subcategories
(3rd category level)
Manufacturer:
(Category: 836)
ATS MS420-S year: 2021 size: 420x210 mm band size: 30 mm in brand new condition
Tecnograf ANT250 year: 2010 minimum size: 210 x 145 mm maximum size: 350 x 420 mm thickness 2.5 to 45 mm speed up to 250 cycles per hour this machine has two glue tanks 1 kettle for hot melt glue 1 kettle for PUR glue and PUR cleaning solution
Laminator - paper overboard Make Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery Delivery on ...
Tränklein FEM joint burning machine year: 1960 working width: 500 mm book thickness: 100 mm temperature regulation
Maximum web width 330mm Minimum web width 180mm Maximum repeat length 24.5" 622.3mm , FBHF 12" 304.8mm Minimum repeat length 2" 50,8mm Top Rewind max diameter 600mm Bottom Rewind max diameter 700mm Web Guide Splice Table Corona Treater 2 FLEXO with UV Drying Screen Lamination Web Turn Bars Die-cutting with GAP MASTER Waste Rewind Tooling
Size: 340 mmEquipments:VIVA 340 No. 85, equipped with:1 paper unwinder (1 m diameter)1 rotary die-cutting unit with magnetic cylinder, 14 Inch format length6 letterpress units with integrated register carriage and magnetic cylinder (14 Inch format length)1 Grated exhaust system (600 mm diameter)1 Winding system (700 mm diameter)1 Longitudinal cutting/trimming unit1 UV flexo coating unit with magnetic plate cylinder7 I.S.T. UV dryers with CMK reflectors and provision for water cooling1 Rotometrics Hydrajack pressure control system for the main die-cutting unit1 BST ProMark video web inspection system (model Euroscope)1 Preparations for COVID-19 treatment1 Plate punching machine1 Plate bending machine
NAGEL Rinak stapler with stand, - electric stapler for comb binding and saddle stitching for brochure production, - Thread binding: up to 4 mm / about 40 sheets (80 g/m² paper), - Saddle binding/Brochures: up to 3 mm / about 30 sheets (80 g/m² paper), - The gantry table can be switched to block- or saddle-clamping by a simple tilt, - Adjustable punch head strike force, - On-table machine for mounting to the tabletop, - Staples: 26/6, 26/8S, Ri 26/6, - Capacity of clamp magazine: 210 pieces, - Insertion depth: 30 mm (for block seal), - Connection: 230 V / 50 Hz, - Weight (net): 7.5 kg, Specifications per manufacturer and without guarantee!
MORGANA FSN ROTARY NUMBERING AND PERFORATING -Year 2001- Suction feed rotary machine -Speed max 9000 sph -Maximum sheet size 460mm x 460mm / 18" x 18" -Minimum sheet size 210mm x 125mm / 8.2" x 4.9" -Maximum paper weight 400 gsm -Minimum paper weight 50 gsm -Dimensions: L 1280mm x W 730mm x H 1115mm / L50.4" x W28.7" x 43.9" -Electrical Requirements: 240v 50hz -Product Weight 138 kg / 308 lb -Many perforators, two numbering heads available , manuals, tools and all accessories -In production, available immediately
Includes 2 tools:, 1 tool with 2 different groove depths, 1 tool with micro-perforation, Working width: 680 mm, Working width: 680mm
Size: 160 x 260 mmTechnical details: Net Weight: 182 Equipments:with a variable head up to 7.5-inch throat depth but with a 6 x 10-inch print areaThis is a Heavy Duty Machine 182 Kg and a good work table size ideal for most small printers or copy shops going into Hot Foil Printing needing a good strong reliable machine.
Built in 1990 4 drilling spindles Adjustable drill spindle spacing Stacking slider left Triggering by microswitch Delivery date: immediately from stock
Year of manufacture 1991 4 drilling spindles with automatic table movement Adjustable drill spindle spacing electr. Footswitch Mobile substructure Delivery date: immediately from stock
Sumbel Machine Package; cleaned and tested; consisting of Sumbel Herold 800 banding machine and Sumbel Regent 800 grating machine. Machine package Sumbel; cleand and checked; gluing machine Sumbel Herold 800 and pressing down machine Sumbel Regent 800.
M. No.: 2584 Equipment / Additional information: Volt: 220 // Hz: 50 WITH PEDAL
max. counting speed sheets: 2000 /minmax. paper size: 50 x 70 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Block size press Müro 5000/A4 WT; cleaned and tested; insertion width 350mm; Insertion height 520mm; 1x dryer. Padding press Müro 5000/A4 WT; cleanded and checked; width 350mm; hight 520mm; one heater.
Rebord (Samed) Darix Evolution Pos semi automatic casemaker year 2017 automatic board feeder Size max. 46 x 90 cm hot melt gluing Weight 1.600 kg good condition
Part No.: 950 024 014-02 // Ser. No.: 706DGY00306 Equipment / Additional information: Media format: max. 330 x 788 mm // min. 210 x 210 Media stack height: 500 mm Throughput: A4: 18 000 sheets/hour (100gsm) Grammage: max. 400 gsm / min. 60 gsm Media thickness: up to 600 microns Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supp ...
Part No.: 950 024 014-02 // Ser. No.: 706DGY00306 Counter: 220,000 sheets Equipment / Additional information: Media format: max. 330 x 788 mm // min. 210 x 210 Media stack height: 500 mm Throughput: A4: 18 000 sheets/hour (100gsm) Grammage: max. 400 gsm / min. 60 gsm Media thickness: up to 600 microns Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. ...
Professional vacuum system for variable printing & personalization / addressing For sale is a powerful and precise vacuum system that has been specially designed for variable data printing, addressing and personalization of print media. The system ensures an absolutely flat and distortion-free fixation of the substrate, thus guaranteeing a perfect print image even at high production speeds. System without pressure system. A new device can also be offered with a built-up printer
Double corner round slotting machine Tränklein EK-D 100; cleaned and tested; 2x Knife 16mm (other sizes on request); Insertion height max.100mm; optical sensor; Foot release. Double corner rounding machine Tränklein EK-D 100; cleaned and checked; 2x knife 16mm (other diameters on request); max.pile hight 100mm; optical sensor; foot switch.
- banding machine - Standard Version - with the existing accessories
Strapping machine - max. Package dimensions: approx. 600 x 600 mm - Speed: approx. 48 strappings / min. - Suitable for PP strap - Width 5-9 mm adjustable - Strap tension adjustable
