The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 152710230
New in: 2010

used

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: 41516 Grevenbroich Land-de

add to watchlist

Pressure plate intermediate table Grafoteam MDT 260 C; condition overhauled; 2 pieces available; Arm length 780mm; Max. Plate size 780x820mm. Plate conveyor Grafoteam MDT 260 C; condition rebuilt; 2 pic. on stock; arm lenght 780mm; max.plate size 780x820mm.

pre press: other
date: 23.05.2024 add to watchlist
approved
dealer
item-No.: 163318790

used

check Seller: F1-TRADE GmbH
Location: Emskirchen - Nuernberg Land-de

add to watchlist

Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-foermige Loecher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat ...

pre press: other /Printing plate punches
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 158072207
New in: 2005

used

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: 41516 Grevenbroich Land-de

add to watchlist

Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.

pre press: other
date: 23.05.2024 add to watchlist
approved
dealer
item-No.: 163318860
New in: 1992

used

check Seller: F1-TRADE GmbH
Location: Emskirchen - Nuernberg Land-de

add to watchlist

Film processor Dupont Easycompact 40Baujahr / Year 1992 - Serial-No. 9169-192Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 157378789
New in: 2007

used

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: Land-de

add to watchlist

Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.

pre press: other
date: 23.05.2024 add to watchlist
approved
dealer
item-No.: 163319128
New in: 1999

used

check Seller: F1-TRADE GmbH
Location: Emskirchen - Nuernberg Land-de

add to watchlist

Druckplatten - Entwicklungsmaschine / Plate Processor AZ FEYear 1999 - Serial-No. XX158 Working width max. 300mmOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 158690815
New in: 1999

used

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: 41516 Grevenbroich Land-de

add to watchlist

Film development machine G+J ML 400; good condition; cleaned and tested; Working width 400mm; Daylight cassette. Film processor G+J ML 400; good condition; cleaned and checked; working width 400mm; daylight cassette.

pre press: other
date: 23.05.2024 add to watchlist
approved
dealer
item-No.: 163318913
New in: 2007

used

check Seller: F1-TRADE GmbH
Location: Emskirchen - Nuernberg Land-de

add to watchlist

Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-SystemYear 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40AOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 119631373
New in: 1997

used

check Seller: Joachim Ethner Handelsvertretungen
Location: D - Nordrhein-Westfalen Land-de

add to watchlist

Printing plate punch Beil 425 stand model; good condition; Punching 425mm round; with adjustable ring visor bolts; Foot pedal; Max. Plate width 97cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

pre press: other
date: 23.05.2024 add to watchlist
approved
dealer
item-No.: 163318746
New in: 1992

used

check Seller: F1-TRADE GmbH
Location: Emskirchen - Nuernberg Land-de

add to watchlist

CTF Filmbelichter - CTF Computer to Film Heidelberg QUICKPLATERYear 1992 - Serial-No. 40509/17 CTF Imagesetter AGFA AccuSet 800 PlusOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 135181329
New in: 2006

used

check Seller: Joachim Ethner Handelsvertretungen
Location: Land-de

add to watchlist

Printing plates firing furnace Eurografica baby; good condition; cleaned and checked. suitable for 4 plates; Max. Plate width 75 cm; new hood shocks; Timer. Plate backing oven Eurografica baby; good condition; cleaned and checked; used for 4 plates, max.plate width 75cm; new lift; Timer.

pre press: other
date: 22.05.2024 add to watchlist
item-No.: 163182873
New in: 1995

used

Seller: Steenholdt
Location: Lager Land-de

add to watchlist

max. exposition size: 70 x 90 cmexposing power: 2,5 kWweight: 189 kgserial no.: 89110195 voltage: 220 Vcurrent: 11 Adispersion foil automaticdrawer cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approved
dealer
item-No.: 149532203
New in: 2015

used

check Seller: Joachim Ethner Handelsvertretungen
Location: 41516 Grevenbroich Land-de

add to watchlist

Printing plate development machine Agfa Elantrix 125 HX; good condition; cleaned and tested; Inlet width max.1250mm, min.200mm; Plate length max.1500mm, min.315mm; Plate thickness 0.15-0.50mm; Cooler. Plate processor Agfa Elantrix 125 HX; good condition; cleaned and checked; max plate width 1250mm, min.200mm; max.plate lenght 1500mm, min.315mm; plate thikness 0.15.0,50mm; cooling unit.

