Cropper 20 units right, M0.4 Pro Neckskin 20 units right, M0.4 Pro Neck breaker 16 units right, M0.4 Pro FIM 20 units left, M0.4 Pro Drive 4 total 1. ...
The BIRO F2000N Food / Patty Forming Machines are designed for production of a wide variety of meat and food products, with maximum production output capability from approximately 2000 to 4000 formed products per hour. A large number of drum mold die shapes are available. They vary from the standard round shapes of different diameters to special shapes such as square, oval, rectangle, fish, cutlet, heart, chicken leg, chicken nuggets, rabbit, bone, tree, pork chop, etc.
Weber Skinner -Type: ASB 560 -Power: 1.6 kW -Cutting width: 560 mm -Cutting range (mm): 0-4, optionally 4-8, 6-10, 8-12 -With meat feeding belt -External dimensions: 2050 x 1850 x 1420 mm -Weight: 460 kg -Power supply: 400V/50Hz -Made of stainless steel -Condition: used in good condition, ready to work
Smoke chamber 1 trolley Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system
Used Automatic Mixer Wolf K+G WETTER, Type: MMAW 114 Type 109 - 114 mm perforated disc diameter - Incl. many attachments, such as 2, 5, 8 and more - Incl. double blade set - With mixing screw and paddle mixing shaft -Stainless steel - Incl. protective grille - All documents available - Technically tested, immediately ready for use - Condition: Very good, regularly serviced and maintained Specifications: - Perforated discs ⌀: 114 mm - Capacity: max. approx. 2,400 kg/h - Hopper capacity: approx. 110 litres -El. Connection: 400 V, 50 Hz, 25 A - Nominal power: 9 kW We will be happy to answer any further questions you may have. Visits and test runs are possible by arrangement.
Automatic evisceration line of 3000 birds/hour 8'' line. - Vent cutter machine 12 / 8" - Opening machine 12/8" - Eviscerator 12/8" - Cropper machine - Neck cutter and puller machine - Final inspection machine - Bird unloader machine This line still running and it will be completely refurbished. Video of the line available.
We are selling here a sausage filler / piston filler from the manufacturer Frey, type Heinrich 20 / H20 in a good used and functional condition. The machine runs on 400 volts, 20 litres capacity, for filling and portioning, completely stainless steel, workshop tested, immediately ready for use, dimensions W/D/H 55/60/106 cm, others on request.
Treif Falcon fixed weight portioning machine, Only 230 production hours, internally and externally in a very good working condition.
KG Wetter 120 bowl chopper with discharge, Stainless steel bowl, overhauled in 2020., STC just acquired this equipment., While we currently received a lot of new stock we didnt find the time yet to do any work to it., Of-course if you are interested we can prioritize to test and inspect, to ensure you will get a 100% working condition machine., If you are interested obviously feel free to contact us so we can gather more information for you.
Used vacuum filler HANDTMANN, type: VF 50 -completely overhauled- For filling, portioning and twisting. - All wear parts renewed - Oil in the vacuum pump and the hydraulics NEW - Incl. twisting gear - Computer control - Up to 300 portions per minute - Technically very good condition - 6 months warranty Capacity: max. 2,400 kg/h Filling pressure: max. 55 bar Portioning range: 5 - 100,000 g Hopper capacity: 40 / 80 l Visits and test runs are possible by arrangement.
Tumbler with cooling system Manufacturer: Gunther Model: GPA 300K Made of stainless steel Volume: 300 liters Capacity: 200kg Dimensions: 1950x1000x2100mm Electric power: 2.5kW
Throughput depending on material type, speed, and cutting set Capacity: up to 10.000 kg/h Main motor power: 22 KW / 30 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm : Width: 150 Length: 150 Height: 170
Pasteurizer for packaged sausage products,, Inlet temperature: 10°C, Pasteurization temperature: 85°C, Final temperature: 1°C,, Heat energy requirement: 0.26 kg steam / kg product - Connected load: 549 kg / h, Cooling energy requirement: specific power consumption 50 watts / kg product, connected load cooling: 337 kW,, Total electrical connection value: 70 kW, for main drive (3 kW), 2 pumps (37 kW), 4 fans (20 kW), exhaust fan (3 kW), belts (3 kW), glycol pump (4 kW), power: 1,600 kg / h (including brine)
Packaging type: Doypack with ZIP, tear notch and gassing, set up for bags with the dimensions: 115 x210mm, in use for mini salami, Performance: 40-50 bags per minute, Depending on the dosage, packaged goods, bag size, filling volume, quality of the packaging, and local conditions., 600mm in roll diameter, 60-80mm core diameter, with zipper,, with fumigation,, with inkjet coding, Suitable for wet areas, including drainage channels, with Multiweigh - multihead weigher HDW 14, 1 - 3 kg, Product feeding via bunker belt, ascending conveyor and cross conveyor, Further data on request., power: 40-50 bags per minute
Weber Skinner -Type: ASB 560 -Motor power: 1.6 kW -Cutting width: 560 mm -Cutting range (mm): 0-4, optionally 4-8, 6-10, 8-12 -With meat feeding belt -External dimensions: 2050 x 1850 x 1420 mm -Weight: 460 kg -Power supply: 400V/50Hz -Made of stainless steel -Condition: used in good condition, ready to work
Linco refurbished compact cut up line - compact structure aprox 9 mts - wing cutter - breas cap cutter - back quarter - drum / chop seperator This line will be completely refurbished after customer order confirmation. We deliver the line with spare parts and warranty.
FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm
FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm
FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available
FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm
Hamburg Machinery HM GmbH 
