presses: flexo and rotogravure used for sale (148)

NILPETER FA 4250 Year: 2007 Working width: 420 mm Number of units - 8 8 UV colour stations + hot air drying on 8 station Installed new UV drying system – GEW E2C (year 2020) Servo driven Water cooling-chill rollers Printing cylinders and anilox in sleeve version Unwinding (roll max. 1000 mm) Roll splicing table Corona Lengthwise waste cutting with waste removal Table for roll-sheet cutting Software for cold foil printing Winding with pressure roller (roll max. 1000mm) Video monitoring camera Printing film 25-300 my Automatic register Included 10 anilox rollers Included 8 sleeve print cylinder (552,45mm)

Flexo printing machine BOBST M6 + Milltex cutting machine Substrate width: 670 mm Print width: 660 mm Maximum speed: 200 m/min Monomatic Unwinder DZ15.67TB with Automatic Splicer Vario™ servo drive for inlet and outlet Kelva web cleaner Wet lamination in the printing unit Corona Treater – Vetaphone 13 flexographic printing units V-Flower Flexo Printheads in Sleeve Solution Drying system with 2 drying hoods – total drying length: 4.4 m GEW E2C HP 180 W/cm² UV Drying Lamps Two rail turning strips Lamination and cold foil stamping AVT Helios S Turbo HD System 2 barcode verification modules Laboratory color measurement with Delta E BST Powerscope Camera Web decrimping device 2 perstatic pumps for flexographic printing units 13 pressure sleeves 13 anilox rollers up to 550 lines/cm Milltex Sincroflex sheeting machine, built in 2020 Sheet cutting machine for paper ...

Gallus KMS 510 Unwind, E+L Web Guide, Teknek Web Cleaner, Arcotec Corona Treater, Infeed Tension Unit, 9 x Servo Flexo Units, Multi stream hot foil unit, Turning Tower Lamination Unit, GEW UV System, Chill Rolls, Waste matrix tower Rotary die cutting/embossing unit Register Control, Sensotec Web Inspection System AVT Video Control BST Chiller HYFRA Print cylinder 116 Anilox 29 Gallus FSM 510, 20" Flatbed Diecutters Web decurling unit two decurlers, one on the press and one on the die cutter Windowing/Stripping unit Belt delivery unit many accessories

BHS F400-3FUV Method type: Printing Machine Type – Main Function: Flexographic Printing Year: 1998 Pressure units: 3 Extended dryer capacity: 3 Back Printing: No Input Coil Diameter (mm): 800 Output Coil Diameter (mm): 600 Minimum Film Width (mm): 200 Maximum Film Width (mm): 400 Minimum thickness (μm): 20 Maximum thickness (μm): 100 Maximum speed (m/min): 150 Average speed (m/min): 105

Reference ID: PP-55532 Category: Label Printer Manufacturer: Nilpeter Model: FA 4250 Year Built: 2007 Color: 8 Impression: - Working Hours: - Speed: - Max. Size: 420 mm Min. Size: - Condition: Good Location: Europe Availability: Immediately Machine Description: Working width: 420 mm Number of units: 8 8 UV colour stations + hot air drying on 8th station Installed new UV drying system – GEW E2C (year 2020) Servo driven Water cooling chill rollers Printing cylinders and anilox in sleeve version Unwinding (roll max. 1000 mm) Roll splicing table Corona Lengthwise waste cutting with waste removal Table for roll-sheet cutting Software for cold foil printing Winding with pressure roller (roll max. 1000 mm) Video monitoring camera Printing film 25–300 my Automatic register Included 10 anilox rollers Included 8 sleeve print cylinders (552.45 mm) Machine in  ...

Flexographic printing machine Type Soloflex ,  6 Colors Material width max. 650 mm  Max. speed 200 m/min, Repeat 300-600 mm, Unwinder max diameter = 600 mm, Rewinder (turnstile) max diameter = 600 mm, Heating electric, Web edge control  Corona Camera, Assembly device. 

