Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156797593

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

sheet width: 2600 mmplate thickness: 10,0 mmpre-bending: 8,0 mmdiameter of upper rolls: 230 mmside roll diameter: 190 mmdiameter of lower rolls: 210 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5.560 kg.range L-W-H: 4.650x1.380x1.300 mmFurnishing:- hydraulic 4 roll bending machine- Conical bending device- Induction hardened rollers- Digital display for the two side rollers- mobile control panel- 2 speeds- hydraulic folding bearing- Operating instructions in German- CE mark / declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 158927368

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

sheet width: 3100 mmplate thickness: 13,0 mmpre-bending: 10,0 mmdiameter of upper rolls: 300 mmside roll diameter: 210 mmdiameter of lower rolls: 270 mmtotal power requirement: 11,0 kWFurnishing:- hydraulic 4 roll bending machine- Conical bending device- Induction hardened rollers- Digital display for the two side rollers- mobile control panel- 2 speeds- hydraulic folding bearing- CE mark / declaration of conformity- Required instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156205473

new

check Seller: Knops Werkzeugmaschinen
Location: Türkei Land-de

add to watchlist

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 m4-ROLL Hydraulic Plate Rolling MachineWorking length 3100 mmMaximum thickness Pre-bending 40 mmBending 50 mmYield Point: 240 N/mm2Number of rolls 4Motor Power 55 kWMin. diameter mm - Ø Top Roll Diameter x 3Top roll Ø 540 mmBottom roll Ø 510 mmSide roll Ø 440 mmLength 6700 mmHeight 3000 mmWidth 3000 mmWeight 40.000 kgWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelDual bending speedsElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls ...

sheet metal working / Round Bending Machines
date: 09.09.2023 add to watchlist
approved
dealer
item-No.: 124830041

new

check Seller: DutchMach
Location: Land-nl

add to watchlist

AYEL-TECH ROUND BENDING MACHINE TYPE 1030 x 100 -Capaciteit 1030 x 3 mm -Diameter roll 100 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Weight 600 kg -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet metal working / Round Bending Machines
date: 09.09.2023 add to watchlist
approved
dealer
item-No.: 124718934

new

check Seller: DutchMach
Location: Land-nl

add to watchlist

AYEL-TECH ROUND BENDING MACHINE TYPE 1270 x 130 -Capaciteit 1270 x 3 mm -Diameter roll 100 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Weight 650 kg -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet metal working / Round Bending Machines
date: 09.10.2023 add to watchlist
approved
dealer
item-No.: 127057042

used

check Seller: DutchMach
Location: 7544c Enschede, ypelobrink 96 Land-nl

add to watchlist

AYEL-TECH ROUND BENDING MACHINE TYPE 3R HMD 1270 x 90 -Hydraulically adjustable achterrol -Aangedreven 3 rolls -Digital uitlezing -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet metal working / Round Bending Machines
date: 09.10.2023 add to watchlist
approved
dealer
item-No.: 133291172

new

check Seller: DutchMach
Location: Enschede Land-nl

add to watchlist

AYEL-TECH ROUND BENDING MACHINE TYPE IR 1050 x 46 -Capaciteit 1050 x 0.8 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet metal working / Round Bending Machines
date: 09.10.2023 add to watchlist
approved
dealer
item-No.: 126143486

used

check Seller: DutchMach
Location: Land-nl

add to watchlist

AYEL-TECH ROUND BENDING MACHINE TYPE IRM 1270 X 140 -Capaciteit 1270 x 5 mm -Electrically adjustable achterrol -Digital uitlezing -Roll Harde -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet metal working / Round Bending Machines
date: 09.10.2023 add to watchlist
approved
dealer
item-No.: 68358762

new

check Seller: DutchMach
Location: Land-nl

add to watchlist

AYEL-TECH ROUND BENDING MACHINE TYPE PWE 1080 x 100 -Capaciteit 1080 x 3 mm -Diameter roll 100 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Weight 600 kg -400V PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet metal working / Round Bending Machines
date: 09.10.2023 add to watchlist
approved
dealer
item-No.: 133291176

new

check Seller: DutchMach
Location: Enschede Land-nl

add to watchlist

AYEL-TECH ROUND BENDING MACHINE TYPE RM 1050 x 90 -Capaciteit 1050 x 3 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet metal working / Round Bending Machines
date: 09.10.2023 add to watchlist
approved
dealer
item-No.: 133449378

