We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
2 roller banding machine Hunkler LAM 600; good condition; cleaned and tested; Working width 600mm; Linen pool height adjustable; suitable for cold glue. Two rollers gluing machine Hunkeler LAM 600; good condition; cleaned and checked; working widht 600mm; glue reservoir adjustable in hight; used for cold glue.
used
connection value: 380/400 Voltconnection frequency: 50 HzYear: 1984/1990 Year of construction 1984 / 1990- Vacuum feeder- Laminating station 12.3024/1- Press belt 1100 12.302431The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Size 52 x 74 cm, Automatic feeding, Adjustable side bracket, Temperature control by sensor, Pneumatic pressure roller.
used
Lamina 1620 FAS+, Year: 2019, Max.Size: 1600 x 2000 mm, Min.Size: 500 x 500 mm, Max.Speed: 5000 Sh/h, Cardboard: 130 - 350 g/m², Corrugated board: 0.6 - 10 mm, Pallet height: 1600 mm
used
AUTOMATIC LAMINATOR B&F MECCANICA DRY -Year 2004, High pile -Min paper thickness 110 grms/Sqm- Max 350/400 grms/Sqm -Max mechanical speed: 100 m/min -Min. format sheet: 300 mm x 280 mm -Max. format sheet: 1030 mm x 1400 mm -Max roll diameter : 400 mms. -Electric power machine: 24 kW -Compressed air: 6 bar -Automatic MABEG feeder, Suction feeder table -Diathermic oil-heated calander with MTA autonomous thermal unit -Automatic sheet separator -Automatic stacker in delivery -Complete italian made, New delivery belt
used
Laminiermaschine / Laminator GMP Eurolam IDH 540IIIYear 2015 - Serial-No. CJ00340K Bogengroesse / Paper Size max. 540x740mm Arbeitsgeschwindigkeit / Laminating Speed max. 30m/min Papierstaerke / Substrate Thickness 120-350g/㎡ Front Roller Diameter T: 163mm / B: 150mm Rear Roller Diameter Laminating Temperture max. 150℃ Power Consumption 12kWDie Maschine verfuegt ueber eine Induktionsheizung, pneumatischen Zylinder-Andruck und eine professionelle PID-Temperaturkontrolle. Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nuernberg - Can be test
used
Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.
used
UV-Beschichtungsmaschine - UV-Coating machine Billhoefer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
HEIDELBERG SBG + FTP HOT FOILING SYSTEM -Heidelberg Cylinder max paper size 56x77 cms. with italian FTP hot foiling attachment installed in 2007 -Honeycomb chase max size 75x55 cms. with 3 ways temperature controls -Two pulls with PLC control for all the functions- Option of the third pull installed -The machine has been totally rebuilt and refurbished from FTP Italy in 2007 -The machine can also die cut, frame available -All parts and accessories, Available immediately in our warehouse
used
Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WSYear 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screenThe Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nuernberg - Can be test
used
1 sided, sheet fed, thin film, thermal laminator for medium and long run lengths Max sheet size: 1060 x 1550 mm Min sheet size: 28.5 cm x 32 cm Max speed: 120 m/min 80 gsm to 650 gsm Small Footprint Siemens Electronics Heavy-duty build quality FEEDER Heidelberg Speedmaster feed head Rising pile, back separation, stream feeder Feed head processor controlled for accurate under-lap Max pile height of 1.1 m LAMINATOR Water heated chrome laminating roller Digital temperature control up to 135°C (275°F) Rubber counter-pressure roller Pneumatic nip pressure up to 6 metres tonnes Film mounted on a quick-change inflatable air-shaft Film roll slitting and perforating mechanisms Pneumatic clutch ensures precise film tension SHEETER Bump/burst separator runs in-line Features include adjustable pro-active anti-curl bar, secondary perforating mechanism, and in-feed hold roller ...
used
UV-Beschichtungsmaschine - UV-Coating machine Billhoefer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-UV-Beschichtungsmaschine - UV-Coating machine Billhoefer CPUV-
used
Tünkers Liliput 800 banding machine; cleaned and tested; Working width 800mm; suitable for cold glue; Pressure section. Gluing machine Tünkers Liliput 800; cleaned and checked; working width 800mm; used for cold glue; pressing down unit.
used
Rollen-Laminiergeraet - Roll Laminator GBC Aquila 65Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiss-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgsOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
2-roller banding machine drinking flax ZW 400; cleaned and tested; Working width 400mm; Glue basin height adjustable; suitable for cold glue; 2 pcs. in stock. Two rollers gluing machine potions ZW 400; cleaned and checked; working width 400mm; glue reservoir adjustable in hight; used for cold glue; two machines on stock.
used
Rollen-Laminiergeraet - Roll Laminator GBC Ultima 65Year 2018 - Serial-No. PGG0734 Formatbreite / Size width max. 650mm Heiss-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 685mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 889 x 355 x 533mm Weight 62.4Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Billhöfer Ek 102/70 Year of construction 2002
used
Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110Year 2009 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hourTop Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Registration Accuracy Up to 0,2mm (0,008”)Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size (widthxlength) 2050mm x 460mm - weight 2800kgsOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on ...
used
Robopac film stretching machinePlatform Ø1500 mmMax pallet size 1200x1200 mm.Max load 1500 kg.Max height 2200 mm.Includes ramp for climbing the machine (height 50 mm.)
used
STANDARD-EQUIPPED
used
105 X 145 cm Sheeter with heating Powder Dusting Dusting for heater Machine has suitable to cut any work even Poliester and PVC too. Tank for Puhr Glue High Speed Machine It can work from 70 gr till 900 gr It is well maintanenced It is very good condition Available immediately.
used
Machine was hardly used!
used
Stock 14R5-P / 1250 P - laminating machine year 2004 max. size 1,250 x 1,640 mm min. size 500 x 500 mm Paper 100-400 GM2 Solid Board max. 350 g corrugated board max. 7 mm in production good condition
used
STANDARD-EQUIPPED
used
roll width 420 mm
used
STANDARD-EQUIPPED
used
Material width until 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. With circulating air up to 120°C Dryer length 2 x approx. 2.2 m Thermo oil ...
used
used
KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.
used