Bending Machines used for sale (53)

We offer a Schechtl folding machine in top condition with the latest control technology. You will receive an invoice with VAT. Shipping worldwide possible. The price quoted is net.

Working condition unknown. Auction-ID: A3-43535-17110

Schechtl MA 300\1 electronic bending bench with foot pedal and hand depth stop in top condition with two new bending rails with legal warranty. Performance 1.25 mm Steel/ Alu 2 mm Usable length 3 meters Weight 1.5 tons Foot pedal Delivery possible Net price 13900.plus VAT There is an invoice with VAT shown If you have any questions, please contact us at 0160/7838365

Serial number: 223084max. sheet width: approx. 1000 mmwith mechanical hand lever operation Auction-ID: A7-46287-193

Roller bending machine Dimensions: LxWxH 0.9x0.6x1.1 meters / Weight 250Kg

Combined sheet metal processing machine with: - Bending, tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm. - Rolls, roller diameter 42mm - Scissors, max. 1015 x 1mm Material width 1015 mm Material thickness 1 mm Speed by hand Weight 0.25 t Dimensions L x W x H 1.4 x 0.6 x 0.75 m Condition: never used / new (5) Auction-ID: A7-46642-65

Trumpf Servo Amplifier New Part

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-46642-242

Truma Bend V85X 2 meters wide, 2.90 high Year of manufacture 2005 25,000 hours

Flat steel bending machine The following bending tools are included: 1\" - 1 1/4\" - 1 1/2\" - 2\", - 2 1/2\", - 3\" Bending tools diameter 1\" to 3\" mm Wall thickness max. 16 mm Machine weight approx. 26 kg Package size max. 0.6 x 0.3 x 0.3 m Condition: never used / new (5) Auction-ID: A7-46642-171

Material width 150 mm, material thickness 0.5 -3.0 mm Colour: green Total power requirement: 380 V Weight: 350 kg Dimensions: 800 x 1200 x 1350 mm Roller diameter: 24 mm Machine number 700257

Hand bending machine Height 100mm Weight 60 kg Dimensions 0.8 x 0.6 x 0.3 m Auction-ID: A7-46642-49

Workforce: 300 kN/30 t Tool height: 200 mm Stroke length: 0 - 300 mm Bending capacity with prism tool MW 125/240: 200 x 16/200 x 24 mm Bending speed: 0 - 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Footprint: 1250 x 820 x 1120 mm

Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0.025 t Condition: never used / new (5) Auction-ID: A7-46642-191

The all-electric servo bending machine is one of the products with independent intellectual property rights developed by our company. Special high-load screw and guide rail structure, imported bearing installation, high load-bearing capacity, high positioning accuracy, long life, machine tool rigidity, precision retention, and reliability are close to perfection. By introducing advanced design concepts and scientific design methods, the shortcomings that traditional designs cannot avoid have been solved. This bending machine is fast and simple to program, can realize concurrent linkage of multiple axes, fast feed positioning, and significantly improves the efficiency, accuracy and consistency of bending, which is far superior to traditional hydraulic bending machines, and does not require the use of hydraulic oil, is environmentally friendly and pollution-free. Compared with traditional ...

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5) Auction-ID: A7-46642-113

Bending length / working length 2,500 mm Press force / bending force 1,500 kN (≈ 1500 kN) Max. sheet thickness (steel) approx. 2.0 mm Max. sheet thickness (aluminium) approx. 3.0 mm Max. sheet thickness (stainless steel / higher tensile strength) approx. 1.25 mm Max. bending height approx. 300 mm (depending on model) Power / Capacity (Electrical) 24 kW Machine dimensions: 4,050 × 1,600 × 2,400 mm Weight ~ 13,000 kg

Pressure 20 t Stroke 200 mm Table size 550 x 550 mm Working speed: 10 mm/sec. Working height 940 mm Tool height max. 200 mm Total power requirement 2.2 kW Bending capacity 200 x 10 mm Weight 650 kg Dimensions 1.1 x 0.6 x 1.22 m Condition: never used / new (5) Auction-ID: A7-46642-16

