used
Working width: 1050 mm sheet thickness: 1.5 mm top rollers Ø: 70 mm bottom rollers Ø: 70 mm weight: 320 kg space requirement: 700 x 1300 x 1100 mm
used
Manufacturer: BIKO Type: B3 3138 Manufacturing year: 2010 Rolling capacity: 25 mm Maximal length: 3000 mm Roll length: 3120 mm Top roll diameter: 385 mm Bottom roll diameter: 350 mm Overall dimensions: 5300 x 1900 x 2000 mm Weight: 15.000 kg
used
sheet width: 2050 mmplate thickness: 7,00 mm max.pre-bending capacity: 5,00 mmroll diameter: 170 mmbending speed: ca. 3,0 m/mintotal power requirement: 2,2 kWweight: 2100 kgrange L-W-H: 3000 x 900 x 1300 mm very good condition () New price ~ 40.000 eurosFurnishing:- Electrically driven top and bottom rollers- swing-out top roller- asymmetrical roller arrangement, with bending- Motorized side roller (foot switch)- digital position display for side roller- manual delivery of the bottom roller, using a hand lever with analogue SIKO display- self-braking main motor- Safety device (safety line)- free-moving foot control- original instruction manualSpecial equipment included in the price:- Motorized rear roller adjustment- digital position display for rear rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2050 mmplate thickness: 7,0 mm max.pre-bending capacity: 5,0 mmroll diameter: 170 mmbending speed: ca. 3,0 m/mintotal power requirement: 2,2 kWweight: 2100 kgrange L-W-H: 3000 x 900 x 1300 mm very good condition () New price ~ 40.000 eurosFurnishing:- Electrically driven top and bottom rollers- swing-out top roller- asymmetrical roller arrangement, with bending- Motorized side roller (foot switch)- digital position display for side roller- manual delivery of the bottom roller, using a hand lever with analogue SIKO display- self-braking main motor- Safety device (safety line)- free-moving foot control- original instruction manualSpecial equipment included in the price:- Motorized rear roller adjustment- digital position display for rear rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plate roll bending machine with prepinch Capacity Plate thickness 30 mm Plate width 2000 mm Pre-pinch 25 mm Top roll dia 400 mm lower rolls dia 380 mm max plate width 2050 mm power electric driven rolling on centralized gear unit side rolls hydraulic bending with pre-pinch Upper roll pinch press positioning for prebend Hydraulic open front drop-end to unload round closed shells Centralized control panel electric control with digital readout of the rolls machine dimension mm 4900 x2000 x H2400mm - Weight 22ton -voltage 380 / 50 Power total installed 50 Hp Machine controlled , cleaned, greased, in working condition , ready for use.
used
Max. length of plate 2000 mm Max. plate thickness 16 mm Number of rolls 3 pcs Max. pre bending capacity 13 mm Main motor power 15 HP
used
MODEL 3HCI 25.20 CACCIN 2500X20/16 MM HYDRAULIC 3 ROLL PLATE BENDING MACHINE DUAL INITIAL PINCH PYRAMID PREBEND TOP ROLL MM 320 – SIDE ROLLS MM 300 PLATE WIDTH MAX 2550 MM CAPACITY THICKNESS 20 MM PREBEND 16 MM VOLTAGE VAC 400/50 – MOTOR ELECTRIC KW 15 RUN THE HYDRAULIC POWER UNIT --- MINIMUM ROLLING DIAMETER Ø 400 MM FULLY HYDRAULIC OPERATED LINEAR GUIDEWAYS TECHNOLOGY HARDENED SURFACE OF THE 3 ROLLS FRONT DROPEND HYDRAULIC OPEN WITH TOP ROLL TILT-UP POWER DRIVEN ROTATION NR.3 ROLLS WITH GEARUNIT AND HYDROMOTOR CONES PLATE BENDING -CONTRAST CONE ROLLER HARDENED – SIDE ROLLS TILTABLE TO THE ANGLE OF THE CONES CONTROL PANEL MOVABLE ON WHEELS WITH ELECTRIC CONTROL AND DIGITAL POSITION READOUT OF THE ROLLS LAYOUT MACHINE DIMENSION CM 535x150x H175CM -WEIGHT 12500 KGS EMERGENCY STOP AND SAFETY DEVICES CENTRALIZED AUTOMATIC LUBR ...
