used
Format range: Box length: 80-535 mm Box width: 50-400 mm Equipment: motorized right turn / back dust margin, laser counter, speed infinitely adjustable via potentiometer. Packing scheme: 1–4 rows / layers, results in 16 possibilities. Overhaul 2025: cleaned, checked, painted, new belts. Machine can be viewed by appointment while running.
Bobst Domino 145 II Matic, Year 1996, Longitudinal seam, Automatic floor (3-point), 4/6-Punktklebung, Cold glue system from Valco Year 2019 with 5x nozzles, Hot melt adhesive system by hhs-Xmelt year 2017 with 3x nozzles, Handle dispenser, CoroPack 125 Bobst is included, year 1996 - electronic is new.
Format range: max. 1100 mm, min. 66 mm. Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point gluing, electronic HHS X-tend top gluer, 8 channel with 6 application heads, equipped with the following additional modules for quality assurance: code reader / disc glue control / / pinball ejector control, disc bottom glue unit left, feeder with vibrator, tooth gauge and vacuum, cutting alignment right and left after the feeder, pre-crushing module, electronic servo overhaul folding with program memory, radio remote control, digital Position indicators, motorized format adjustment, fully automatic format setting with box storage, pump-up glue unit, Central transport in the folding, 2x motorized tool holders that can be raised, pressing device after folding, flipper ejector, kicker, counter, camera monitoring of the transfer station, 2x box aligner on the press belt, exte ...
HEIDELBERG DIANA SMART 115, Manufacturer: HEIDELBERG, Year of construction: 2018, - 2018, - Folding Carton Line, - longitudinal seam carton:, - max. 1150 x 600 mm, - min. 75 x 55 mm, - min. 45 x 55 mm (with small carton device), - Fold-bottom carton:, - max. 1150 x 600 mm, - min. 146 x 80 mm, - 4-point erecting carton:, - max. 1150 x 680 mm, - min. 120 x 110 mm, - 6-point erecting carton:, - max. 1150 x 630 mm, - min. 250 x 130 mm, - with BELKHOFF control system, - Rolling and drying tunnel, - TÜNKERS EAS 480 output station, right, 2019, - in production, - Available: immediately, - Located in: Germany
Format range: max. 940 mm, min. 50 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 8 channel with 3 application heads, disc underglue unit left, Pre-crusher right and left, kicker, counter, vibrator on the feeder, digital Position indicators, threading station, lower center feed in folding, pneumatic, intermittent press belt, cleaned, tested.
Reference IDPP-53236 Category Folder Gluer Manufacturer Bobst Model DOMINO 90 MATIC Year Built 1987 Max. size 800 x 900 mm Condition Good Location Europe Availability Immediately Machine Description Box types: straight-line, crash-lock bottom Materials: up to 600 gsm Lower left disc gluer NEW HHS system with guns (cold glue) NEW BELTS year 2025 a BOBST Easyfeeder 90
Format range: Max. sheet size opened: 2300 x 1000 mm Min. sheet size opened: 380 x 160 mm Min. sheet size folded: 185 x 130 mm Equipment: Longitudinal seam, folding bottom, double margin, 4 + 6 point gluing, electronic glue mill HHS XTS-E16 cold glue system, BJ. 2023 with 8 application heads, counters, fully automatic format setting, boxflow control with Touchscreen display, extended pressing station, ACE feeder with vacuum, material: Corrugated board with corrugated A, B, C, E, F, FE, EE, BE, BC, solid board: 800–1500 g/m², Maximum mechanical speed: 250 m/min, Bahmüller Retrofits 2025, including fully automatic SMB COR-Flex bundling machine. The machine is in very good condition and can be used by arrangement in production.
Format range: max. 1350 mm, min. 45 mm. Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic top gluing unit HHS X-tend, 8 channel with 4 application heads, high pressure, disc underglue unit left, Feeder with vacuum and vibrator, cutting alignment right and left, primary crusher right and left, kicker, counter, digital position indicators, add-on module for Folding bottom and 4 point, motorized center feed top/bottom in folding, Press rollers after folding, servo overhaul folding with touch screen, Camera monitoring of the deposit, cutting alignment on the press belt, extended, pneumatic press belt, cleaned, tested and painted in 2023.
used
Format range: Box length: 80-535 mm Box width: 50-400 mm Equipment: Standard, motorized curve right / back storage edge with vibrator, contactless Proximity switch, laser counter, motorized height adjustment, motorized lower Transport rollers adjustable via potentiometer, packing scheme: 1-4 rows / layers, yields 16 possibilities. Overhaul 2025: cleaned, checked, painted, new belts. Machine can be viewed by appointment while running.