pre press: other
date: 22.05.2024 add to watchlist
item-No.: 162889258
New in: 1999

used

Seller: Steenholdt
Location: Lager Land-de

add to watchlist

max. film width: cmmax. speed: /hserial no.: 55C P0009 inlet width: 55 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 119631450
New in: 2000

used

check Seller: Joachim Ethner Handelsvertretungen
Location: D - Nordrhein-Westfalen Land-de

add to watchlist

XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

pre press: other
date: 22.05.2024 add to watchlist
item-No.: 162889269
New in: 2001

used

Seller: Steenholdt
Location: Lager Land-de

add to watchlist

serial no.: 00701 weight: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 144810358
New in: 2000

used

check Seller: Joachim Ethner Handelsvertretungen
Location: 41516 Grevenbroich Land-de
Price: 900 € add to watchlist

Duck plate stacker G+J Platestacker 85; good condition, cleaned and tested; Working width 850mm; with plate trolley. Platestacker G+J Platestacker 85; good condition; cleaned and checked; working width 850mm; with plate trolley.

pre press: other
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 162450701
New in: 2009

used

check Seller: René Reiser | Grafische Maschinen
Location: Lager Land-de

add to watchlist

Capacity: 1900 WattTemperature Dryer: 45 °Cvolt: 230 VClunz & Jensen C85 plate cleaning unitOnline versionplate width: 230 - 850 mmPlate length: 300 - 1100 mmPlate thickness: 0.15 - 0.30 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pre press: other /Printing plate punches
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 147102381
New in: 2014

used

check Seller: Joachim Ethner Handelsvertretungen
Location: 41516 Grevenbroich Land-de

add to watchlist

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

pre press: other
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 164121324
New in: 2010

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Length: 2200mm, width: 1260mm, height: 2280mm, weight: 1.59t, operational hours counter: 66,511h.

pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 139876033
New in: 2013

used

check Seller: Joachim Ethner Handelsvertretungen
Location: Land-de

add to watchlist

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

pre press: other
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 164121325
New in: 2010

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Including documentation, paper and software, it might be necessary to adjust the software.

pre press: other
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 150938623
New in: 2005

used

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: 41516 Grevenbroich Land-de

add to watchlist

Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.

pre press: other
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 164121326
New in: 1996

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Working width: 2500mm, laying width: 2500mm, speed: 55-60m/min, web weight: 80-500g/m², length: 6350mm, width: 3820mm, height: 1935mm, operational hours: ca. 59,000h.

pre press: other
date: 17.05.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 162811124
New in: 2023

new

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: 41516 Grevenbroich Land-de
Price: 8 € add to watchlist

On behalf of the customer ELITE PRO 1030 x 790-30 WEB MW600 THERMOSTAR PRINTING PLATE Art-No. 600290-600PRO K/V 390 Piece(s) in original box

pre press: other
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 164121327

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Pressing cylinder circumference: 1060mm, plate cylinder circumference: 240-1000mm, length: 8000mm, width: 1880mm, height: 1410mm, weight: 860mm.

pre press: other /Plate developers
date: 07.05.2024 add to watchlist
approved
dealer
item-No.: 164010055
New in: 2007

used

check Seller: AGM Graphische Maschinen
Location: 38259 Salzgitter-Bad Land-de

add to watchlist

67x75cm, Min: 24x24cm, Max Image Area: 66,8x75cm, Resolutions: Max. 2540 dpi, 64 Diodes, 15 Plates/hour, Advance PST 26 Stacker, Standard Accessories

pre press: other
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 162967864

used

Location: Land-de

add to watchlist

Reference Num.: 3459Brand: SIS Pa?systemType: 50 x 70 cmAvailable: directlyStatus: In productionLocation: Deutschland

pre press: other
date: 06.05.2024 add to watchlist
approved
dealer
item-No.: 160130319
New in: 2011

used

check Seller: Joachim Ethner e.K. Vertrieb und Handel
Location: 41516 Grevenbroich Land-de

add to watchlist

washout Agfa Azura C 95; good condition; cleaned and tested; new infeed and medium rollers incl. Bearing; suitable for chemical-free negative plate Agfa Azura; Infeed width 200-950mm; Min. Panel length 310mm; Panel thickness 0.15-0.30mm; Inlet and outlet table. Cleaning unit Agfa Azura C 95; good condition; cleaned and checked; new infeed and middle rollers incl.bearings; used for chemfree negativ plate Agfa Azura; Einfeed width 200-950mm; Min. plate lenght 310mm; plate thikness 0,15-0,30mm; infeed aand outfeed table.

pre press: other
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 161317746
New in: 2003

used

Location: Land-de

add to watchlist

Reference Num.: 3992Brand: HEIGHTSType: Inca 70 Polymer Processor (CTP)Construction year: 2003Available: directlyStatus: Not in productionLocation: EuropaEquipment:- Maximale Plattenbreite: 811 mm (31.9?)- Minimale Plattenl?nge: 254 mm (10.0?)- Dicke der Platte: 0.15 - 0.30mm (0.006 - 0.012?)

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information