Manufacturer:
(Category: 709)
Gouda Euroblock Cheese Production Line for Sale due to the installation of a larger cheese production line within the existing cheese factory. The plant was designed for a milk intake capacity of approximately 100.000 litres per day, producing around 10.000 kg of Gouda cheese per day. The line manufactures Gouda cheese in Euroblock format, with dimensions of 500 x 300 x approximately 100 mm and an average weight of 15 kg per block. This corresponds to a daily production of approximately 650 Gouda cheese blocks., The production line consists of the following main components:, - 2 x Closed Cheese Vats with Whey Extraction Sieve., Manufacturer: Tetra Pak Tebel, Type: OST IV, Year: 1991, Capacity: 8,000 litres each, Cheese Vat 1:, Stocknumber: #1005, .hamburg-machinery/listings/4811812-used-cheesevat-tebel-tetra-pak-ost -iv, Cheese Vat 2:, Stocknumber: #1006, .hamburg-machinery/listings/4811 ...
The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...
Incomplete Cream separator (Skimmer). Self cleaning. Machine comes with the frame, bowl, hood, horizontal and vertical axle., Additional features:, Excluding:, - Motor., - Motorcover., - Baseplate and feet, - Waterbox with water valves., - Inlet / outlet pipes., - Control panel., - Service tools for maintenance., Additional with this stocknumber several unused and used spare parts., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Weight: 1.420 kg, Dimensions: 145 x 110 x 175 cm
Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...
IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed ...
Variant 2: Professional advertisement text for RESALE (German) Title: EGLI Stainless Steel Butter Churn / Butter Maker – 2,000L with Integrated Butter Silo Description: For sale is a highly professional industrial butter churn from the Swiss quality manufacturer EGLI with a total volume of 2,000 liters. The stainless steel butter silo integrated directly underneath is fully included in the scope of delivery. The entire facility is in an excellent, fully functional condition (good running condition). Highlights & Technical Equipment: Hygienic design: The entire plant, the silo and the entire associated piping system are made of first-class, food-safe stainless steel. State-of-the-art control: Separate floor-standing control cabinet made of stainless steel. Operation is fully automatic via a Siemens SIMATIC Multi Panel touch display with fully graphical process visualizatio ...
Warming cabinet Rieber Thermoport 3000U, with convection, 30 slide-in rails for 1/1 GN, Connection 230V, year of construction 2006, Dimensions LxWxH approx. 75x50x145cm, weight approx. 64kg, good used condition, works without any problems current new price approx. 3.500,-€ net
Kern GAB 30K5DNM Bench Scale Counting Scale – 30 kg, legal-for-trade (Made in Germany) Description: Sell a robust Kern GAB 30K5DNM bench and counting scale for commercial, warehouse, shipping, production, pharmacy or sales. Brand quality from Kern & Sohn. Ideal for packing, dosing and portioning as well as for counting small parts via the piece counting function. Technical data: Manufacturer: Kern & Sohn Model No.: GAB 30K5DNM Weighing range: 30 kg (dual: 0-15 kg / 5 g, 15-30 kg / 10 g) Legal-for-trade (calibration class III) Piece counting function, tare, weighing with tolerance range Large LCD display Mains and battery operation (battery optional) Condition: as new, hardly used – the original protective film on the weighing plate is still present. Price: 200 € VB plus VAT Pick-up / shipping only by arrangement. The sale is commercial under exclusion of ...
Kern EWJ 6000-1SM Precision Balance – 6000 g / 0.1 g, legal-for-trade (calibrated until 2027) Sell a Kern EWJ 6000-1SM precision balance for laboratory, workshop, pharmacy, manufactory or quality control. High-quality brand scale from Kern & Sohn (Made in Germany). The scale is calibrated, the calibration is still valid until 2027 – a real advantage, as it can be used immediately and the calibration costs are saved. Technical data: Manufacturer: Kern & Sohn Model No.: EWJ 6000-1SM Weighing range: 6000 g Readability: 0.1 g Legal-for-trade, calibrated by 2027 Functions include: counting, percentage weighing, tare Mains and battery operation Condition: good Price: 280 € VB plus VAT Pick-up only The sale is commercial under exclusion of warranty. As this is a used item, it is not possible to return or exchange.
Sell an electric drum roaster made of stainless steel with a capacity of approx. 10 kg. Versatile for roasting nuts, almonds, peanuts, coffee, cocoa beans. Ideal for manufactory, farm shop, confectionery, café or small production. The rotating stainless steel drum ensures even roasting, and the temperature is adjustable via the temperature controller. Easy to operate via on/off switch and temperature control. The device is mobile (on castors) and can therefore be used flexibly. Important: The device requires a high-voltage connection (400 V / three-phase current). Please check before purchasing whether an appropriate connection is available at the installation site. Equipment / Data: Electric drum roaster Connection: High voltage (400 V / three-phase current, CEE plug) Capacity: approx. 10 kg Rotating Stainless Steel Drum Adjustable temperature controller Filling/ ...
