extruders used for sale

Inv. Num. : 7752 Type: BEX 1-75-30B Producer: Battenfeld Created: 2007 Parameters: Screw diameter: 75 mm Output capacity: 400 kg/h Weight: 3400 kg Equipment: Tow Strap

cutting diameter: 280 mmcapacity 90 degrees: flat: 380 x 260 mmcapacity 90 degrees: square: 260 x 260 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7235 Type: 6.5 Producer: Weber Generated: Parameters: Equipment: Calibration table ? Tow strap

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

turning dia. over bed: 3.520 mmturning diameter over slide: 3.000 mmturning diameter over slide: 2.440 mmturning length: 15.000 mmControl: Sinumerik 840 D SL turning speeds: 50 U/minworkpiece weight max.: 80.000 kgturning diameter: orig. 3500 / mod. 2400 mmaccuracy +/-: 0,01 °total power requirement: 110 kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 m- The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system.- In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to bereworked.Thus, the entire bearing arrangement was modified and optimally adjusted.- In addition, control and safety-related points had to be modified.- Geometric acceptance report- Temp ...

Key data: 45

Extrusion line for 3D monofilament composed of: - Extruder 1 spindle, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With drying hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretch: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large reel unwinder and double rewinder for small reels. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

turning diameter over bed: 630 mmturning diameter over slide: 370 mmcontrol: SIEMENS 810 Dcentre distance: 2000 mmturning speeds: 2500 U/minNumber of spindles: 2 St.spindle cone: 115 mmspindle bore: 105 mmfeed: 5 - 3200 mm/minx-travel: 350 mmspindle taper: Camlock Din 55029-8 total power requirement: 18,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 2,7 x 2,23 mThe machine was in operation until the end and is fully functional.There is no chuck on the machine and no accessories are available.A three-jaw lathe chuck DIN 55029 Ø 315 mm is required.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 Screw Extruder for Sale Brand: Maquiplast Diameter: 80 mm Ø L/D ratio: 20 L/D Engine: 30 kW (40 hp) Variable Speed Drive: Delta For more details or to make an enquiry, please contact us.

x-axis: 700 mmy-axis: 1.000 mmz-axis: 500 mmmax. table load: 900 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3D coordinate measuring machine- PC with software, various probes- Renishaw PH10MQSoftware: PC-DMIS Pro 3.7 Maintenance Release 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PVC sheet extrusion line with head: 280mm, composed of: - 2-screw extruder, brand: Weber, model: DS.8.22, motor: 30 Kw (40 hp), load doser, degasser with vacuum pump. Variable speed drive and electrical panel. - Wide blade head: 280 mm. - Calender, width: 300 mm, diameter: 150 mm. 3 water-cooled rollers. With stretching. - Ink baths, dryer, stretch for several coats of paint. - Cutting shear. - 1-reel winder, width: 300 mm. - Various replacement rollers for ironboards, printers and engravings (drawings on foil). Ahem: Wood simulation. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extrusion line for 3D monofilament composed of: - 1-spindle extruder, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With dryer hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretching: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large coil unwinder and double rewinder for small coils. - Dehumidifier Brand: Puchades, power: 6.7 KW (9.1 hp), 14 Amp, year: 2014.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PET Sheet Extrusion Line Composed of: - Extruder 1 screw, brand: Union, 120 mm, motor: 185 KW (250 hp) double desasifier, year: 2002. - Continuous flow gear pump. - Self-cleaning hydraulic filter changer, brand: Erema, model: SW4/170 RTF. - New replacement spindle. - Head: 1400 mm, brand: EDI. - Calender: 1600 mm wide with 450x600-500 rollers. - 500 mm replacement cylinder - Silicone bath, year: 2017. -Winders. - Working width: 1200 mm. - Thicknesses: 0.2 to 1.2 - Production: 500 Kg/h. - Co-extruder 1 spindle, 80 mm, brand: PTI. -Dehumidifier, brand: Piovan, model: DP-620, year: 2022.

x-travel: 1600 y-travel: 1300 mmz-travel: 1450 mmControl: Siemens 840C Tool changer: 100pos number of spindle speeds: 10-4000U/min tool taper: Iso50 A-axis: -100°/+10° c-axis: 360.000° 0total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extruder 2 screws : 100 mm Ø 15 L/D Brand: Mapre Model: E 2.66.100 Series No. 155 Engine: 30 KW (40 hp) Parallel spindles forced feeder CM 80 headcutter system with geared motor type F 30 AG 19 123752, no. 1910072-249, brand PIV Antrieb W. Reiner K.G. 2.2 KW (3 hp) Electrical control panel equipped with electronic frequency inverter and electrical temperature control panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

x-travel: 3000 mmy-travel: 2500 mmz-travel: 1000 mmControl: Siemens type: 840 DFeed: 5-30.000 mm/minTable area: 2000x2170 mmtable load: 1500 Kg/m²T-slots: 22 H9distance between uprigths: 2500 mmspindle turning speed range: 6000 U/minspindle drive: 36 kWspindle taper: HSK 100Tool changer: 30 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 8x6,4x4,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40

2 Screw Extruder Co-rotating spindles 40 mm Ø diam, 44 L/D, Brand: Maris Model: TM40 MPL/D44 Variable motor: 75 Kw (100 hp) Year: 2000. 2 x 70% replacement spindles.

engine output: 375 kWcubic capacity: 12809 ccmdriven kilometers: 225000 kmallowable maximum weight: 18/56 Tgear box: automatic size of tire: 385/65R22,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

weight: . kgtaper MK: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 60

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

filtration performance: . l/minfleece width: . mmtemperature: . °CThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80

Extruder 1 spindle Brand: Bandera, 80 Ø diám 25L/D, with two speeds, alternating current motor: 55 kw (75 hp) with variable speed drive. Two replacement spindles, one for rigid PVC and one for plasticized PVC. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

feed pressure: . barcoolant capacity: . lExpansion Range: . mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 65

Extruder 1 Screw 65 Ø diam, 30 L/D Brand: Flag engine: 30 KW (40 hp). With electrical panel. Reference: GT-4706

weight max.: 20 taxial load -forward: 9 taxis load in the back: 9 tBrake system: size of tire: 550/45-22,5 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.