basic foodstuffs and animal feeds machines used for sale (503)

16,000 litre milk tank/ agitator tank / pre-stacking tank Properties: Volume 16000 L Material V2A (AISI 304) 1.4301 Total height 3500 mm Cylinder height 2800 mm Inner diameter 2900 mm Outer diameter 3100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Tank was used for the pre-stage of finished product. Topsoil: Inclined cone base 2 crane eyes CIP Cleaning Vent nozzle Thermometry Tank cylinder: insulated 6 cm Manhole 450 x 350 mm Agitator mixer Stelzer type DRK6P/12 with propeller CIP ball under the agitator Thermometry Level measurement Subsoil: Flat bottom with 3% slope Residual drain pipe with flanges Motor Tank 1/4 - Agitator to the left of Manhole Agitator Mixer Stelzer Type DRK6P/12 No.39139 IP44 Re Art. S1 7.571.5 kW 970/480 rpm 50 Hz 380 V  ...

3,000 litre agitator tank made of V2A Properties: Volume 3000 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 3500 mm Cylinder height 2000 mm Inner diameter 1350 mm Width 1500 mm Number of feet 3 Vertical design Last use of additives Description: Topsoil: Inclined cone base Level measurement Filling line pulled down Thermometry CIP Ball Manhole Ø 450 mm Agitator with propeller Ventilator Ø 350 mm Tank cylinder: CIP ball at the bottom of the agitator propeller Agitator type R132S - 8/4 PRG motor. No. 82/495 Flow breakers around propellers Perforated Pipe Tube Subsoil: forward-drawn residual drain pipe with disc valve Thermometry 3 trumpet feet with dome height adjustable with stiffeners on the legs and bottom

Functioning. The double screw is included. Vemag Robot 500 Filler is a commercial food processor designed for use in restaurants and food service establishments. With variable speed capabilities, this model allows for precise and efficient food preparation. Manufactured by Vemag, a trusted brand in commercial kitchen equipment, this robot filler is engineered to streamline processes and improve productivity in professional kitchen settings. Ideal for businesses looking to enhance their food preparation capabilities, the Vemag Robot 500 Filler offers reliability and performance in a compact design.

Grain sampler type 1938 DRP, 1 litre sampler, in a wooden case Newly calibrated in 2025, valid until 2029! Complete with tripod (lower part), hollow measure, filling tube, knife, flow weight, scale with tripod and weight tray Weight set (3x200g, 100g, 2x50g, 2x20g, 10g, 5g, 2x2g, 1g, 500mg). Good condition, checked and adjusted by a specialist laboratory. Scales and weights are calibrated only according to customer requirements Operating regulations and official boards are enclosed

Hema can closing machine, type: F 60 V, year of construction: 2002, s/s chain belt, total belt width: 70 mm, diameter lids: 85 mm, total dimensions: 2900 mm x 1000 mm x 1800 mm.

Inotec mobile microcutter, type: M75CD-66, machine number: 0201-17500204, year of construction: 2002, 400 V, 3 Ph, 50 Hz, 79 kW, 93 kVA, dimensions: 1450 mm x 1070 mm x 1200 mm.

ATIS GmbH elevating belt with dividers, divider height: 60 mm, distance between dividers: 165 mm, belt width: 400 mm, elevating height: 4100 mm, total dimensions: 5500 mm x 700 mm x 4100 mm.

Boekels metal detector, type: Discovery/C 115x12,5, number: BO-61504115012w-0001, year of construction: 2003, clearance: 1150 mm x 85 mm, belt width: 800 mm, total dimensions: 5000 mm x 1600 mm x 1850 mm.

ATIS GmbH elevating belt with dividers, divider height: 60 mm, distance between dividers: 140 mm, belt width: 600 mm, elevating height: 2600 mm, total dimensions: 3400 mm x 800 mm x 2730 mm.

ATIS GmbH elevating belt with dividers, divider height: 60 mm, distance between dividers: 155 mm, belt width: 495 mm, elevating height: 4200 mm, total dimensions: 3900 mm x 900 mm x 4200 mm.

Dohmeyer/CES spiral cooler/freezer: Year of construction: 2011 (completely overhauled by the company CES in 2017) - 400 V, 36 kW - Refrigerant: CO2 - Cooling capacity: 208 kW/61.17 tons - Maximum production capacity: approximately 1.500 kg/h (depending on the product data) - North-South configuration, counter clockwise rotation - Infeed height: 920 mm, outfeed height: 920 mm - Type of belt: s/s Ashworth belt, type: Omni-Grid 100 B24-12-17, bruto belt width: 600 mm, effective belt width: 550 mm - Maximum product height: 120 mm - 16 tiers per drum, total 32 pieces, effective belt length: 374 m - Drum diameter outside: 2720 per drum - Adjustable band speed: between minimum 3m/min and maximum 7m/min - (6x) Kelvion s/s and aluminium cooling evaporators - (6x) Kelvion s/s and aluminium blast freeze evaporators - S/s switch cabinet with Siemens S7/Simatic touchscreen - Belt cleaning unit - Bitz ...

