gebr. Garage formwork, Fabr. Gardener Garage size, width 2.85 & 2.98 m, length 5.50 & 6.00 m, height 2.47 m, Prefabrication floors (3 pieces available) Garage formwork Ceiling tray, peeling doors/windows, partition wall recess can be heated with steam/hot water ZAFA steam heating system can also be purchased

Mixing plant/fresh concrete, with PEMAT mixer, winterproof with heating Sauter/gas, capacity 45-50 m³/h - Binder: 2x60 t (30x30)t & complete silo technology & cement screws - Aggregates: Bucket elevator via revesier belt in chambers (chimneys new about 3 years ago) Boxes/volume = 5 chambers (40,40,30,70,30)t, incl.: moisture measurement, incl.: mixer feed = weighing container (3000 kg) to the inclined belt (cleats) in mixer - Additives: incl. storage/volume: Second-chamber scale 25/5 kg - incl. spirit level: container scale 300 kg - Mixer : PEMAT - Partial mixer 1.25 m³ with 2 mech. Whirling

gebr. Cutting straightener Progress Ø 6 - 14 mm Outlet 8 m 5 reels Switchboard PC, Software Documentation

1 gebr. Straightening cutting system with inserting robot and lattice girder processing from a carousel system for ceilings and walls Specifications: 1.) Straightening-cutting and Bending plant, Fabr. Quick Type Lista Bend 16/5-12 max. bar length: 12,500 mm, bending distance 900 - 10,000 mm 2.) Fully automatic. Autolayer installation system processes lattice girders & rods Two insertion robots, each with 4 double gripping units System area 13,000 x 8,000 mm 3.) Lattice girder assembly BWC 450 for lattice girders up to 14 m, lattice girder height 70-45 mm, fully automatic. Storage, feeding, welding, cutting & unloading Operating System Windows-based AWM Software

1 gebr. Lattice beam processing plant, make Progress / GTA with infeed and outfeed working magazine and a double welding head Lattice girder processing station with multiple linear robots for storage & processing composed of: Auto. Storage system with handling beam Auto. transversely movable positioning carriage with 6 pcs lattice girder infeed tracks Lattice girder cutting machine Linear movable gripping unit (inlet gripper) Linear movable gripping unit (outlet gripper) Conveyor & buffer magazine, stacking beam Technical data: lattice beam height 70-300 mm, lattice girder width 70 - 90 mm, max. measuring/cutting length 10,000 mm, min. measuring/working length 800 mm, lattice carrier upper chord connecting welding system, for processing lattice girders type KT 800 in Heights from 70 - 360 mm and width from 70 - 90 mm

Multi-bar cutting machine type Schilt FLEXBAR 300 AE & cutting / shears SE 300 Active rack for rebar with 1 or up to 6 levels, Electrically driven infeed conveyor with coated rollers Hydr. Reinforcement cutting machine with 150 mm or 300 mm saw blade width the warehouse holds 14 m of reinforcing bars 12 m conveyor belt with volcano rollers Capacity of the system: at 8 mm diameter - 30 rods in one operation at 14 mm diameter - 18 rods in one operation at 28 mm diameter - 7 rods in one operation at 50 mm diameter - 2 rods in one operation

Varitop combi stair formwork for the production of straight-running precast stairs with landings in an overhead or lateral position max. number of steps 18 (type 18/160), running width max. 1.60 m (parking plus holding magnet must still be subtracted from the nominal dimension) Gradient stepless between 150 mm & 200 mm Stepless tread between 250 mm and 310 mm Thickness of the dimensions varies between 100 mm and 250 mm Platform length max. 160 m, platform attachment possible from the 4th step at each step

2 used stair formwork Howal Varioplus, type G III 18/150, sharp-edged hydraulic stair formwork maximum 18 steps, maximum running width 1.50 m, production of right- and left-handed prefabricated stairs, max. running width 1.50 m on 18 inclines, adjustable. Step side, transversely moved. Steel floor Steps are infinitely adjustable for gradients of 160-200 mm Steel floor for different running thicknesses between 80-200 mm horizontally adjustable Stair formwork is hydr. adjustable

1 used filigree ceiling system, make Weckenmann, composed of: - 2 filigree tracks, each 65 m long - Production width 2.50 m incl.: 2 concrete distributors, plotter for cleaning and recording, 2 pallets of cross-peelers, 2 pallets of magnetic rails