used
sheet width: 2050 mmplate thickness: 10 mmpre-bending: 2 Walzen0: 230-220 mmtotal power requirement: 9,2 kWweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,7x1,25x1,35 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
plate thickness: max. 1,5 mmsheet width: max. 1.020 mmYear: ca. 1970 manual: : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC Bending Machine Fabr. FASTI Type 104-20-1Machine -No: 9314008 Year 1993Effective length: 2040 mmSheet thickness: 1.0 mmRoll diameter: 80 mmMotor power: 1,1 kWWeight approx: 660 kgWith- CNC Control- 4 different cambered rollersxa0xa0 for extremely precise tube productionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Specifications: working width 2040 mm - material thickness 1.0 mm - Roll diameter upper + lower roller 80 mm - rubberized rear roller 88 mm - Stroke 70 mm - Rear roller + lower roller adjustable for conical bending - Top and lower roller motor driven - Working speed right + left 6 m/min - Drive 400 V / 1.1 kW - Space requirement approx. W 2650 x H 1050 x D 650 mm - Weight approx. 660 kg - with: - asymmetrical roller arrangement - man. Back roller adjustment - Bending - swivelling top roller - E-foot switch for right and left rotation
used
Offer 23162 Specifications: - max working width 1540 mm - max material thickness 3 mm - Roll diameter 110 mm each - Stroke 70 mm - Rear roller + lower roller adjustable for conical bending - Upper and lower rollers motor-driven - Working speed right + left 6 m/min - Drive 400 V / 3.7 kW - Space requirement approx. W 2560 x H 1100 x D 870 mm - Weight approx. 900 kg - with: - asymmetrical roller arrangement - Crowned naturally hardened rollers - Conical bending device / bending - swing-out upper roller - E-foot switch for clockwise and counterclockwise rotation
used
sheet width: 103 mmweight: 300 kgdrive: ja : Gußhebel abgebrochen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Power 2000 x 12 mm
used
Manufacturer: Festo Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Plate width: 500 mm Number of castors: 6 Voltage: 380 V
used
specifications - three driven rollers - Underrollers motor-adjustable for bending and conical rolling - Side brackets or folding bearings can be swivelled out - Operation of separate control panel - max. working width approx. 3050 mm - max. sheet thickness at 400 N/mm2 approx. - without bending 12 mm - with bending 8 mm - mot. Stroke of the lower rollers approx. 120 mm each - Upper roll diameter approx. 260 mm - Lower roll diameter approx. 265 mm each - extended roller ends for setting up profile rollers - Drive 400 V / 10 kW - Pneumatic connection 8 bar - Working speed approx. 5 m/min - Working speed with bending approx. 0.5 m/min - Space requirement approx. W 5400 x H 1800 x D 1450 mm - Weight approx. 8800 kg
used
working width: 1500 mm for sheets up to: 1 mm Roller Ø: 65 mm Sub-roll lining for sheet metal clamping Rear roller adjustment for adjusting the bending radius and conical bending Top roller can be swivelled out Space requirement: 2000 x 600 x 1200 mm
used
sheet width: 2050 mmplate thickness: 6,00 mmpre-bending: 4,00 mmdiameter of upper rolls: 160 mmdiameter of lower rolls: 140 mmtotal power requirement: 2,2 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 3,5 x 1,5 x 1,3 m New price ~ 45.000 euros from a maintenance workshop rarely used ()Furnishing:- hydraulic 4-roller bending machine- with conical bending device Inclination of the bottom roller and the side rollers Alignment in parallelism in each side roller position Hardened stop roller Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50%- pivoting operation- Digital displays (2 pieces) for the side roller position- Adjustable contact pressure of the bottom roller with manometer- hardened rollers SAE 1050 CK 45- Conical bending device- Hydraulic folding store for removing closed pipes- Direct drive of the upper and lower ...
