Mini excavator Luca 1000 gasoline engine, tank dirty, 30 cm bucket, new excavator, hour meter shows 350 bst ( battery hours) Battery defective / Color red1200x800x2300 mm1250 kguncheckedloaded on truck

Mini excavator MP15 new / gasoline engine, full cab, light defective, 30cm bucket / Color yellow1200x800x2300 mm1200 kguncheckedloaded on truck

Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation.

With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.

Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.

Load capacity: 227kg, max. tilt angle: 3.5°, max. wind speed: 9.4m/s, platform height: 5800mm, operating pressure: 207bar, max. tire load: 570kg, weight: 1312kg. The battery is defective and the machine cannot be moved for long. Replacing the battery will probably solve the problem. Documentation available.

Power: 403kW, max. drilling depth: 108m, max. drilling diameter: 311mm, chassis: crawler chassis, dimensions X/Y/Z: approx. 10500mm/2500mm/3800, weight: approx. 31000kg, operating hours: 12300h. Including 36m drill pipe on the boom (without drill bit) and new 72m drill pipe as replacement. Compressor must be checked. On-site inspection is possible.

Internal dimensions X/Y/Z: 5200mm/2300mm/2300mm, floor: multiplex board 2x18mm, walls: sandwich 40mm, wheels: 195/50R13C, axles: 2x1350kg/braked, refrigerator, WC, 3x radiators, approval: 100km/h. Documentation available. On-site inspection is possible.

Max. working height: 25.91m, max. platform height: 25.91m, max. horizontal reach: 23.32m, ground reach: 2.64m, platform capacity on/unrestricted: 300kg/454kg, platform capacity: 2 persons, max. lateral force: 400N, max. inclination: 2.5°/4.5°, max. wind speed: 12.5m/s, gradeability: 45%, rated power: 74hp. Dimensions X/Y/Z: approx. 2.5m/12.4m/2.8m, weight: approx. 17000kg.

Working height: 10m, platform height: 8m, horizontal reach: 3m, platform load capacity: 200kg, platform dimensions X/Y: 780mm/980mm, turning circle: 1880mm, wheelbase: 1200m, ground clearance: 100mm. Extension swivel range: -60°/+70°, hydraulic system capacity: 7l, climbing ability: 23%, drive speed: 5km/h, turntable rotation: 345°, tilt alarm: 3°, maximum permissible manual force/wind speed: 400N(40kg)/12.5m/s(45km/h). Dimensions X/Y/Z (folded): Approx. 2700mm/1000mm/2000mm, Weight: approx. 2800kg. Documentation available. One defect is present (in need of repair).

A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible.

Two Manitou work platforms are available. 1) Manitou 120 AETJC 2 3D aerial work platform, year of manufacture: 2022, basic load capacity: 200kg, working height: 11.95m, max. outreach: 7m, drive: electric, weight: approx. 6550kg. 2) Manitou MA 120 AETJC 2 articulated work platform, year of manufacture: 2022, basic load capacity: 200kg, working height: 11.95m, max. outreach: 7m, drive: electric, weight: approx. 6550kg. Documentation available. On-site inspection is possible.

Conveying speed: 30m/min, load capacity lift: 500kg, max. total mass of car and payload: 1.6t, control: Steinweg LIFTOMATIK, connected load: 3.7kW. Machine dimensions X/Y/Z: approx. 1600mm/1400mm/1800mm, weight: approx. 750kg. The machines safety brake must be replaced due to UVV. Documentation available. On-site inspection is possible.

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

Power: 126kW, backhoe bucket capacity: 1.7m³, reach: 9760mm, track width: 600mm, breakout force: 236kN, displacement: 7200cm³, undercarriage: NLC, boom: monoblock, digging depth: 6570mm, torque: 1800rpm. Transport dimensions X/Y/Z: approx. 10350mm/3000mm/3300mm, weight: approx. 25500kg, operating hours: 20159h. Documentation available. On-site inspection is possible.

Power: 257kW, displacement: 12700cm³, torque: 1400rpm, bucket capacity: 4.5m³, max. dumping height: 3115mm, backhoe capacity: 4.5m³, outside turning radius: 7205mm, engine type: DC 13, tires: 26.5 R25 (L3), fuel: diesel. Transport dimensions X/Y/Z: approx. 9350mm/3300mm/3600mm, machine weight: approx. 26000kg, operating hours: 6228h. Documentation available. On-site inspection is possible.

Engine type: ZX250LCN-3, power: 132kW, fuel: diesel, max. digging depth: 6960mm, cubic capacity: 5193cm³, backhoe capacity: 1.65m³, track width: 600mm, undercarriage: NLC, boom: monoblock. Transport dimensions X/Y/Z: approx. 10300mm/3050mm/3000mm, weight: approx. 25000kg, operating hours: 16645, documentation available. On-site inspection is possible.

Engine type: CAT 322 BLN, power: 114kW, fuel: diesel, max. digging depth: 2500mm, cubic capacity: 7200cm³, backhoe capacity: 1.4m³, track width: 600mm, backhoe width: 1350mm, max. reach: 9435mm, speed at max. torque: 1800rpm, boom: monobloc. Transport dimensions X/Y/Z: approx. 10500mm/3000mm/3200mm, weight: approx. 25000kg, operating hours: 16883h. Documentation available. On-site inspection possible.

A scissor lift from an unknown manufacturer is available. Lifting height: 8140mm, working height: 10000mm, machine dimensions X/Y/Z: approx. 2350mm/1200mm/2300mm, weight: approx. 2250kg. The battery of the machine must be deep-charged. Documentation available. On-site inspection is possible.

A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.

fabric-no.: 332620237 : Motor Schaden : Ja serial number: 332620237 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lot consisting of hydraulic hammer for jpc excavators + 200 bucket + 800 bucket1200 x 800 x 500 mm100 kguncheckedloaded on truck

Kit consisting of 2 buckets for excavators, 200 mm digging bucket + 800 mm leveling bucket, attachment for all JPC excavators from mod ht12 up to mod ht251200 x 800 x 500 mm20 kguncheckedloaded on truck

Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)1200 x 3000 x 2500 mm1100 kguncheckedloaded on truck

Mini crawler excavator, complete with digging bucket, electronic ignition, two-cylinder engine, rubber tracks, 360 degree continuous rotation fifth wheel, movement control with joystick attachment and hammer control, operating weight max 1500 kg. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)2700 x 1000 x 2400 mm1000 kguncheckedloaded on truck

Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger.2700 x 900 x 1600 mm1000 kguncheckedloaded on truck

Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)1200 x 3000 x 2500 mm1100 kguncheckedloaded on truck

Trailer complete with excavator Trailer 4 tires for transporting excavators, total mass 1130 kg, leaf spring suspension, 4 tires 165/70/13, quick coupling hook, packed in its original packaging , not registered for road use, JPC ht 12 excavator year 2022 koop engine electronic ignition, 360 degree turntable rotation, hydraulic attachment for hammer and accessories The color of the excavator may vary depending on availability (yellow, red, other) Trailer: withouth license plate no., NO REGISTRATION and NOT EECC REGISTRABLE (no VIN number)3300 x 1600 x 2700 mm1200 kguncheckedloaded on truck

JPC HT 18 mini excavator, equipped with twin-cylinder diesel engine, joystick and electric controls, swinging arm, extendable undercarriage, hydraulic system for hammer, never used, 0 hours The color of the excavator may vary depending on availability (yellow, red, other)2700 x 1100 x 2600 mm1650 kguncheckedloaded on truck