Model
(Manufacturer: ELUMATEC)
Manufacturer: Elumatec Model: TS 161/21 Year: 2005 Condition: Used Stock number: 9600 Maximum sawing speed: 3200 1/min Wheel diameter: 280 mm Machine weight: 130 kg Equipment: 2 x roller conveyor (2 x 3 m) Replacement lens
Offer 26310 Technical data: - Saw blade diameter 380 mm - Mitre adjustment 45° - 90 - 45 ° - Automatic saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 3 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1500 x D 900 mm - Weight approx. 300 kg - Discharge roller conveyor with stop by handwheel + digital display 3000 mm - Roller conveyor feed 6000 mm
Manufacturer: Elumatec Model: SBZ 130 Year: 2007 Condition: Used Stock number: 9523 Max. machining length: 6500 mm Spindle drive power: 5.5 kW Maximum spindle speed: 6000 1/min Number of axes: 3 Maximum feed in the X-axis: 34 m/min Maximum feed rate in the Y-axis: 18 m/min Maximum feed rate in the Z-axis: 18 m/min Tool magazine capacity: 8 Machine weight: 5500 kg
For sale is a single-spindle copy milling machine from Elumatec, type AS 70/44, built in 2007. The machine was overhauled in the workshop (almost overhauled). As part of the overhaul, the following new spare parts were installed: - both bearings on the spindle, - both bearings on the engine, - Straps, - all linear bearings (10 pieces), - Gas pressure spring, - Both clamping cylinders including rubber buffers - Copy lever, - Öler (Festo), - Pressure reducers (Festo), - Foot valve with protective tube, - Clamping lever (5 pieces), - Copy scales, - CEE plug, - all hoses and plugs. In addition, the large horizontal and two vertical shafts were re-chromed. Most of the galvanized parts were re-galvanized. All information without guarantee. The price quoted is a VB net price. The machine is sold on account with VAT. Payment can be made in cash on site ...
Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spraying device Milling area: 300 x 120 mm Stroke: 115 mm Weight: approx. 200 kg
Lg.Nr. 26305 Technical data: - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Workpiece width / clamping range W 115 x D 100 mm - Milling area at the top after stop / copy template. W 340 x D 100 mm - Stroke at the top T 110 mm - Milling area at the bottom after stop / copy template. W 240 x 90 mm - Stroke bottom front / rear 95 / 45 mm - Spindle speed 12000 rpm - Dosing spray device - Air consumption per work cycle - without spraying 12 ltr - with spraying 24 ltr - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. W 900 x H 1400 x D 1250 mm - Weight approx. 300 kg
3-sided machining in one clamping Speed: 12,000 revolutions per minute 2 pneumatic copy pins at the bottom, 1 copy pin at the top Pneumatic material clamping Minimum quantity spraying device Milling area vertical (top): 330 x 130 mm Milling area horizontal (from front or rear): 220 x 95 mm Stroke: 110 mm With lateral stops Weight: approx. 350 kg
Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device Roller conveyors and length stops in different lengths on request
Max. saw blade diameter: 500 mm Max. feed length: single 650 mm (3 fold feed possible) Pneumatic material feed Pneumatic saw feed Minimum quantity spraying device Unit counter with automatic switch-off Digital display of feed length Cutting height can be quickly adjusted via 4-stage selector switch Including chip extraction 800 kg
3-axis machining centre for aluminium or PVC profiles for top machining Max. travel X-axis: 2,450 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with 2 USB ports Speed up to 18,000 rpm per min. Minimum quantity spraying device 4 pneumatic material tensioners Light barrier
ELUMATEC SBZ 140 profile machining center was manufactured in 2010 in Germany by elumatec AG. The machine is designed for the economical machining of aluminium profiles and thin-walled steel profiles with a maximum length of 7600 mm. It enables precise milling, drilling and threading of workpieces with high repeatability. With its capabilities, the ELUMATEC SBZ 140 is ideal for use in plants involved in, amongst others, the production of aluminium joinery and steel structures. The SBZ 140 profile machining centre is distinguished by its 4-axis machining unit, equipped with a high-performance, air-cooled milling spindle. It enables all machining operations to be performed at various angles within a range of -90° to +90°. The machining unit cooperates with an 8-position tool magazine, which automatically exchanges tools in accordance with the programmed sequence. The workpiece is held ...
Key data: 380 mm
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Automatic feed via Elgo control 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 m
4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 7,600 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg New Windows PC in 2022 minimum quantity spraying Tensioner detection and automatic displacement 8 pneumatic material clamps Pendulum operation through two light barrier areas Spindle in mint condition (15.5 kN pull-in force) Elusoft dongle for programming on an external PC Loading is included in the price
Key data: 6400 mm, 400 mm, 380 mm
3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 6400 mm Max. travel Y-axis: 400 mm Max. travel Z-axis: 380 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material tensioners Pendulum operation possible Light barriers
Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of angles between 45 and 90 degrees Digital Angle Displays Feed via 2-hand operation Roller conveyors and length stops on request Weight: approx. 1,000 kg
5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 18,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Many tool holders, including angle head and saw blade Saw blade diameter: 500 mm Minimum quantity spraying Autonomous tensioner displacement 20 pneumatic material tensioners Pendulum operation through two light barrier areas Label Printers Barcode scanner Chip conveyor belt Suction Manual control panel Spindle in mint condition (pull-in force is just under 16 kN) Loading is included in the price Weight: approx. 14,000 kg
For aluminium and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. milling height: 150 mm Pneumatic material tensioners Automatic feed Minimum quantity spraying Weight: approx. 200 kg
Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device
Manual length adjustment via hand slider For mounting on any Elumatec single-head saw (right) Max. feed length: 3,000 mm
Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile
Door belt drilling machine for processing aluminium profiles with pneumatic material tensioners and micro spraying device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm Weight: approx. 500 kg
Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake
Saw blade diameter vertical: 550 mm Saw blade diameter horizontal: 500 mm Max. profile height: 250 mm Max. feed: 830 mm Digital angle displays for material stop and tilting of both sawing units Pneumatic material tensioners Minimum quantity spraying device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg
Automatic feed via Elgo control system E 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm
Key data: 3850 mm, 350 mm, 280 mm
3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB ports Speed infinitely variable up to 22,000 rpm Boc Hqjyqyaqoa R H Towi Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 light barrier areas and 2 material stops, thus pendulum operation possible A total of 8 material tensioners Spindle in good condition, spindle pull-in force: 12 kN Weight: approx. 2,000 kg
Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms
Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm
ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably ...