Bahmüller Turbox BJD 2100, Max. Size: 2100x1200 mm, Min. Size: 380x160 mm, Longitudinal seam bonding, Automatic floor, 4-6 point bonding, Solid board: 800-1500 g/m², Hebklwexni D Eevy Aefn, Corrugated: N,F,E,B,C,A,EE,EB,BC etc.
Box format: Length: 100 mm - 400 mm Width: 50 mm - 320 mm Equipment: Standard, right-hand delivery, box material: 200-700 g/m², Box types: normal folding boxes, folding bottom boxes, 4-point erecting boxes, 6-point erecting boxes. Machine can be viewed by appointment while running.
Folder Gluer, ACE MACHINERY Model SIGNATURE 110N 46CS, Manufacture date: 1998, - Max Carton Width: 1.100 mm, - HHS Gluing device type KFE-KPE9, cold glue, The machine was mainly used for gluing shoe boxes and was modified/adapted, for this purpose to perform longitudinal seams and double longitudinal seams.
Format range: max. 750 mm, min. 66 mm. Equipment: Longitudinal seam, folding bottom, double edge, electronic HHS top gluing unit with 2 application heads, feeder with vibrator, fully automatic format adjustment, Cutting alignment right / left, primary crusher right / left, Bobst CUBE control, Disc undergluing unit on the left with fully automatic pump-up gluing unit, Central transport in primary crusher top/bottom, additional central transport up/down / bottom in folding, pressing device after folding, kicker, counter, long Pressing tape. Overhaul 2025: cleaned, checked, new feeder and transport belts.
Automatic Folder-Gluer ETERNA EFOLD 1100 ELITE Year of 2021 ETERNA - A Bobst Group Company - Lateral alignment at the feeder (both sides) - Tools and fixtures for 4-point and 6-point gluing - ERO gluing system (cold glue), year of manufacture 2020 - Pre-breaker Technical details: Gram weight: 200-800 g/m² Total power requirement: 35 kVA, Grammage: 200-800 g/m2, Total power requirement: 35 kVA
Format range: max. 680 mm, min. 126 mm. Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluer HHS, 4 channel with 2 application heads, double disc top glue, disc bottom gluer left, Bobst CUBE control, vibrator, primary crusher right and left, kicker, counter, digital position indicators, additional center transport at the top / bottom of the Folding station, folding floor module, pneumatic, intermittent press belt. Overhaul 2025: cleaned, checked, painted, new feeder and transport belts.
CMC Lynx 105 year: 1998 working width: 1050 mm for cold glue for sheets for board refurbished machine with grinded rollers and new bearings
Format range: max. 1650 mm, min. 275 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, Baumer HHS electronic glue mill with 4 application heads, Disc underglue unit on the left, electronic overhaul folding, Feeder with vacuum, cycle feeder, primary crusher left, motor-driven upper transport stations, kickers, counters, digital position indicators, extended folding station, motorized Threading station, Jagenberg DBS 01 control, fully automatic Format setting Jagset II, 3 x alignment on the press belt, pneumatic, intermittent press belt. Overhaul 2023: cleaned, checked, painted and equipped with new feeder and transport belts
• Reference ID PP-50092 • Category Folder Gluer • Manufacturer Jagenberg • Model DIANA 90-2 • Year Built 1993 • Condition Good • Location Europe • Availability December 2025 Machine Description • Setup table for adjusting the crash-lock bottom device during the production of another job, as well as motorized infeed and outfeed for the crash-lock bottom device • Double upper gluing unit at the beginning of the folding station with 7 mm wide glue discs • HHS nozzle gluing system with 8-channel control and 4 applicator heads • Small box configuration with 10 mm belt widths • Pocket gluing unit • Fine adjustment of the inserter stacker walls • Vibrator and air nozzles • Cut-size-dependent control of the collecting and pressing unit, and a pneumatically adjustable and reproducible pressure setting, including 2 additional pressing belts • ...
