used Ring Bending Machines for sale

I - beam section - flat steel: 80 x 16 (d 1200) mmI-beam section - upend: 50 x 15 (d 1000) mmL-beam: 50 x 5 (d 1200) mmround material: 40,0 (d 800) mmbar material dia. max.: 70 x 2,0 (d 1600 ) mmsquare material: 80x30x3 (d 4000) mmchannels - flange: UNP 80 (d 800 ) mmbending speed: 4,4 m/minroll diam. toproll: 157 mmbore: 50,0 mmtotal power requirement: 1,1 kWweight: 485 kgFurnishing:- electro-hydraulic ring/profile bending machine- Hydraulic lower/side roller adjustment for extra small bending radii- Lower/side roller can be delivered individually- 3x powered rollers- divided roller segments- Digital position display of the bottom/side rollers Display with TouchScree function- hardened tool holder (42CrMo4)- Machine base- 2x manually adjustable side guides- Horizontal and vertical work possible- freely movable control panel- Pressure gauge / pressure indicator for the rollers- CE mark / ...

I-beam section - upend: 80x25 (d 2100) mmbar material dia. max.: 70x2 (d 1600) mmL-beam: 50x50x6 (d 1000) mmsquare material: 60x60x3 (d 4000) mmI - beam section - flat steel: 80x20 (d 1200) mmbar material - diameter: 40,0 (d 800) mmtool taper: 60,0 mmturning speeds: 6,4 m/min.weight: 1080 kgrange L-W-H: 950 x 1400 x 1450 mm only approx. 50 operating hours New price ~ 15.000 eurosFurnishing:- electro-hydraulic ring/profile bending machine- Hydraulic lower/side roller adjustment for extra small bending radii- Lower/side roller can be delivered individually- 3x powered rollers- divided roller segments- digital position indicator- hardened tool holder (42CrMo4)- Machine base- 2x manually adjustable side guides- Horizontal and vertical work possible- freely movable control panel- CE mark / declaration of conformity- User manual in GermanThe data for this ad was created with ModulMWS - the sof ...

I - beam section - flat steel: 80 x 15 mmI-beam section - upend: 50 x 10 mmL-beam: 40 x 5 mmround material: 30,0 (d700) mmtube diameter: 60 x 2 (d1200) mmsquare material: 50 x 30 x 3 mmtotal power requirement: 0,75 kWweight of the machine ca.: 185 kgdimensions of the machine ca.: 670 x 530 x 1350 mm- l-steel flat 80x15 (d700) mm- L-steel upright 50x10 (d800) mm- Angle steel 40x5 (d500) mm- Round material 30.0 (d700) mm- Solid material Ø 35.0 (d700) mm- Pipe diameter max. 60x2.0 (d1200) mm- Square material 50x30x3.0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 80 x 15 (d600) mmI-beam section - upend: 60 x 10 (d800) mmL-beam: 45 x 5 (d600) mmbar material - diameter: 35,0 (d700) mmtube diameter: 60 x 2,0 (d1000) mmsquare material: 45x45x3,0 mmtotal power requirement: 2,25 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 780 x 950 x 1450 mm- higher speed 6.6m/min- l-steel flat 80x15 (d600)mm- l-steel on edge 60x10 (d800) mm- Angle steel 45x5 (d600) mm- Solid material Ø 35.0 (d700) mm- Pipe diameter max. 60x2.0 (d1000) mm- Square material 45x45x3.0 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 80 x 16 (d1200) mmI-beam section - upend: 50 x 15 (d1000) mmL-beam: 50 x 5 (d1200) mmbar material - diameter: 40,0 (d800) mmtube diameter: 70 x 2,0 (d1600) mmsquare material: 80x30x3 (d4000) mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,49 t- Lower roller adjustment, both lower rollers can be adjusted hydraulically- Machine base - horizontal and vertical work use - foot switch/ Control panel - standard rollers (divided) - 2 driven rollers - CE mark /Declaration of Conformity - Operating Instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 120 x 30 (d600) mmI-beam section - upend: 100 x 20 (d2100) mmL-beam: 80x80x8 (d2000) mmbar material - diameter: 60 (d1000) mmtube diameter: 100 x 3 (d3000) mmsquare material: 50x25x2 (d600) mmtotal power requirement: 5,5 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: 1240 x 1375 x 1540 mmFurnishing:- hydraulic roller drive- Planetary gear delivery of the 2 lower rollers- for extra small bending radii- hardened tool holder (42CrMo4)- Standard roller set, hardened- Hydraulically adjustable side straightening rollers- mobile control panel- 3 powered rollers- Digital display- Machine can be used horizontally and vertically- CE mark / declaration of conformity- User manual in GermanSpecial accessories included in the price:- hydraulic side roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