TBF controller card Trumpf bending machine suitable for Trumpf bending machine year 1998-2004

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A7-46642-161

DM01 control module for Trumpf Suitable for Trumpf built between 1998 and 2004

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 7300 €: 140.89 €: 10 to: 185 mm: 150x8 mm: 450x900 mm: 150 mm: 60 mm: 10 mm/s: 10 mm/s: 1.1 kW: 915 mm: 900 mm: 450 mm: 1130 mm: 250 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DM05 control module for Trumpf Suitable for Trumpf built between 1998 and 2004

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 12900 €: 247.68 €: 40 to: 285 mm: 200x24 mm: 660x1250 mm: 250 mm: 80 mm: 10 mm/s: 10 mm/s: 4 kW: 930 mm: 1250 mm: 650 mm: 1250 mm: 1100 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trumpf Motherboard Control Board DELEM DA 65/69 SNA 4891 Control Motherboard Board DA 65/69 Trumpf bending machine built 2001-2004 including flat screen and front control panel

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21900 €: 420.48 €: 80 to: 285 mm: 300x25 mm: 750x1425 mm: 300 mm: 105 mm: 10 mm/s: 10 mm/s: 10 kW: 930 mm: 1430 mm: 750 mm: 1450 mm: 1700 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DM02 control module to Trumpf. Suitable for Trumpf built between 1998 and 2004

: neu : ca. 4 Wochen ab Auftragse : Italien : 15330 €: 294.34 €: 22 to: 200 mm: 150 x 10 mm: 1100 x 630 mm: 120 mm: 55 mm: 4,6 - 8 mm/s: 70 mm/s: 45 l: 1.5 kW: 925 mm: 1200 mm: 900 mm: 1050 mm: 630 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety control for Trumpf. Suitable for V50 to V200 without Bendguart.

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. CNC press brake Darley, type EHP 200, built in 1989 Press force: 2000kN Working width: 5200mm Power: 15kW Oil capacity: 160l Weight: approx. 20,000kg Tools & Accessories Included

: neu : ca. 4 Wochen ab Auftragse : Italien : 20960 €: 402.43 €: 40 to: 250 mm: 200 x 20 mm: 1100 x 620 mm: 55 mm: 4,7 - 9,1 mm/s: 45 mm/s: 45 l: 3 kW: 950 mm: 1250 mm: 900 mm: 1000 mm: 750 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 t, 215 mm, 3100 mm

Ref.Nr. 00882 Name of the system: Used press brake Manufacturer: Beyeler Model PR4 1000 KN x 3100mm Year of construction 2000 Machine hours Not visible Power 100 tons Working range 3100mm DNC 80 control system Mains voltage 400V Connected load 5.5kW Machine weight 7000 kg Mains Frequency/Frequez 3~50Hz Max Pre-Fuse 20 AT Max Compressed Air 8Bar Max closing speed mm/s 200mm/s Pressing speed 1-10 Max stroke 215mm Max stop time 110mS Min safety distance 350mm Technical condition Fully functional

: 400 kNstroke length max.: 285 mmworking feed: 9 mm/secreturn speed: 20 mm/sec: 660x1250 mmwork height max.: 930 mmtoolpiece height max.: 250 mmtotal power requirement: 4 kW: 200x26 mmbending capacity max. - round: 60x5,0 mmDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25995 Specifications: - Pressure capacity 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm -Max. Installation depth with straightening beam 1050 mm -Max. Installation depth without straightening beam 1400 mm - Lifting speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. W 3600 x H 1400 x D 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening beam 1300 x 400 mm with over - Threaded spindle laterally adjustable rebearings

pressure: 36.0 tstroke: 250 mmflat steel: 200 x 10 mmworking feed: 6.0 - 24.0 mm/minreturn speed: 60.0 mm/minwork height max.: 900 mmtable:: 580 x 1170 mmtotal power requirement: 4.1 kWmotor: 400 Volt 50 Hzoil volume: 60.0 ltr.weight: 1100 kgrange L-W-H: 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on requestFeatures:- Electro-hydraulic horizontal bending machine- Large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting- Several/various bending tools- Infinitely variable adjustment of bending speed and pressing force- 1x freely movable double foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 50 t, 270 mm, 850 mm

Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D controller. Automatically controlled side stop for convenient machining of your sheet metal parts from single part production to series production.

sheet width: 4200 mmplate thickness: 14 mmpre-bending: 10 mmroll diam. toproll: 340 mmroll diam. bottom roll: 310 mmspeed: - m/minControl: Davi CNC total power requirement: - kWweight of the machine ca.: 11 tdimensions of the machine ca.: 6,5 x 1,75 x 1,65 m- DAVI CNC control- pre-Bending- Hydraulic 4-roller drive- Side roll diameter: 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The HKB series swivel machines are used for bending thin sheet metal. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stopper, these swivel machines are also suitable for the production of small batches. Compact and torsion-resistant Segmented upper tool for many bending options Integrated, manual bend compensation Adjustable angle stop for series production Hands free Foot control of the upper bolster clamp Workspace Working length 1270 mm Sheet thickness (max.) – 400 N/mm² 2 mm Dimensions (length x width x height) 1.6 m x 0.9 m x 1.18 m Weight 330 kg Angle range of the bending beam 135°

pressure: 28 tstroke: 180 mmtable-size: 300 x 550 mmdiameter of piston: 130 mmwork speed: min. 2 m/secwork speed: max. 9,8 m/secreturn speed: 20 mm/secMax. pressure: 200 barweight of the machine ca.: 0,65 ttotal power requirement: 4 kWdimensions of the machine ca.: 1,15 x 0,75 x 1,1 m• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, theTool holder and are installed in the holes and pin holes.• The HB-28 model is used for light bending measurements on the work tableequipped with an angle scale, and the press can also be equipped with toolsare supplied (for example block punching) that are placed on the tool holderCan be assembled, as well as to ...

Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device

pressure: 32 tstroke: 250 mmtable-size: 500 x 760 mmwork height max.: 925 mmbending speed: max. 25 mm/sectank capacity: 80 lPressure power: 320 bartotal power requirement: 5,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,3 x 0,5 x 1,3 mmax.bending height: 200 mmCutting capacity max. (St): 150 x 14Punching capacity max. (St) Ø 35Guide height: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

: max. 16 mmsquare edge steel: 16 mmround bar steel: 16 mmweight: 45 Kg: 180 °dimensions: 0,4 x 0,4 x 1,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale we offer a bending machine. It is a Demonstration machine used for prototypes in our production department. Therefore, a few operating hours of approx. 154.1 Bh technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Fast speed: 150mm/s Return speed (up): 100mm/s Control axis (8 + 1 axis): Z1,Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control - Delem-DA-66T (Multilingual) Operating Instructions: English Number of strokes: 10645 Price net: 35.000â?¬ Visit possible by prior arrangement. If you are interested, please contact us.

: 100 x 5 mmsquare edge steel: 16 x16 mmround bar steel: 18 mmL-beam: 100 x 8 mmdimensions: 400 x 290 x 280 mmweight: 35 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press brake, used Hydraulical press brake, used type / model: D 160-25 Make / make: GWF Year / year of make: 1993 Pressure / force: 160 t Bending length / working length: 3,050 mm Stand width approx. / distance b/n standards: 2.550 mm Table width: 220 mm Stand RADIUS / depth of Cap: 280 mm height / shut height: 440 mm working stroke ca / stroke. Max 250 mm Hubgeschw. / speed of stroke: down: down; 90 mm / s Press down 11 mm / s Expensed. / upward: 90 mm / s Machine weight / weight: approx. 13 t Power consumption / connected load: 22 kW Spec/specif.: 2-hand/foot control / 2 foot switch - manual

: 30 x 8 mmsquare edge steel: 12 mmround bar steel: 15 mmweight: 0,025 t: 51 x 31 x 22 cmdimensions: 135 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

engine: 2,8 KWweight of the machine ca.: 320 kgdimensions of the machine ca.: 86 x 90 x 85 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.