Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg
: neu : 2025 : 090086 : prompt, Zwischenverkauf v : Türkei : 7400 €: 142.82 €: 1 : 197 mm: 4 mm: 2 mm: 20 1/min: 90 °: 4 kW: 890 mm: 780 mm: 1115 mm: 550 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Release Station 1: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Knife length 225 mm Station 2 Incision: Max. cutting width: in one cut 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg
plate thickness: 4 mmblade length: 220 mmpressure: 0 tweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,6 x 1,7 x 1,6 mtotal power requirement: 2,5 kWCombined notching machine with a fixed 90° angle and an adjustablerectangular notching unit variable up to 200mm length x fixed 100mm width.There are 2 manually adjustable stops with a digital display.Axle length X900mm / Y300mmThere is no stamp holder / punch / hold-down device for this.These parts can be purchased from Boschert.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 3-4 mmpressure: 0 tCutting length: 220 mmtable height: 900 mmquantity of oil: 35 lTable dimensions: 950 x 790 mmtotal power requirement: 4 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 1,0 x 0,86 x 1,2 mFoot switch angle adjustment 30°-140° automatic cutting gap adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data: - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² strength 4 mm - at 700N/mm² strength 2.5 mm - Alu, plastic 6 mm - Cutting angle 90 ° - Depth stops - Footswitch - Space requirement approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg
plate thickness: 6 mmpressure: 18 tblade length: 220 mmangle adjustable from - to: 90 Gradtable surface area: 1100 x 950 mmchamfer lenght: 835 mmtotal power requirement: kWweight of the machine ca.: 1,1 tdimensions: 1,2 x 0,8 x 1,4 mCombination machine: edging and notching- foot switch- Emergency stop switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25496 Hydr.- Univ. - Two-station – sheet metal notching machine + hole punch Technical data: Station 1. Notching device - Cutting length up to 220 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Infinitely variable cutting angle adjustment by handwheel 30 - 140 ° - Pneumatic clamping - Locking stops left + right - Table support surface 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Station 2. Kanteinrichtung oder Lochstanzeinrichtung - Max. pressure capacity 200 kN - Working speed 0 to 10 mm/sec - Bending device up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive 400 V / 4 kW - E – Footswitch - Space requirement approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg
plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...
Key data: 3 mm, 1050 mm
Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T
plate thickness: 4 mmcutting angle adjustment: 30-120 °table height: 900 mm: 407 weight of the machine ca.: 760 kgdimensions of the machine ca.: 1300x1000x1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25311 Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 /min - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Footswitch - Space requirement approx. W 1300 x H 1250 x D 1300 mm - Weight approx. 800 kg - Mobile undercarriage
plate thickness: 4 mm STplate thickness: 3 mm VAblade length: 225 mmengine output: 3,5 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1250 x 900 x 1100 mmFeatures:- 2x miter stops- 90° fixed angle- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Footswitch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg
plate thickness: 8 mmpressure: 60 tnotching: width x thickness: 310-310-8 mm mmweight of the machine ca.: 3,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical information Exhibition Machine Brand INDUMASH Manufacturer's ref. NOTCHING MACHINE SAF 2 Model SAF 204 Table size 700 x 620 mm Weight 550 kg Gross weight 550 kg
plate thickness: 2,0 mmtube diameter: 60,0 mmmotor: 400 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. sheet thickness: 4 mm steel, 3 mm stainless steel Knife length: 250 mm Strokes per minute: 52 Weight: approx. 900 kg Knife sharpened Depth stop
plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...
Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Digital angle displays on the right and left Weight: approx. 1,200 kg
plate thickness: 6.0 mm STthickness at Niro-steel: 4.0 mmplate thickness: 8.0 mm ALUangle adjustable from - to: 30 - 140 Gradtable:: 950 x 890 mmblade length: 220 x 220 mmstroke: 35 H/minwork height max.: 1150 mmtotal power requirement: 3.0 kWweight: 800 kgrange L-W-H: 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=QmUbaV41BfAEquipment:- electro-hydraulic notching machine with adjustable angle 30° – 140°- cutting capacity up to 6.0 mm sheet thickness (R42/mm2)- made of the special spheroidal cast iron GS500.- the cutting movement takes place from top to bottom- robust work table made of steel with conical grooves which ensure optimal adhesion of the stop angles- the scales are embossed- automatic cutting gap adjustment (patented)- system for the automatic adjustment of the gap betwee ...
DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60 ...
plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397088The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 225 mm
Sheet thickness 6 mm Knife length 225 mm Machine weight approx. 1.2 t Space requirements approx. 1.1 x 1.4 x 1.5m Total power requirement 55 kW Notching machine with fixed angle 90°
plate thickness: 8.0 mm STplate thickness: 5.0 mm VAtable-size: 1000 x 950 mmblade length: 200 x 200 mmstrokes per minute: 60 H/minadjustable: Winkel 30°-140° mmwork height max.: ca. 950 mmoil volume: 60.0 lengine output: 4.0 kWweight of the machine ca.: 1200 kgrange L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 eurosFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- Adjustment by hand wheels (left + right knife segment)- hardened knives also for cutting stainless steel- front panel- electro-hydraulic knife clamping- Inching mode for setting the shear blades selectable (manual mode)- planed table surface, with T-slots to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- 2x blank holders- 1x free moving footswitch- front scrap switc ...
Key data: 4 mm
Indumasch V 204 - Angle-adjustable notching machine Cutting length: 200 mm Capacity: 4 mm - Stroke adjustment with digital display - Lateral clippings ejection - Workplace lighting - Foot pedal Specifications - Cutting length: 200 mm - Cutting capacity steel: 4 mm - Cutting capacity stainless steel: 3 mm - Stroke rate: 60 /min - Cutting angle adjustment: 30 - 135 ° infinitely variable - Table dimensions: 1000 x 800 mm - Oil tank: 60 l - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1480 x 1600 mm - Weight: approx. 970 kg More products, information & prices on metallmaschinen.at
plate thickness: 4.0 mm STplate thickness: 3.0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4.0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Knife sharpened Weight: approx. 1,200 kg
: 4.0 mm: 3.0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3.0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried ou ...
Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69
plate thickness: 4.0 mmthickness at Niro-steel: 3.0 mmblade length: 200 mmangle adjustable from - to: 30 - 120 Gradno. of strokes: 60 Hub/minoil volume: 60.0 ltr.table:: 1000 x 800 mmtotal power requirement: 2.62 kWweight: 800 kgrange L-W-H: 1000 x 1500 x 1440 mmFurnishing:- robust hydraulic notching machine, with adjustable angle- Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels- hydraulic clamping and locking- Infinitely adjustable cutting depth, with digital display- 2x locking accuracy stop, with stop bars- Stripper for sheet metal cutting- Collecting container for clippings- Freely movable foot pedal for triggering the strokeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4 mm
Max. sheet thickness: 4 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Hydraulic knife clamping and locking+ Cutting depth infinitely adjustable with digital display New set of upper and lower knives installed Weight: approx. 1,000 kg
plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 6 mm
Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW
plate thickness: 3 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 790 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,9 x 1,1 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg
plate thickness: 8 mmblade length: 250 mmangle adjustable from - to: fest table surface area: 840 x 750 mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,3 tdimensions: 1,4 x 1,1 x 1,5 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg
plate thickness: 1,6 mm: 4 tblade length: 156 mmangle adjustable from - to: fest Gradtable surface area: 450m x 305 mmtotal power requirement: Handbetrieb kWweight of the machine ca.: 95 KgDimensions (LxWxH): 530 x 380 x 480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg
plate thickness: 4 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 800 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,9 x 1,1 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg
plate thickness: 3 mmpressure: ? ttotal power requirement: 3,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,3 x 0,9 x 1,1 mNo. 3549Notching machine BOSCHERT K 30 / 120 MINI No. 1Working area: Table 800 x 450Drive: 3,5Foot switchTable 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°)Space requirement approx. 1300 x 900 x 1100 mmWeight approx. 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 41.9 x 2.7 R21 x 8 mm Featured with - Foot pedal - Operating Instructions (NL) Pneumatic machine
plate thickness: 6,0 mmpressure: 18 tcutting angle - upper blade: 90 °blade length: 225 x 225 mmvoltage: 380 Vtotal power requirement: 5,5 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1,10 x 0,80 x 1,05 m- Angular stops adjustableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Combined punching machine, hydraulic Hydraulic Ironworkers 4 kW 900 kg
plate thickness: siehe TD mmpressure: siehe TD ttotal power requirement: 4 kWweight of the machine ca.: 0,950 tdimensions of the machine ca.: 900 x 1050 x 1300mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Unclinking machine, little used Notching machine , lessly used Type: VA 200/ 4 Built / yom: 1995 Manufacturer / make: KEMPFLE Table size: 1000 x 800 mm Power:/ capacity: 4 mm / for steel / steel 400 Nm/mm 3 mm for stainless steel 600Nm/mm Length of cutter blades: 205 mm Number of Strokes/ strokes: 60 per minute Cutting head/ cutter head: 30...135° (stepless) Weight / weight: 1.15 tons Connection value/ connected power: 4 kW
Manual cut-out shears of excellent quality, for the burr-free cutting of sheet metal up to 1.5 mm sheet thickness steel sheet/ST40 – aluminium 2 mm, backdrop-guided knife beam, shear length 150 x 150 mm, clink angle 90°, dimensions 460 x 500 x 810 mm, weight 75 kg