AYEL-TECH RING BENDING MACHINE SINCE TYPE 30 -Shaft diameter 30 mm -Hardened special steel shafts -1 set of hardened rolls -Bottom rollers are driven -Foot pedal -Horizontal and vertical work -Manual -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH RING BENDING MACHINE TYPE DA 30 - Shaft diameter 30 mm - Hooked special steel shafts - 1 set of hooked rollers - Sub-rollers are driven - Foot pedal - Horizontal and vertical working - Instruction manual - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH RING BENDING MACHINE TYPE HPK 50 -Asdiameter 50 mm -Bovenste wals wordt verplaatst hydraulically -Drie roll aangedreven -Digital uitlezing -Horizon eel/verticaal te sump -Voetbediening -Roll Opbergruimte voor -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH RING BENDING MACHINE TYPE PK 35 -Asdiameter 50 mm -Digital uitlezing -Draait right en linksom -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH RING BENDING MACHINE TYPE PK 35 -Asdiameter 50 mm -Draait right en linksom -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH RING BENDING MACHINE TYPE TB 40 -Asdiameter 40 mm -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Standaard stalen roll met 1 set -Met 1 set kunststof voor buis 48.3 mm roll en 10.2 mm -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH RINGBIEGEMASCHINE TYPE TB 40 - Asdiameter 40 mm - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Met 1 set standaard stalen roll - Met 1 set kunststof roll voor buis 30 mm - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

I - beam section - flat steel: 300 x 50 / 1000 mmI-beam section - upend: 150 x 40 / 1500 mmL-beam: 160 x 160 x 19 / 2500 mmroll diameter: bis 500 mmdouble T-iron on the x-axis: 1360/1800 mmU-iron on the x-axis: U 400 mmmin. dia.: 2300 mm: 65 x 10 mmmin. dia.: 2000 mmangular steel - leg inwards: 140 x 15 mmmin. dia.: 1500 mm: 93 x 93 x / 1000 mmroll speed: 4,5 x 9 m/min.0: 400 mmshaft diameter: 120/230 mmtotal power requirement: 22 kWweight of the machine ca.: 13 trange L-W-H: 3 x 2,3 x 2,75 mCondition: ready for operation: Electric 380 Volt: Motorized adjustable rollers: Operation panel: Set of rolls: 2 x Heavy ring and profile bending machine with two driven rollers. Year of construction is 1972, overhauled by the company Herkules / Wetzlar in 2010, motorized adjustment of the central roller. It is now mounted on a base, but can also be embedded in the ground if the foundation is  ...

profile height: 300 mm 3 driven castors Capacity: 27 t Front roller spacing infinitely adjustable with digital display Control can be operated both manually and with PC At the moment without roller sets, as individually adaptable

ISITAN RING BENDING MACHINE TYPE 3R HPK 45 - Asdiameter 45 mm - Bovenste wals wordt hydraulicver - Digital uitlezing - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

KARBEND RING BENDING MACHINE TYPE MB 50 -Asdiameter 50 mm -Draait right en linksom -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Specifications: - 2 mot. driven rollers - manual. Delivery of the top roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 132 mm - Bending performance - Flat steel upright 50 x 10 mm - flat 80 x 15 mm - Square 30 mm - Square tube 50 x 50 mm - Round tube 60 x 1.5 mm - Drive 400 V / 0.6 / 0.8 kW - with: - right / left - run - Standard bending set for flat and angle material - separate control panel - Weight approx. 200 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

Mot. - Ring - Bow - Bending machine Offer number: 15252 Make: KNUTH Type: MSB 30 Machine No: 121217 Built: 2000 Technical data: - horizontal working position - 2 mot. driven rollers - manual vertical delivery of the upper roller - Lifting top roller up to 30 mm - Shaft diameter 40 mm - Wave length 35 mm - Wave rotation 12 rpm - Roll diameter 76 - 88 mm - Drive 400 V 1.1 kW - Bending power approx. - Round tube 30 x 1.5 mm - Flat steel 30 x 10 mm - E - foot button for right / left - run - Round tube roller set approx. 23 mm - Weight approx. 150 kg - Space requirement approx. W 700 x H 1150 x D 650 mm

The machine operates according to the thornless counter-pressure bending principle. max. bending performance for steel pipes D 60 x 2 mm, theoretical stroke number for single sheets 90° bending angle 1000 pcs/h, Connection value 24 kW, Dimensions: LxWxH = 2750x1550x1550 mm, Weight: 3000 kg