new

check Seller: DutchMach
Location: Enschede Land-nl

add to watchlist

AYEL-TECH ROUND BENDING MACHINE TYPE RM 1270 x 90 -Capaciteit 1270 x 2.5 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

sheet metal working / Round Bending Machines
date: 16.10.2023 add to watchlist
approved
dealer
item-No.: 67435647

new

check Seller: Weber Werkzeugmaschinen GbR
Location: Land-de

add to watchlist

Roll length: 1250 mm max sheet thickness: 1.25 mm Roll diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886290

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,450 tdimensions of the machine ca.: 3830 x 1160 x 1180 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886293

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 24mm total power requirement: 45+22 kWweight of the machine ca.: 43 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886389

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 4mm total power requirement: 5,5 kWweight of the machine ca.: 2920 tdimensions of the machine ca.: 3600 x 970 x 1140mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 155678648

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6 total power requirement: 7,5 kWweight of the machine ca.: 4,340 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156128968

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,570 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156128969

used

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4260 x 1160 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 155678701

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 18,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4260 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 155678702

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD 0: 20mm (s) Ampullen/h0: mm0: mmtotal power requirement: 22 kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: 4260 x 1660 x 1590 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886392

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm (s) total power requirement: 30 kWweight of the machine ca.: 13950kg tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156128970

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 30mm (S) total power requirement: 37 kWweight of the machine ca.: 15,3 tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886372

used

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13 total power requirement: 15 kWweight of the machine ca.: 8,84 tdimensions of the machine ca.: 4760 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886417

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 18,5 kWweight of the machine ca.: 9,6 tdimensions of the machine ca.: 4760 x 1660 x 1140mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886334

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 30 kWweight of the machine ca.: 15,15 tdimensions of the machine ca.: 5010 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886522

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6mm total power requirement: 11 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4880 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 155678661

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 9,7 tdimensions of the machine ca.: 5310 x 1660 x 1590 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886331

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 10mm total power requirement: 15 kWweight of the machine ca.: 10,6 tdimensions of the machine ca.: 5310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886577

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 22 kWweight of the machine ca.: 16,65 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886454

used

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 20mm total power requirement: 30 kWweight of the machine ca.: 18,3 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886297

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 37 kWweight of the machine ca.: 20,5 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886317

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 35mm total power requirement: 45+22 kWweight of the machine ca.: 35 tdimensions of the machine ca.: 5684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886318

used

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 40mm total power requirement: 2x37+30 kWweight of the machine ca.: 45 tdimensions of the machine ca.: 6085 x 2630 x 2787mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886319

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 50mm total power requirement: 45+45 kWweight of the machine ca.: 72 tdimensions of the machine ca.: 6370 x 3240 x 3660mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156128917

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 14,1 tdimensions of the machine ca.: 6310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156128918

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13mm total power requirement: 22 kWweight of the machine ca.: 21,3 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156128994

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16 total power requirement: 37 kWweight of the machine ca.: 23,81 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156886470

new

check Seller: A-Z Maschinenhandel GmbH
Location: Land-de

add to watchlist

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 20mm total power requirement: 37+22 kWweight of the machine ca.: 39 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 162855089
New in: 2002

used

Location: Land-de

add to watchlist

sheet width: 3000 mmplate thickness: 70 mmpre-bending: roll diameter: 660 mmtotal power requirement: kWweight of the machine ca.: 63 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163739300
New in: 1991

used

checkTOP Seller: Surplex GmbH
Location: region Gironde Land-fr
Price: used machinery auction RESALE 3.000 € add to watchlist

Description: Roll length 3050 mm Roll diameter 210 mm Crunching thickness 4 mm Roll thickness 6 mm Motor power 7.5 kW Rollers driven by independent hydraulic geared motors. Digital indicators to monitor the position of the crunching rollers. Cone setting device for the crunching rollers. Automatic hydraulic synchronisation of roller parallelism. Hydraulic opening head. Heat treatment of cylinders. Hydraulic roller diverterweight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,700 x 1,700 x 1,500 mm

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156797219

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

sheet width: 1050 mmplate thickness: 1,50 mmroll length: 1050 mmroll diam. toproll: 68,0 mmengine output: manuell kWweight: 280 kgrange L-W-H: 1930 x 700 x 1160 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156797312

