boring mills, machining centers used for sale

Code: 0555 Brand: STEMA 2 BR Model: INSERMATIC CB/86 - CE Standard Drilling and inserting machine for furniture hinges , kitchens, cabinets, furniture in general - CE Standard Technical data: Drilling unit: Electropneumatic unit with motor Hp 2- 3000 rpm - Works from bottom to top, from under the panel - Drilling head: 3 spindles for hinges - 2 spindles for mounting plates Hinge insertion unit: N°1 single loader Worktable: rubber-coated rollers width 500 mm N° 6 mechanical stop blocks Suction 1 mouth diameter mm 80 Panel clamping: N° 2 vertical pressers Volt 380/50 Compressed air 6 atm Overall dimensions: mm 3600 x 1300 x 1300 h Weight kg 530

Load Weight Shelf: 30000 kgLoading weight per level: 3000 kgNumber of load levels: 2 x 5 Stk.Recommended material length: 6000 mmColumn width: 3000 mmShelf height: 2440 mmdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage

Load Weight Shelf: 15000 kgLoading weight per level: 3000 kgNumber of load levels: 5 Stk.Recommended material length: 6000 mmColumn width: 2 x 2000 mmShelf height: 2440 mmdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BORING MACHINE Type VITAP ALFA 21 n.21 mandrins motor power Hp 2,5 ( Kw 1,8) titltable head by pneumatic movement vertical or horizontal boring CE mark : YES volt. 380/50

bore capacity in steel (diameter): 20 mmthroat: 155 mmbore stroke: 80 mmturning speeds: 50 - 3100 U/min: 310mm mmtotal power requirement: 1,5 / 400 kW / Volttool taper: 2 weight of the machine ca.: 70 Kgdimensions: 0,6 x 0.4 x 9,9 mmBench drill- Rotating and swiveling tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50

bore capacity in steel (diameter): 28 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 3 MKtable:: 500 x 350 mmcolumn diameter: 105 mmturning speeds: 75 - 3010 U/mintotal power requirement: 0,9 / 1,2 kWweight of the machine ca.: 235 kg.range L-W-H: 1740 x 670 x 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC BORING MACHINE Type VITAP 212 n.02 boring heads ( n.21 mandrins each one ) horizontal and / or vertical boring pneumatic tilting lateral reference fences 45° deg. horizontal boring Technical Details : n.21 mandrins ( x2 ) centre distance between mandrins mm. 32 mandrins rotation speed rpm 2800 n.02 motors Hp 2 each one net weight kgs. 600 Volt. 380/50

Load Weight Shelf: 28000 kgLoading weight per level: 2000 kgNumber of load levels: 2 x 7 Stk.Recommended material length: 6000 mmColumn width: 3000 mmShelf height: 2440 mmdimensions: 3,7 x 2,55 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling and fitting machine Blum Pro-Center Masch. No. AK 00044 Year of construction 2010 Weight 105 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

bore capacity in steel (diameter): 40 mmthroat: 330 mmbore stroke: 190 mmspindle taper MT: 4 MKtable:: 500 x 400 mmcolumn diameter: 140 mmturning speeds: 90 - 1500 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 435 kg.range L-W-H: 570 x 930 x 2170 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

x-travel: 1700 mmy-travel: 400 mmz-travel: 400 mmControl: Siemens 480 D table width: 500 mmtable length: 2000 mmtotal power requirement: 16,25 kWweight of the machine ca.: 4750 kgdimensions of the machine ca.: 3000x 2500x 2800 mMachine number 9599- 4th axis / horizontal / diam. 315 mm- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0094 Brand: SCM Model: RECORD 110/S - CE Standard CNC working centre for doors, windows, furniture, arches and various - CE Standard - Year 2006 Technical data: X axis stroke mm 2990 - Speed 60 M/S Y axis stroke mm 1720 - Speed 45 M/S Z axis stroke mm 400 - Speed 25 M/S Working range X mm 3500 Working range Y mm 1815 Workpiece passage mm 155 Electrospindle Kw 7,5 18000 rpm Tool attachment HSK 63 Automatic tool changer with 12-position "RAPID 12" UNIVERSAL K2 power unit fixed for horizontal working Bar table with suction cups : N° 6 TV tables with displays N° 2 workpiece loading aid lifters Vacuum pump 250 m³/h (5,5 Kw) Conveyor on electrospindle to eliminate chipboards and dust XYLOG operator interface CNC managed by PC with WINDOWS interface Suction N° 2 mouths diameter mm 150 Compressed air 7/8 bar Machine overall dimensions: Length mm 3710 - Wi ...

bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 93-1420 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Braule Knotting Drill Number of drilling units 3 Motor power: 0.8kw Drill speed 2820r.p.m

bore capacity in steel (diameter): 12 mmthroat: 220 mmbore stroke: 60 mmthread capacity: 6 Mcolumn diameter: 70 mmbore spindle turning speed range: 120-6000 U/mintable-size: 300x250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

bore capacity in steel (diameter): 12 mmthroat: 220 mmbore stroke: 60 mmthread capacity: 6 Mcolumn diameter: 70 mmbore spindle turning speed range: 120-6000 U/mintable-size: 300x250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI IF Special machine for chairs automatically cuts and bores all type of parts of chairs and furniture components . composed by : - circular saw diam.mm.350 motor power hp 3 - boring unit ( boring head with 5/7 mandrins ) motor power Hp 3 max. working stroke of boring unit mm. 130 net weight kgs.400 Volt. 380/50

bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 93-1420 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI I2F machine for chairs composed by 3 working units : - circular saw diam. mm.350 motor power hp 3 - boring unit boring head with 5/7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 - vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage machine composed by 3 working units : 1) circular saw for cutting to length of pieces 2) boring unit equipped with multi bit drilling head 3) vertical spindle for moulding the machine may be used for a variery of job requirements , including the end cutting off , moulding curved surfaces and boring end cutting , or end cutting off amd moulding for finger jointing , or end cutting , etc.

working area: 5-40 x 1.000 mm- - -: - - - - - -- - -: - - - - - -Deep hole drilling machine | TIBO - tibo. E 40-1-1000The machine is in a very well-maintained condition.Technical data of the machine will follow soon.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: tibo E 40 1 1000 | tibo E40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM machining center model RECORD 130TV: - axis travel X=4330 - Y=1720 - Z=300mm - useful working range 3830 x 1245mm - piece passage 280mm - worktop with 6 TV bars - laser for positioning aid - supplied with 12 suction cups and 12 clamps for TV bars - 3 loading aids - rubbish drain mat - 100 mc/h vacuum pump - automatic lubrication - optimized and centralized suction - electronic control with PC-OFFICE, in Windows system and XILOG PLUS interface - dimensions installed with protections mt 8,4 x 5,9 Operator groups: - vertical spindle type POWER2000 liquid cooled, motor KW 11 with inverter, HSK63F connection, with 4th vector rotating axis, served by: Dual RAPID tool changer at 12 + 12 positions rear tool room with 12 + 12 positions - UNIVERSAL K horizontal milling unit with 2 outputs (tip + blade), adjustable 0-90° , KW 3 motor Machine according to CE standards No ...

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron: 36 mmspindle taper MT: 3 spindle turning speed - stepless: 140 - 1400 U/mintable-size: 500 x 360 mmcolumn diameter: 125 mmtotal power requirement: 1,5 kWweight of the machine ca.: 335 kgdimensions of the machine ca.: 500 x 800 x 1850 mmThe machine comes from a training company and has been maintained more thansecond hand.The general condition is very good, all functions have been checked.Accesories:- Drill chuck- infinitely variable speeds- lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM machining centre model RECORD 220 : - Useful axis stroke 3250 x 1300 x 300 mm - workpiece useful passage 320 mm - 3180 x 1250 mm multifunctional worktop - 3+3 reference stops for pendulum machining - Becker vacuum pump of 250 mc/h - Centralized automatic lubrication - NUM 1040 electronic control, with Alphacam software - machine according to CE standards, with bumpers and perimeter protections - year of production 1998 - Machine weight kg 8100 Operating units: - vertical electrospindle with inverter 900 – 18,000 rpm, ISO30 connection, with 4th VECTOR rotary axis, served by an on-board tool changer 10-position (RAPID 10) - drilling unit with vertical axis with independent control and encoder, and with 39 spindles as follows: 15 vertical spindles on X-axis 14 vertical spindles on Y-axis 2+2 horizontal spindles on X-axis 3+3 horizontal  ...

length: 1980 mmwidth: 670 mmheight over floor: 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM drilling machine model TOP29: - 29-spindle head with quick coupling - Adjustable drilling 0-90° from upper vertical to horizontal - Motorized movement of the drilling head - 6-position drilling depth revolver - 4 pneumatic clamps to hold the pieces - complete with aluminium rails AVAILABILITY FROM APRIL 2024

bore capacity in steel (diameter): 30 mmthroat: 210 mmbore stroke: 110 mmspindle taper MT: 3 speeds: 10 von 140-1800 U/mintable-size: 320 x 400 mmcolumn diameter: 100 mmdrill diameter: max. 31 mmDistance spindle/table max.: 710 mmtotal power requirement: 1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,4 x 0,7 x 1,73 mElectric 380 Volt: Column drilling machine with manual feed, speed regulation viaStep discs and 2-stage motor as well as spindle right - left rotation.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.