used
sheet width: 2050 mmplate thickness: 6,0 mmpre-bending: 4,0 mmdiameter of upper rolls: 160 mmdiameter of lower rolls: 140 mmtotal power requirement: 2,2 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 3,5 x 1,5 x 1,3 m New price ~ 45.000 euros from a maintenance workshop rarely used ()Furnishing:- hydraulic 4-roller bending machine- with conical bending device Inclination of the bottom roller and the side rollers Alignment in parallelism in each side roller position Hardened stop roller Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50%- pivoting operation- Digital displays (2 pieces) for the side roller position- Adjustable contact pressure of the bottom roller with manometer- hardened rollers SAE 1050 CK 45- Conical bending device- Hydraulic folding store for removing closed pipes- Direct drive of the upper and lower ro ...
used
Three-roll bending machine make MG type MG 108 AMachine -No: 01226 built in 2002Technical specifications:max. bending length: 1050 mmSheet thickness max.: 12 mmSheet thickness max.: 8 mm for NiRoTop roller diameter: 140 mmBottom roll diameter: 140 mmMin drm. 230mm at :5mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
3-roll hydraulic 3000x30 mm pre-pinch planetary MG model G3030 year 2021 -Plate width 3000 mm -Capacity thickness 30 mm -Pre-pinch 25 mm -width on the rolls 3100 mm -upper roll size 400 mm -lower rolls size 380 mm -Hardened rolls surface. -All driven 3rolls gear box motorized each synchronized rotation -Conical plate bending attachment , rolls tilting & contrast roller. -Operator console with directional joysticks and digital readouts -Front drop-end open hydraulic -Emergency and safety installation -User manuals and instruction books. -Electric power 25 HP on the hydraulic unit. -V400/50
used
Bending capacity: Plate width: 3000 mm Plate thickness 140 mm Thickness max 200 mm depending on plate width and yield strength Technical data: 3100 mm Surface useful length on rolls 940 mm size of Top roll 840 mm size of Lower rolls 210 mm max thickness opening between the rolls 400/50 Vac voltage - rewirable 480/60 220 Hp Power electric installed Configuration installed with the machine Hardened surface of the 3 rolls. Conical plate bending hydraulic attachment with hardened contrast pad. All the 3 rolls driven with axial gearbox and motor each roll independent Calibration system for the re-rolling of welded shells rounding unwanted flat spots. Console electric on wheels with centralized commands joysticks and digital readout. Opening front side hydraulic drop-end to unload closed shells. Variable speed working s ...
new
sheet width: 1020 mmplate thickness: 3,5 mmroll diameter: 90 mmtotal power requirement: 0,75 kWweight of the machine ca.: 310 kgElectric 380 Volt: Foot switch: Symmetry roll arrangement.This machine is in the following sizes obtainable:worhing length from 1020 until 2520 mm,max. plate thickness ( 400 N/mm² ) from 1 until 8 mm.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plate Bending roll Variable geometry - machine used brand Parmigiani - Italy model 3 roll capacity 3100x100 mm Performance 3000x 100 mm into ID Ø 3500 mm 3000x 85 mm into ID Ø 2500 mm 3000x 70 mm into ID Ø 1500 mm 1500x 125 mm into ID Ø 3500 mm Rolls surface length mm. 3150 Top roll size 720 mm Side rolls size 710 mm Total power installed 200 Kw - Voltage Vac 380 /50 Dimension 10mtrs x 4 mtrs x H 4,8 mtrs -Weight aprox 150 Ton -Upper roll pre-pinch hydraulic control position with digital readouts -Lower rolls variable geometry by-directional control with digital position readout. -Driven lower rolls rotation electric motor with power control on digital readout. -Lower rolls driven rotation with centralized powered gear unit -Front open hydraulic drop-end upper roll tilt-up very wide opening. -Conical plate bend ...