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

sheet width: 1270 mmplate thickness: 1,50 mmroll length: 1270 mmroll diam. toproll: 75,0 mmengine output: manuell kWweight: 330 kgrange L-W-H: 2150 x 700 x 1160 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156797189

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

sheet width: 1270 mmplate thickness: 2,5 mmroll length: 1270 mmroll diam. toproll: 90,0 mmengine output: 1,1 kWbending speed: 6,0 m/minweight: 520 kgFurnishing:- motor-driven asymmetrical 3-roll round bending machine- hardened rollers- manual folding warehouse for quick removal of the workpiece- Profile inlets i.d. Rollers- Double foot switch for R / L run and emergency stop button- Conical bending device- rear roller manually adjustable- electr. Safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 156797286

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

sheet width: 1550 mmplate thickness: 2,0 mmroll length: 1550 mmroll diam. toproll: 90,0 mmengine output: manuell kWweight: 560 kgrange L-W-H: 2580 x 700 x 1250 mmFurnishing:- manual asymmetrical 3-roll round bending machine with hand drive- manual folding warehouse- manual delivery d. rear roller- Profile grooves: 4/6/9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163794513
New in: 1959

used

check Seller: G. Folmer
Location: Lager Solingen

add to watchlist

sheet width: 1020 mmplate thickness: 5 mmroll diameter: 110 mmweight of the machine ca.: 0,55 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
date: 14.02.2024 add to watchlist
approved
dealer
item-No.: 160904523

used

check Seller: Venker Werkzeugmaschinen GmbH
Location: 33335 Gütersloh Land-de
Price: 5.700 € add to watchlist

bending length: 1540 mm sheet thickness: 1.5 mm steel Roller diameter: 80 mm Motorized rear roller lining with automatic switch-off Clockwise and counterclockwise rotation via foot switch 3 roller drive Safety cable pull switch Conical rounding possible

sheet metal working / Round Bending Machines
date: 14.02.2024 add to watchlist
approved
dealer
item-No.: 161938332

used

check Seller: Venker Werkzeugmaschinen GmbH
Location: 33335 Gütersloh Land-de
Price: 4.800 € add to watchlist

Max. bending length: 2040 mm Max. sheet thickness: 1.25 mm steel Clockwise and counterclockwise rotation via foot switch 3-roller drive Safety pull switch Conical rounds possible

sheet metal working / Round Bending Machines
date: 09.02.2024 add to watchlist
approved
dealer
item-No.: 163302265

used

check Seller: Schrenk Werkzeugmaschinen
Location: Land-de

add to watchlist

Key data: 2040 mm, 6 mm

Specifications: Roll length 2040 mm Bending capacity 6 mm at 450 N/mm² Bending capacity approx. 80% of the bending capacity Upper roll diameter 170 mm Rear roll diameter 170 mm Lower roll diameter 165 mm

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163717780
New in: 2021

used

checkTOP Seller: Surplex GmbH
Location: Poggiomarino Land-it
Price: used machinery auction RESALE 400 € add to watchlist

Description: for edgesweight approx.: 35 kg, Approx. Onsite Dimension. (l x w x h): 460 x 580 x 420 mm

sheet metal working / Round Bending Machines
date: 12.04.2024 add to watchlist
approved
dealer
item-No.: 163658272
New in: 2000

used

checkTOP Seller: Surplex GmbH
Location: Com. Jilava , jud. Ilfov Land-ro
Price: used machinery auction RESALE 2.000 € add to watchlist

Description: sheet thickness (Mild Steel) 0.5 – 1.5 mm flange height with standard forming rolls 6 – 15 mm flange height with automatic material guiding system 8 mm or 10 mm minimum inside radius (for a 90 degree segment) 100 mm minimum inside radius (for a 180 degree segment) 130 mm speed 0 – 9.4 m/min power 2,2 kW voltage-frequency 230 VAC / 50 – 60 Hz / 1Ph+N+PE current : 10A mat. thickness when pre-bending when rounding: 1.5 mm, number of rolls: 2, total power requirement: 2.2 kW, weight approx.: 165 kg, Approx. Onsite Dimension. (l x w x h): 570 x 620 x 1,100 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information