xxxxxx

floor-plate length: 5000 mmfloor-plate width: 1800 mmfloor-plate height: 290 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic hammer demolition hammer for excavators from 4to to 9to Manufacturer MUSTANG Model HM300 (Unused) Building YEAR 2021 Serial number AH21XXXX Operating hours 0 Accessories: Chisel Weight 275kg Working pressure 60-80 bar Flow hydraulic oil 40 - 100 liters / min

table length: 400 mmtable width: 400 mmtable load: 120 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed rotary table in very good condition, little used (less than 100 hours)Table diameter 400 mmBosch AC-MotorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

System DELMAG ; Load capacity 0.5 t ; Tare weight 1.45 t ; Tray capacity 2 m³ ; Reach C= 2029 , D= 3220 mm

Can be taken away from our yard for Free., 0 �

Cab for mini excavator approx. 83cm x 100cm with windscreen wiper and opening front Slight paint chipping

Working width 117 cm, rigid, mounting width 190 mm, with VTN 50 bolt mount = Nino de Martis mount = Martin old version mount,

We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.

with complete hold-down device, especially for garbage disposal, with screw-on reversible knife

Concrete pulverizer, concrete tongs, attachment used for excavators. Manufacturer: MUTLEY Type: C116 with quick coupler Total approx. 3000 x 750 x 1300 mm The device comes from a warehouse liquidation and is probably unused. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

1 set of welding hooks, available with Hauer A or Hauer B attachment

SORTING GRAPPLE-ROTAR For excavators 20-30 t Quick coupler SH 48 Year of construction 2016 Little used, very good condition. Price Warehouse Lower Saxony freely loaded!

Working width 40 cm, receiving width 15 cm,

1 used TEKA scraper / Schrappwerk For fully automatic and semi-automatic operation Type: THS 60/20 Incl. control Location: Northern Germany Capacity: 140cbm/h Boom: 20m Scrap bucket: 1300 l Traction rope motor: 45kW Return cable motor: 7.5 / 10 kW Swivel motor: 0.75kW (frequency controlled) Boom adjustable winch: 1.1 kW Operating voltage 400V Control voltage 230 V Frequency 50 Hz At call Price on request

55 cm working width, with teeth

1 used TEKA scraper / Schrappwerk For fully automatic and semi-automatic operation Type: THS 60/20 Incl. control Location: Northern Germany Capacity: 140cbm/h Boom: 20m Scrap bucket: 1300 l Traction rope motor: 45kW Return cable motor: 7.5 / 10 kW Swivel motor: 0.75kW (frequency controlled) Boom adjustable winch: 1.1 kW Operating voltage 400V Control voltage 230 V Frequency 50 Hz At call Price on request

42 cm working width

Hydraulic hammer / hydraulic-Meisel attachment used. For bobcat, mini excavator and small wheel loader with holder on fork carrier. Manufacturer/Type: unknown Holder approx. H-400 mm, W-1114 mm Meisel-A approx. 70 mm Meisel length approx. 400 mm Pressure: 400/850 PSI Total approx. 1160 x 1000 x 800 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Bobcat 114 cm attachment, various Bobcat attachments in stock (Bobcat telehandler; skid steer loader 90 cm and 114 cm)

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

40 cm working width, pick-up width 27 cm

ID3129 MRS 5,5 cbm grapple 5.5 cbm MRS hydraulic grab 5.5 cbm MRS Hydraulic Grapple

NEW, suitable for CAT TH407

Footplates K1 for signs and barges as well as construction fences etc. large remaining stock new available immediately.

30 cm working width

various grippers/pliers in stock (see photos) each with adapter plates

Overall length 110 cm, diameter 13 cm, pointed chisel suitable for hammer HS1500 or HS1600, Year of construction: 1

Snow sign of the company Albert Uenningmann, suitable for cyclists Gehlmax KL 265. 2np70ra It is in very good condition as it was rarely in use. Dimensions: Shield: 150 cm x 60 cm Bracket: 80 cm x 45 cm (trapezoidal)

15 cm working width, pick-up width 19.5 cm