used
sheet width: 2050 mmplate thickness: 3,0 mm max.roll length: 2050 mmroll diam. toproll: 130 mmbending speed: 3,0 m/mintotal power requirement: 2,2 kWweight: 1530 kgrange L-W-H: 3220 x 1200 x 900 mm very good condition () current new price ~ 17.000 eurosFurnishing:- Electrically driven top and bottom rollers- swing-out top roller, with folding bearing- asymmetrical roller arrangement- manual delivery of the bottom roller, by hand wheel- self-braking main motor- Profile inlets in the rollers- Safety line- free-moving footswitchSpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustment- digital position display for rear rollerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2550 mmplate thickness: 6 mmweight of the machine ca.: 3,9 t: Rollensatz für Rohrwalze The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Working width: 3000 mm sheet thickness: 15 mm sheet thickness in bending: 10 mm top rollers Ã?: 320 mm bottom rollers diameter: 310 mm speed: approx. 5.5 m / min. Connection: 380V kW weight: 17000 kg space requirement: 5450 x 2100 x 2450 mm
used
3-roll bending machine make SCHÄFER type SRMVS 1500/13Masch. -No: 3522 1500/15 / 8,5 / 7 built in 1971Bending length: 1540 mmMax. Sheet thickness: 13 mmBending capacity ST / VA: 8.5 / 7.0 mmRoll diameter: 200 mmExternal dimensions approx. 4000 x 1300 x 1900 mmWeight approx. 5,0 tWith- 3 rollers driven- all 3 rollers mot. adjustable- Mot. obliquely adjustable bottom rollers- suitable for conical bending- Folding bearing mounting by hand- sep. mobile control panelused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
sheet width: 2000 mmplate thickness: 20 mmpre-bending: 15/11 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mwith initial roundingTechnische Daten:/ technical detailsBiegelänge / bending lenght 2000 mmmax. Blechstärke / max. sheet thickness 20 mmAnbiegeleistung / initial rounding 15/11 mmWalzendurchmesser Unterwalzen / roll diameter below rolls 280 mmOberwalzendurchmesser / diameter of the upper roll 300 mmAntriebsleistung Hauptantrieb / drive capacity main drive 16,2 kWAntriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kWAntriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kWGewicht ca. / weight ca. 14200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are n ...
used
Machine in working condition
used
Sheet thickness normal bending: 14mm yield strength 240N/qmm Sheet thickness bending : 8mm Bale length of rollers: 3100mm Diameter of the upper roller: 300mm Diameter of the bottom rollers: 300mm Main Motor : 15KW
used
Working width: 1040 mm sheet thickness: 1.25 mm sheet thickness in bending: top rollers diameter: 56 mm bottom rollers diameter: 56 mm weight: 190 kg space requirement: 1450 x 460 x 1030 mm
used
Heavy, older motorized three-roll bending machine Fab. UNKNOWNTechnical specifications:Working length: 1500 mmMax. Bending strength: 5.0 mmRoller diameter: 145/130/165 mmlower roller with grooves spaced: 50 mm apartDrive power: 5.0 kWWeight approx: 1.0 tExternal dimensions approx .: 2600 x 1250 x 1400 mmWith- swiveling top roller- Emergency stop switch- R + L run- Conical roundsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Specifications: working width 1600 mm - material thickness ST 40 11 mm - sheet thickness with bending 9 mm - Top roller diameter 210 mm - Sub-roll diameter 200 mm - both sub-rollers with mot. Hub - Top roller with folding bearing - both sub-rollers mot. driven - Working speed right + left approx. 4 - 6 m/min - Drive 400 V / 9 kW - Space requirement approx. W 4900 x H 1650 x D 1100 mm - Weight approx. 6200 kg