Format range: max. 750 mm, min. 66 mm. Equipment: Longitudinal seam, feeder with vibrator, fully automatic format setting, cutting alignment right / left, primary crusher right / left, Bobst CUBE control, disc undergluing unit on the left with fully automatic pump-up glue unit, quality assurance system HHS X-tend ² with code reader, disc glue seam control and flipper ejector, additional central transport at the top / bottom in folding, pressing device after folding, kicker, counter, long press belt.
Folding Box Auxiliary Packaging Machine Curve belt system with pneumatic lift table Due to the dissolution of the company. This machine can be combined with a folding carton gluer and thus makes packing into folding cartons provided for this purpose much easier. A new ribbon for the curve is also included. Machine can be loaded on site with forklift. If you have any questions, please contact us.
Pharmaceutical Folder Stahl T 36/4 F.2 -Year 1994, High pile feeder -Max Sheet Size: 14.17" x 25.5" - 360x650 mms. - Min Sheet Size: 3.15" x 3.94" - 80x100 mms. - Min folding length: 3/4" - 20 mms. -Max speed : 160 m/min -Four buckles -Available in September -Air pump, manuals, all accessories, All rollers in nice conditions
Lamina crash-lock gluer year: Specifications: Max thickness: 4mm for crash lock boxes 6mm for standard boxes Minimum thickness: 1mm corrugated flute type: E, B, C, Corrugated flute type: E, B, C
Diana Jagenberg 115-3 year:1990 -straightline -lockbottom -4 corners -6 corners -vibrator -football -counter -pre breaker without electronic glue system
Window patch machine Heiber & Schroeder, Year 1986, Model: WP 1
ANTER 800, year 2002 – serial Nº 576/632, straightline boxes, lockbottom boxes, 4 corner boxes, Max. size: 800mm; min. size: 106mm, Max. length box: 650mm, min. Length box: 60mm, Material: cardboard from 200gr/m2 up to 600gr/m2, Speed: Up to 350m/min., Cold glueing unit PAFRA with 2 guns, Semiautomatic packer VESTAPACK year 2001, nº 507
1 x folder gluer Kama ProFold 74 Basic : PLC with 8 control channels (Omron), colour touch panel Hotmelt system with 4 channels, 2 nozzles Job Planner Software Suction belt feeder – Top loader Transport module with rollers (280 cm long, approx.. 110”) and patented grid system for tool attachment Delivery unit with pressing roller (180 cm long, approx. 40”) 1 set pressure rollers (2x11wheels, 4x6, 2x3, 1x3s, 2x1) 14 pcs cross-beams, 28 pcs tool-fasteners 1 tipper fold plate including 2 blowing nozzles 1 pair of short plough fold devices with pneumatic flap for short flaps 1 pair of long plough fold devices incl. a pair of folding blades 6 pcs guide wires with special holders 1 x folding & gluing edition : set of pressure rollers (1x7s wheels, 2x6, 2x3, 1x3sil, 2x1sil), 4 pcs cross-breams, 8 pcs, tool-fasteners, alignment aid for cardboard 1 x set for automa ...
completely rebuilt Fidia Combi Unica Machine suitable for the production of folders, sleeves, envelopes, etc. Maler hot glue system, 2 glue heads. optional 3-point gluing for boxes possible. price quoted is for standard machine with 2 glue heads
Format range: max.: 450 x 450 mm min. 100 x 100 mm Equipment: 1 mold shaft, electronic nozzle gluing system HHS C 421 with 2 application heads, approx. 800 operating hours, max. 6,600 boxes / hour.
Format range: max. 1100 mm Equipment: Longitudinal seam, folding bottom, double edge, 4+6 dot gluing, feeder with suction belt and vibrator, electronic servo overhaul folding with touch screen and job memory, Accufeed (cutting orientation right / left after the feeder), primary crusher right and left with additional central transport top/bottom, disc bottom gluer on the left, electronic upper gluer ERO, 8 channel with 4 application heads, radio remote control, extension module A2 with lower upper central transport, Central transport at the top / bottom in folding, pressing device left/right, digital position indicators, pneumatic kicker, cutting alignment and video monitoring on the press belt, pneumatic, extended press belt.
Kohler Verpackungstechnik GmbH