Gallus EMS 410, 2008 Unwinder with roller lift Web guide Web cleaner Corona Servo control 8 flexographic printing units 8 cooling rollers 8 UV drying units Cold foils Delam-Relam 2 rotary die-cutting units Register control Video control Rewinder 10 Anilox 15 magnetic cylinders 64 printing cylinders

Reference ID PP-55982 Category: Rotary Die Cutter (RDC) Manufacturer Martin Model DRO 1628 Year Built 1998 Color 3 Max. size 2800 × 1600 mm Condition Good Location Europe Availability Immediately Machine Description Martin Prefeeder Vacuum feeder 3 Colours Rotary DieCutter (RDC) Waste elimination Stacker The first flexo is rubber roll, the other two are chamber system Ceramic roller data (table): Columns: Dro | Lc | Cm2 Nyomda 1 | 100 | 8.00 Nyomda 2 | 100 | 10.26 Nyomda 3 | 100 | 7.26

Reference ID: PP-55532 Category: Label Printer Manufacturer: Nilpeter Model: FA 4250 Year Built: 2007 Colors: 8 Max. Size: 420 mm Condition: Good Location: Europe Availability: Immediately Machine Description • Working width: 420 mm • Number of units: 8 • 8 UV colour stations + hot air drying on 8th station • Installed new UV drying system: GEW E2C (year 2020) • Servo driven • Water cooling / chill rollers • Printing cylinders and anilox in sleeve version • Unwinding (max. roll diameter: 1000 mm) Equipment / Options • Roll splicing table • Corona • Lengthwise waste cutting with waste removal • Table for roll-sheet cutting • Software for cold foil printing • Winding with pressure roller (max. roll diameter: 1000 mm) • Video monitoring camera • Printing film: 25–300 my • Automatic register • Included: 10 anilox rollers  ...

Aquaflex Model LXP 1656 4 colors Print width 420 mm Year 1995 1 single-sided cutting station 3 watermark printing stations 1 UV printing station 1 weeding station 1 hot or cold air cooler Accessories: Cylinder 1 pc 93 1 pc 97 1 pc 101 1 pc 103 1 pc 104 1 pc 105 1 pc 115 1 pc 130 1 pc 135 Length: 7800 mm Width: 3600 mm Height: 2900 mm

Qty. 1 Second-hand 8 Colour Gear Machine Mfc.: Comiflex Vale 1208 Type: 8 Colour Gear Machine Built: 2011 The Printer is in immaculate showroom condition and has been serviced only by the manufacturer. Fully Automatic (Gearless), with the following technology: Ink Pump – Phonematic with Autowash Camera System – FIFE Kindly refer to the machine specifications below: Material width – 1280 mm Print width – 1200 mm Minimum repeat length – 380 mm Maximum repeat length – 840 mm Machine speed – 300 m/min. 8 Aniloxes: Face Length – 1260 mm Engrave Length – 1240 mm OD – 171.88 mm ID – 149.722 mm 8 sleeves: ID – 114.708 mm Face Length – 1210 mm

Qty. 1 Second-hand CI Flexo Printing Machine Brand & Model: Carint Geared/gearless: Geared Built: 2000 No. of colours: 6 colours (6+0) Material to print: PE, PP, OPP, PET, Paper Printing width: 1250 mm Material width: 1280 mm Print repeat: 360 mm – 1040 mm Mechanical speed: Up to 300 m/min Un-winder and winder: Un-winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Pumps: 6 x pcs, Pneumatic pumps Drying system: Electrical drying

Flexographic printing press: Arsoma EM410 Year : 1993 Machine number: 410 6 printing units: 5 solvent + 1 UV 1x turning unit 1x auxiliary motor for the main press 1x Rewinder 1x die-cutting unit 1x Cutting Unit Printing cylinder + anilox coating + documentation

UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.

Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm Air core diameter 76,510 mm Repeat steel lock 310 mm Max. print length 600 mm Printing length setting In steps of 0.1 mm; set print length max. correction +/- 2 % Anilox cylinder Inner diameter 105,158 mm Perimeter 400 mm Sleeve length 900 mm Max. mechanical speed of the machine 300 m/min Operational printing speed of the machine It depends on the type and quality of the printed material, printing inks, ink transfer, printing length, printing plates, type of the printed motive: cross lines - picture screen density, capacity of anilox cylinders, reprint of inks, varnish, etc., environment temperature and doctor blade type. OPERATION EFFICIENCY Max. mechanic speed 300 m/min FALCON - automatic setting of print registers and impressions Soph ...

Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: steps of 0.1 mm; correction ±2% Anilox roller internal diameter: 136,989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Corona treatment unit (Ahlbrandt) Drying Gas Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems  ...

Reference ID: PP-55241 Category: CI Flexo Printer Manufacturer: Fischer & Krecke Model: Flexpress 16S-10k Year Built: 2005 Number of Colors: 10 Working Hours: – Max. Mechanical Speed: 400 m/min Max. Printing Width: 1050 mm Condition: Good Location: Europe Availability: Immediately ________________________________________ Machine Description CI Flexo Printing Press • Geared/Gearless: Gearless • Substrates: PE, PP, OPP, PET, Paper • Printing Width: 1050 mm • Material Width: 1100 mm • Print Repeat: 350 mm – 750 mm • Mechanical Speed: Up to 400 m/min ________________________________________ Unwinder • Turret unwinder – non-stop • Max. roll diameter: 1000 mm • Expanding Shafts: 3", 5" Winder • Double unwinding shaft with dancing rollers • Max. roll diameter: 1000 mm • Expanding Shafts: 3", 5" ________________________________________  ...

Colors: 8 Gearless: No Fast Sleeve change: No 4 motor cnc per printing deck: Yes Computer supervision:Yes Web width:1320 Print width:1300 Min print repeat: 380 Max print repeat:1100 Mech speed: 350m/min working speed: up to 300m/min Unwinding & winding: Turret FLYING SPLICE Max reel diameter 1000 Drying: 2 zones , 4 fans 2 gas burners Video camera: Yes Corona threatment:NO Web guides: FIFE Viscocity control Yes Wash system : yes, F&K Ceramic anilox + closed chambered doctor blade   1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm , 2x 320 L/cm , 3x 400 L/cm   200 sleeves repeat between 390 mm and 1090 mm ( 8 for each following repeat x 390 , 400, 410 , 420 , 430 , 450 , 480 , 510 , 530 , 540 , 550, 630 , 660 , 670, 740 , 780 , 800 , 850 , 880 , 930 , 990 , 1030, 1050 , 1090 + 8 twinlock 740 mm + 8 twinlock 1030   Mandrels for sleeve s 6 x360 , 6x 400 , 6x 420 ...

Configuration: ·       Unwinder ·       Teknek web cleaner ·       Corona treatment ·       6 Flexo Print Stations 6 × IS UV dryers ·       Cold foil module ·       Cold foil unwind/rewind ·       Lamination module ·       Laminates unwinder ·       Die-cutting section with 3 stations ·       EL camera system ·       Rewinder Tooling included: ·       Print cylinders + magnetic cylinder + varnish roller: o Sizes: Z87, Z96, Z110, Z132, Z140 o 5 print cylinders of each size o 1 varnish cylinder for print station 6 ·       16 anilox rollers Additional information:  End of 2024: full revision of the printing units and related tools completed

Gallus RCS 330 -sn1 8 colors Age 2004 Complete rail system Unwinder 1 meter roll diameter Web breaking detectors Teknek cleaning system Corona Antistatic system 8 printheads with UV ITERNO Ink pumps Sensotec control register system Rotary diecut ( K1B Gap Master) Knife cutting unit (Tidland) 3 knives AVT inspection system Rewinder Cold Foil Unit (Unwinder+Rewinder) Cold Foil pressure cilinder Cold foil small cilinder Webguide E&L Turnbar Verso printing unit

Gallus RCS 330– sn11 8 COLORS Age : 10 / 2005 Unwinder 1 meter roll diameter Web breaking detectors Teknek cleaning system Corona Antistatic system 8 printheads with UV ITERNO Ink pumps : 7 Sensotec control register system Rotary diecut ( K1B Gap Master) Knife cutting unit (Tidland) : 2 AVT inspection system Rewinder Webguide E&L Extra ink chamber : 28 available Diecut unit, Matrix rewinder, slitting unit, Camera AVT, rewinder Including 2 tooling sets and 1 anilox set (Extra tooling and anilox to be discussed) Tool List on request