Battery mold with 10 compartments Year of construction 2017 - Compartment dimensions: 8.00m x 3.5m - 9 partition walls (a' 6to) - 2 outer walls (a' 10to) - suitable for precast wall thicknesses: 10cm to 20cm - surfaces 8 mm like new as used only few months. - Hydraulic system - 33 vibrators - heating pipes inside the cells (never used), steam connection possible

Used Stone Paver Manufacturer: Masa – Henke Year of Make: 2000 Condition: very good Only the stone paver is for sale, no circulation, boards, etc. Location: Italy Used block making machine Manufacturer: Masa - Henke Year built: 2000 Condition: very good Only the block making machine is for sale, no cycle, boards, etc. Location: Italy

Straightening cutting system with inserting robot and lattice girder processing 1. Straightening, cutting and bending machine Fabr. Fast, type Lista Bend 16/5-12, wire diameter 8-16 mm Coilw. up to 5t, Wire feed up to 140m/min, max. rod length 12,500 mm, bending distance 900 - 10,000 mm, two servogest. Bending head units with autom. Dorm change, five rotor straightening system, fully automatic Wire change, transfer magazine for autom. Taking 2. Fully automatic. AUTOLAYER installation system, - Processes lattice girders and rods, two inserting robots with 4 double gripping units each, positioning with additional stroke and 90° rotation. Head, system area 13,000 x 8,000 mm 3. Lattice girder assembly BWC 450 - For lattice girders up to 14 m, lattice girder height 70 to 45 mm, fully automatic. Storage, feeding, welding, cutting & unloading - Operating system Window

Column formwork - Twin formwork Fabr. Howal Type Hystanplus - Length of the formwork 16 m - Max. chamber size 1.00 x 1.00 m - Steel formwork - Incl. 10 vibrators - incl. converter - incl. control Formwork can be moved hydraulically

TECHNICAL SPECIFICATIONS Manufacturer: TEKA France Name: Concrete Batching Plant System type: Mixomat THZ in-line feeder Year of Make: 1993 Mixer: THZ 2250 ring plate mixer In-line feeder: 5 chambers, with fume hood weigh belt Number of silos: 5 pcs. Silo capacity: 3 x 60 t. + 2 x 40 t. (single chamber) Number of screw conveyors: 5 pcs. Hardened concrete capacity: approx. 70 cbm/h Hardened concrete output per chrag: 1,500 l / 1.5 cbm Heating: WE-HO hot air 60/24 - S200 Concrete recycling: GECO Flotmat 15 Vibro S (1998) SPECIFIC COMMENT - Complete concrete batching plant, fully functional - Incl. cement scale, additive scale, spirit level - Loading of in-line dosing unit via swivelling riser conveyor + hopper - Available from mid-July 2025

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Concrete batching plant Turbine type: Sternanlage (Schrapper) Type: H2 Year of Make: 1993 Mixer: BHS Twin Shaft Compulsory Mixer LEKX2.0 Number of binder silos: 3 pcs. Silo capacity: 2 x 100 t (single chamber), 1 x 100 t (double chamber) Number of augers: 4 pcs. Schrapper Type: Stetter Schrapper SW CRS150 Scraper capacity: 150 cbm/h Cement scale: yes Additive scale: yes Number of admixture tanks: 2 pcs. Control: SIMATIC OP27 RC system: Klärfix SPECIFIC COMMENT - Incl. control and control cabinet - No heating system - Fully functional

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

One used mesh welding line for standard mesh working line- and cross wires off spools, mainly exesting of: Line wire feed from spools, straightening units, line wire pull-off and compensating mechanism ( loop ), Roller Advance Feed, cross wire feed with disc insertion from spools, welding machine, Line Wire Shear mesh turning and stacking unit tying system for the mesh packages Extras: Spools Spare part package Butt welder

One used mesh welding line for standard and special mesh. Line wire feed from spools, coils or reels; straightening units, line wire pull-off and compensating mechanism; welding machine with roller advance feed; Cross Wire Disc Feed; Line Wire Shear; mesh turning and stacking unit This line is equipped as well with line wire pay off for spools. Extras: Spools ( 3 tons ), main trafo, compressor, butt welding machines and cold rolling line

One used high performance mesh welding line for standard mesh This lines is feeding cross and line wire off spools directly Max working speed are 180 cross wire/min Complete line from line wire pay offs up to turning ans stacking unit. Further equipment ( spools, butt welder , main transformer etc.. and cold rolling lines ) can be offered as well

Digital Printing Line for Concrete Slabs Manufacturer: Cismac / Sacmi Complete system (standalone) with input and task Usable working width: 1,200 mm about 5 years old, little used Digital printing line for concrete slabs Manufacturer: Cismac / Sacmi complete system (standalone) with input and output Usable working width: 1,200 mm About 5 years old, little used