Trane air-cooled water chiller, model WCC 50. This air-cooled water chiller, which is in very good condition with low operating hours (formerly a rental unit), is equipped with the following main components: - 2 scroll compressors (2 capacity stages) - Plate heat exchanger/cooler with 1 cooling section - Operating hours: approx. 3,000 h - Built-in pump and buffer tank - Cooling capacity: 50 kW/15 tonnes - Number of cooling circuits: 1 - Refrigerant type: R407C - Refrigerant charge per circuit: 18 kg - Nominal voltage: 400 V - Max. current draw: 47 A - Power consumption: 19.6 kW - Dimensions: 3400 mm x 1230 mm x 2400 mm - Weight: 1800 kg The stated cooling capacity of 50 kW is based on a water flow rate of +7°C/+12°C at an ambient temperature of +35°C. Cooling capacity at a water/glycol outlet temperature of -10°C is approx. 25 kW.

Bitzer Kühlmaschinenbau GmbH cooling compressor, type: 6J-22.2Y-40P. - Fluid tank - Oil separator - Pressure gauge set with all necessary safety devices - Fluid filter/dryer with sight glass - Control panel - Cooling capacity: 21.8 kW/6.4 tons - Refrigerant: R507 - Nominal power: 400 V - Power consumption: 13.94 kW The stated cooling capacity of 21.8 kW is based on the refrigerant R507 at -30°C / +40°C. The cooling capacity at -10°C / +40°C is 54 kW.

S/s table with plastic top, dimensions: 1500 mm x 600 mm x 940 mm.

Nuve incubator, model: EN 300, serial number: 04.1273, year of construction: 2020, 230 V, 50/60 Hz, 100 W, volume: 220 liter, maximum temperature: 80 °C, inside dimensions: 280 mm x 220 mm x 300 mm, 2 floors, dimensions floors: (2x) 280 mm x 220 mm, total dimensions: 560 mm x 380 mm x 450 mm.

S/s table, dimensions: 1800 mm x 600 mm x 920 mm.

Office inventory, consisting of: 3 desks, dimensions desks: (3x) 1400 mm x 600 mm x 730 mm, 1 table, 4 cabinets, 3 desk cabinets, 5 chairs, whiteboard and HP printer.

Witeg water bath, model: WB-22, serial number: 1000665193M033, 230 V, 1 Ph, 50/60 Hz, 2 kW, inside dimensions: 500 mm x 290 mm x 100 mm, total dimensions: 540 mm x 330 mm x 260 mm.

Kitchen counter with IKEA refrigerator and IKEA microwave, dimensions counter: 2250 mm x 630 mm x 920 mm, dimensions top cabinets: 2250 mm x 400 mm x 800 mm.

197 plastic Bepco crates, dimensions each crate: 400 mm x 300 mm x 170 mm.

S/s weighing scale with Yaohua indicator, dimensions scale: 1100 mm x 510 mm x 70 mm, model indicator: XK3190-A12+ SS, maximum weight: 300 kg, minimum weight: 2 kg, d=e= 100 gram, dimensions indicator: 260 mm x 160 mm x 140 mm.

2 s/s tables with plastic top, dimensions: (2x) 1500 mm x 600 mm x 930 mm.

Large amount of APV Polimers plastic crates, dimensions each crate: 600 mm x 400 mm x 150 mm.

CAS Corporation weighing scale with label printer, model: CL5200-P, serial number: 020640312, year of construction: 06-2020, 100-240 V, 50/60 Hz, 90 W, maximum weight: 6/15 kg, minimum weight: 40 gram, e=d= 2/5 gram, T= -5.998 kg, scale dimensions: 380 mm x 250 mm, total dimensions: 500 mm x 420 mm x 550 mm.

Mobile elevating belt, s/s frame, s/s belt with dividers, belt width: 1000 mm, divider height: 60 mm, distance between dividers: 320 mm, elevating height: 2850 mm, total dimensions: 4600 mm x 2650 mm x 2920 mm.

Gozlin stunning tong for rabbits with Gozlin QN11 data logger, dimensions tong: 230 mm x 140 mm x 150 mm, dimensions data logger: 410 mm x 180 mm x 500 mm.

Hanging line, s/s frame, 29 s/s hooks, dimensions hooks: (29x) 150 mm x 320 mm, total length hanging line: 12 meter.

Steel 40 feet high cube insulated cooling container, weight: 4580 Kg, dimensions: 12170 mm x 2460 mm x 2880 mm.

SKA silo with passing boot and shutter, volume: 10 m³, diameter silo: 1950 mm, height silo: 6950 mm.

SKA silo with passing boot and shutter, volume: 10 m³, diameter silo: 1950 mm, height silo: 6950 mm.