max. format 36 x 36 cm Year of construction 2010 Banding device Computer control with monitor US 2000 Corner Slider CL Banding Station for paper and foil tapes max. stacking height 30 cm Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
Key data: 125 t
Machine Vise ATS-125 Jaw width: 125 mm Jaw height: 46 mm Total height: 118 mm Spans: Pos. 1: 0-72 Pos. 2: 70-140 Pos. 3: 135-220 Clamping force : 35kN Weight: 34 kg Mint condition, unused Delivery possible
Key data: 160 t
Machine vise ATS NC-160VH Year of construction 2025 Jaw width: 160 mm Jaw height: 58 mm Overall height: 163 mm Total length: 650 mm Max. internal wingspan: 300 mm Max. wingspan outside:480 mm with pull-down function Clamping force: 40kN Weight 60 kg Delivery possible
Key data: 200 t
Machine vise ATS NC-200VH Jaw width: 200 mm Jaw height: 63 mm Total height: 173 mm Total length: 700 mm Max. internal wingspan: 330 mm Max. wingspan outside:540 mm with pull-down function Clamping force: 45kN Weight: 80 kg Mint condition, unused Price per piece
Key data: 130 t
Machine vise ATS NC-130VH Jaw width: 130 mm Jaw height: 55 mm Max. internal wingspan: 220 mm Max. wingspan outside: 380 mm with pull-down function Clamping force : 35kN Weight: 40 kg Delivery possible
used
Ats US 2000 AB banderolie
Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked; frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.
Banding maretial PW8030150 white paper 40 rolls and PB7030150 brown paper 40 rolls. Banding maretial PW8030150 paper white 40 rolls and PB7030150 paper bouwn 40 rolls.
- Ultra-Sonic banding machine - Standard with the existing accessories
Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Meter reading 253,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 253,000.
; ready for operation
Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck
Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece
Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck
Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece
Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use
Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use
Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"
Auction-ID: A1-38468
; Gross weight [kg]: 85
; Gross weight [kg]: 90
; Gross weight [kg]: 35
; Gross weight [kg]: 50
; Gross weight [kg]: 180
; Gross weight [kg]: 180
; Gross weight [kg]: 311
; Gross weight [kg]: 215
; Gross weight [kg]: 330
Altmann Graphische Maschinen GmbH
1.500 € 