OMAHA RING BENDING MACHINE TYPE MB 50 -Asdiameter 50 mm -Draait right en linksom -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE TYPE OPK-105 -Shaft diameter 100 mm -Hydraulic -Hardened special steel shafts -1 set of hardened rolls -All three rolls are driven -Two digital displays -Foot pedal -Horizontal and vertical work -Manual -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE OPK-125 TYPE -Shaft diameter 120 mm -Hydraulic -Hardened special steel shafts -1 set of hardened rolls -All three rolls are driven -Two digital displays -Foot pedal -Horizontal and vertical work -Manual -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE TYPE OPK-32 -Shaft diameter 30 mm -Hardened special steel shafts -1 set of hardened rolls -Bottom rollers are driven -Foot pedal -Horizontal and vertical work -Manual -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE TYPE OPK-42 -Asdiameter 50 mm -Draait right en linksom -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTA RING BENDING MACHINE TYPE OPK-42 - Asdiameter 50 mm - Digital uitlezing - Draait right-hand-leftom - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Documentatie - 400V Sqxz3tq7 DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE TYPE OPK-45 -Asdiameter 50 mm -Bovenste wals wordt verplaatst hydraulically -Digital uitlezing -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE TYPE OPK-65 -Asdiameter 60 mm -What twee walsen has been hydraulically verplaatst -Drie roll aangedreven -Uitlezingen 2 digital -Remmotor -Horizon eel/verticaal te sump -Verrijdbare technologies -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS RING BENDING MACHINE TYPE OPK-105 -Shaft diameter 100 mm -Hydraulic -Hardened special steel shafts -1 set of hardened rolls -All three rolls are driven -Two digital displays -Foot pedal -Horizontal and vertical work -Manual -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAHINLER RING BENDING MACHINE TYPE 3R HPK 45 -Asdiameter 45mm -Bovenste wals wordt verplaatst hydraulically -Horizon eel/verticaal te sump -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAHINLER RING BENDING MACHINE TYPE HPK 50 - Asdiameter 50 mm - Bovenste wals wordt hydraulicver - Drie roll aangedreven - Digital uitlezing - Horizontaal/verticaal te gebruiken - Voetbediening - Opbergruimte voor roll - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

SAHINLER RING BENDING MACHINE TYPE HPK 60 - Asdiameter 60 mm - Bovenste wals wordt hydraulicver - Drie roll aangedreven - Digital uitlezing - Horizontaal/verticaal te gebruiken - Voetbediening - Opbergruimte voor roll - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Hydraulic roller adjustment left and right with digital displays Hydraulic adjustment of the support rollers left and right Diameter of standard bending rollers: 380 mm Variety of accessories Machine can be used horizontally or vertically Machine weight: approx. 4800 kg

I - beam section - flat steel: 140 x 140 x 13 mmI-beam section - upend: 120 x 120 x 13 mmL-beam: 130 x 130 x 12 mmround bar steel: 85 mmbending capacity - flat iron: 125 25 mmflat steel: 65 x 65 mmincluding various rollersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23164 - 3 mot. driven rollers -one. Infeed of the two lower rollers - Shaft diameter 50 mm - Useful length of the standard shafts 95 mm - Shaft rotation 8 m/min - Roll diameter top / bottom 180 - 200 mm - Bending performance - flat bar highk. R 200 50 x 10 mm - Square R 200 30 mm - Round tube R 500 48.3 x 2.9 mm - Angle bar R 550 60 x 5 mm - Drive 400 V / 3 kW - with: - E – foot switch for right / left – barrel - Bending kit for flat and angle material - Pipe roller sets steel approx. 28 , 33 , 42 , 48 , 60 mm - Weight approx. 650 kg - Space requirement approx. W 750 x H 1500 x D 1150 mm

Bar twisting machine Offer number: 05354 Make: THOMAN Type: ME 122 Machine No. Xxxx Built: 1978 Technical data: - Bending process by hand crank - Bending performance square iron ST 37 to approx. 22 mm - Bend length between adjustable to 1350 mm in the veracity units - Space requirement approx. W 1750 x H 1100 x D 500 mm - Weight approx. 200 kg

- Pipe diameter 6 - 28 mm - Wall thickness max. 2 mm - Bending radius 2 x D - Bending angle max. 190 - without tools

TUGRA RING BENDING MACHINE TYPE HPK 41 - Asdiameter 40 mm - Bovenste wals wordt hydraulicver - Digital uitlezing - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

TUGRA RING BENDING MACHINE TYPE PK 20 - Asdiameter 20 mm - Draait right-en leftom - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Infeed range: 90 mm Motor power: 0.7 / 0.85 kW Connection: 400 V Dimensions (WxDxH), approx.: 1040 x 540 x 1520 mm Equipment: - Foot control - Various additional rollers made of plastic and metal -CE