Feli NBM-200 Nut Butter Grinder – Stainless Steel, up to 80 kg/h Sell a powerful Feli NBM-200 (Nut Butter Grinder) made of stainless steel for the production of nut butter, spreads and fine grinds. Ideal for manufactory, delicatessen, confectionery, organic shop, café or small food production. The NBM-200 can handle about 80 kg of roasted peanut butter per hour. In addition to peanuts, other nuts, almonds, dried fruits and even vegetables can also be processed into puree and spreads. The puree usually does not get warmer than 30 °C, ideal for gentle processing. The machine is made entirely of stainless steel, weighs approx. 32 kg and is very easy to operate (on/off). Cleaning is straightforward and can be done in about 15 minutes. If nuts get wedged in the funnel, they can be brought back into flow with the enclosed wooden stick. Important note on the application: The gr ...
Stephan UMC 12 Cutter – Complete set with temperature control unit, vacuum pump & water separator, ready for immediate use Key data: Manufacturer: Stephan (A. Stephan u. Söhne GmbH, Hameln) Type: UMC 12 Masch.-Nr.: 719.908.01 Year of Make: 1993 Bowl capacity: 12 litres Motor: 1.5 / 1.9 kW, two speeds 1,400 / 2,800 rpm Connection: 380 V, 50 Hz, IP 54 Made in Germany Description: A fully functional Stephan UMC 12 is offered as a temperature-controlled complete vacuum system for mixing, crushing, emulsifying and thermizing under vacuum. Working under vacuum ensures bubble-free, homogeneous emulsions and creams without air entrapment and protects oxidation-sensitive products – ideal for laboratories, pilot plants, food development as well as cosmetic and pharmaceutical applications. The machine is currently fully operational and can be demonstrated on site. Bowl, lid an ...
, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height: ...
The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors., Additional title: Fan for air exchange, Flow capacity: 20000 m³/h, External compression: 600 Pa Total compression: 734 Pa, Fan revolution: 1160 1/min, Noise level next to the unit: 58 dB(A) in 1 m distance, Power: 5,82 kW (inkl. Frequency converter), Motor 7,5 kW, Current: Motor-electric power 16,01 A, Voltage: Motor-Voltage 3 x 400 V, Frequency: 53 Hz, Length: approx. 4070 mm, Width: approx. 1630 mm, Height: approx. 1810 mm, Weight: 1200 kg, Operation / Control: controlled via wall mounted cabinet with integrated controllers, Material: Stainless steel cabinet, Features: Fan (free spinning wheel), Frequency controller, electrical cabinet, bird protection (780 x 780)
3 cylindroconical fermentation and storage tanks with frame and cone cooling, Additional title: Vertical stainless steel tanks with frame and cone cooling, Total volume: 3000 l, Pressure capacity: 3 bar, Length: 1860 mm, Width: 1860 mm, Height: 3700 mm, Material: stainless steel, Base construction: standing on feet, Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;
3 vertical stainless steel tanks, each capable of being heated with hot water. Previously used as CIP tanks (2 x alkali tanks and 1 x acid tank), Additional title: heatable, vertical stainless steel vessel, Volume appr.: 1000 l, Width: 1 m, Height: 2 m, Weight: 250 kg, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with square tubular feet on spherical caps, Features: Top lid, temperature measurement, equipment for heating with hot water
Cylindro-conical fermentation tank made of austenitic steel., Additional title: vertical, coolable stainless steel tank, Capacity: 6300 l, Max. overpressure: 1 bar, Temperature range: 50 °C, Length: 1700 mm, Height: 4359 mm, Material: stainless steel 1.4571, 1.4404, 1.4301, Position: standing, vertical, Base construction: feet, Features: 2 x jacket cooling, 1 x cone cooling
QTY. 1 SECOND-HAND PASTA / NOODLE PRODUCTION LINE – FOR SHORT AND LONG PASTA Mfct.: Macri (Italy), Braibanti (Italy); Capacity: approx. 260 kg/h; Built: 1990 & 2000, Status: still on foundation, stopped in 2022 General description: The pasta factory currently works with 2 x 160 Kg/h presses, one for long pasta and one for short pasta. The drying capacity of each dryer is +/- 500 kg. To fill them all it takes +/- 15/16 hours, i.e. two work shifts. Required area: 805 sqm., approximately L x W x H = 35 m x 23 m x 7 m
Specifications: Double wall drum with extended drum capacity Adjustable airflow and drum speed on control panel Adjustable flame modulation of gas burner controlled automatically with our roasting profile BESCA software or manual control via touch panel Cast Iron Front Lid Long-lasting, worldwide known and durable components Digital drum speed and exhaust fan speed control 2 thermocouples for bean and exhaust temperature Gas flow control on panel Separate cyclone for effective chaff removal Premix high performance burners Gas safety device and automatic ignition 4 direct drive motors Fast cooling with strong suction fans PC connection Max.Batch Capacity: 5 kg Hourly Output (kg/hour) 20 kg Roasting Time 10-14 min Cooling Time 3-4 min Burner Capacity 28 kW Required Gas Pressure (mbar) 30-50 mbar Power Requirment 1,66 kW Supply Voltage 110/220/380 Fuel Type Propane/L ...
Cooling/Freezing chamber Viessmann -External dimensions: 3600 x 2400 x 2150 mm -Internal dimensions: 3400 x 2200 x 1950 mm -Plate thickness: 100 mm -Door clearance: 800 x 1800 mm -Stainless steel floor -Cooling/Freezing unit in set -Stock status: 1 -The chamber is easy to assemble
360 € 