10 colors Age : 2005 Complete rail system Unwinder 1 meter roll diameter Splice detector Web breaking detectors Teknek cleaning system Corona Antistatic system 6 printheads with IST UV units : 10 Ink pumps : 3 Sensotec control register system Rotary diecut ( K1B Gap Master) AVT inspection system Rewinder : compatible between both presses, need to choose Cold Foil Unit ( Unwinder+Rewinder) : compatible between both presses Cold Foil pressure cilinder : 3 Cold foil small cilinder : 3 Screen Printhead Gen I : 2 available for both presses, need to choose Screen Printhead Gen II : 2 available for both presses, need to choose Screen Printhead Gen III : 2 available for both presses, need to choose Mounting Device : 2 available for both presses, need to choose More ink chamber : 2 available for both presses, need to choose Mounting Device More ink chamber Tool List on re ...

9 Colors Age : 2007 Complete rail system Unwinder 1 meter roll diameter Splice detector Web breaking detectors Teknek cleaning system Corona Antistatic system Ink Pumps ; 1 Knife cutting unit : 3 knifes 6 printheads with IST UV units 9 Sensotec control register system Rotary diecut ( K1B Gap Master) AVT inspection system Rewinder compatible between both presses, need to choose Cold Foil Unit ( Unwinder+Rewinder) compatible between both presses Cold Foil pressure cilinder : 2 Cold foil small cilinder : 2 Screen Printhead Gen I : 2 available for both presses, need to choose Screen Printhead Gen II : 2 available for both presses, need to choose Screen Printhead Gen III : 2 available for both presses, need to choose Mounting Device : 2 available for both presses, need to choose More ink chamber : 2 available for both presses, need to choose

Reference ID PP-53973 Category Bag Machines Manufacturer - Model BL66 Year Built 2003 Color 4 Impression- Working Hours - Speed-- Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description a complete multiwall paper sack line Tuber: 3 unwinders Perforating unit Printing unit with 4 colors Cross pasting unit for up to 3 plies Digital lengthwise injectors for 3 plies - Maximum repeat: 1300 mm, Minimum repeat: 380 mm, Maximum width: 650 mm, Minimum width: 200 mm Transystem Bottomer: Automatic rotary feeder Bottom patch unit each side Double valve unit Maximum depth: 170 mm, Minimum depth: 80 mm, Minimum distance between centers: 250 mm, - Maximum distance between centers: 600 mm (with a maximum depth of 150 mm) A single valve carriage that can hold 2 sheets. Palletizer

Web unwinding device Corona Railway cleaner 8 flexographic printing stations 8 GEW UV dryers (GD3) 8 cooling rollers 1 rail system, 1 cold foil stamping unit, 1 laminating unit, 1 print job gluing unit (2 colours) Video control Register Control Rewinding unit Waste winding 1 rotary punching unit Refrigerator 8 pressure sleeve sets with magnets 8 anilox rollers

Transaction Web cleaning Corona 10 printing stations 10 flexographic printing units 10 paint pumps 1 hot foil 1 Screen print 1 Lamination 1 cold foil fixture 10 Uviterno UV Drying 1 rotate punch 1 Web Video 1 Rewind Printing Accessories: 336 Pressure cyinder 20 speedy whales 4 magnetic cylinders

Relax Web guidance 2-sided Teknek web cleaner 8 x flexographic printing stations 8 x GEW UV Dryer Cooling rollers and coolers included 1 x punching station with Rotometrics Accutrack unit Waste rewinding Sheet station with delivery Rewind EL Scan Inspection Camera 7 x Sets of Printing Cylinder with Magnetic Cylinder

Unwinding 2 flexographic printing units 2 UV drying 1 Screen print 2 punching unit Mesh winder Train station Reel Printing Accessories: Pressure cylinders, magnetic cylinders, anilox

Printing Width: 1250 mm // Web Width: 1300 mm

Anilox - cylinders and plates washer