ID3422 Putzmeister Autocor M28-4 rail-guided concrete distributor Rail-guided concreting spreader

One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm

One used EVG TSD 7 double step welding lines for the production of standard and special truss girders (e.g. decking girders) in large to mid-size series for girders from min 90mm to max 250mm height Upper wire: 5.0mm to 12.0mm, ripped and smooth Lower wires: 4.0mm to 10.0mm Zig Zack wires: 4.0mm to 7.0mm Max length of girder: 12.000mm

Italian made Mario Croci & Figli Concrete pipe machine. In great condition (the machine is new and it has never produced a single pipe). It is weather protected, placed in a dry warehouse. It produces 2 and 2.5m length pipes of D30 up to D120cm diameter. It comes with D300, D400, D500, D600 moulds along with rings. Located in Drama-Greece. Excellent bargain!

Complete plant for the production of L bricks and wall panelsMould list : 7 pieces of wall panel formwork 12 cm Pos. 1 Masonry panel formwork 550 / 800 x 490 mm Number of wall panels : 12 pieces 550 x 490 mm 12 pieces 550 x 490 mm Pos. 2 Masonry panel formwork 550 x 990 mm Number of wall panels : 16 pieces 550 x 990 mm Pos. 3 Masonry panel formwork 800 x 990 mm Number of wall panels : 16 pieces 800 x 990 mm Pos. 4 Masonry panel formwork 1050 x 990 mm Number of wall panels : 16 pieces 1050 x 990 mm Pos. 5 Masonry panel formwork 1300 / 1550 x 990 mm Number of wall panels : 8 pieces 1300 x 990 mm 8 pieces 1550 x 990 mm Pos. 6 Masonry panel formwork 1050 / 1300 x 490 mm Number of wall panels : 8 pieces 1050 x 490 mm  ...

Pallets Carousel for Double Wall (Twin Wall) and Filigree Floor Production, MFA M24514 Manufacturer: Vollert, Nuspl, Weckenmann, EBAWE, Filzmoser, RATEC, Unitechnik, SAA Year of construction: 2020, 2019, 2017, 2003, 1991 Control system : Siemens S7, Unitechnik Products: Twin Walls (max. height 3.0m), Filigree Floor Slabs PALLET CIRCULATION Pallets: 10.60m x 3.08m, 48 pieces STRIPPING AND LIFTING Hydraulic tilting station (EBAWE company, renewed in 2017) Lifting device for shell 1 + floor element (Weckenmann) CLEANING, PLOTTING, ROBOT-SHUTTERING AND OILING Automatic pallet cleaner, plotter, shuttering robot (Weckenmann, renewed in 2020 and 2003) CONCRETE DISTRIBUTION, VIBRATION Automatic concrete spreader 3m³, 9 ejection augers + 9 flaps, (Weckenmann/SAA company 2003, control replaced 2019), electric vibrating station (Vollert) CURING CHAMBER + AUTOMATIC PALLET ...

For Sale is a ACOTEC Production Line Manufacturer: ELEMATIC Output: 160 m2/h (double line) Year: 2019 This offer comprises 2 ELEMATIC production lines with a combined capacity of 160m2/h and also includes a FRUMECAR batching plant. Acotec panels are precast, non-load bearing partition walls. They are room-high and 600-mm wide, with a tongue and groove design along the vertical edge. The panels are 6 times faster to install than traditional brickwork and twice as fast as blockwork. Modules list of the production plant -Concrete Supply -Plate Handler -Plate Feeding Conveyor -Casting Module -Product Module 6/100 -Saw -Conveyor for Saw -Trimmer -Product Conveyor -Recycling -Stacker -Stack Conveyor -Stack Return Conveyor -Crossing Station -Restacker -Product Tilting Receiver Conveyor -Product Tilting Device -B-Quality Conveyor -Pallet Conveyor -Cleaning a ...

ID2950 Supra Schaltische/scarf tables 67 Avermann tables Wachenroth (Supra) 2.40 m formwork width 2.70 m total width 10.50m length 5 cm upstand 60 cm total height 24 cm smallest distance when stacking (max. occupancy approx. 15 tons) 67 Avermann Tables Wachenroth (Supra) 2.40 m formwork width 2.70 m overall width 10.50 m length 5 cm backsplash 60 cm total height 24 cm smallest distance when stacking (max. occupancy approx. 15 tons.)

ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...