used Dryers for sale

Used stainless steel batch fluid bed dryer made by Aeromatic model Stre-30 G-W101. New 1978. Swiss production Wirbelschicht - Trockenungsaniage - Capacity of 150 liters of water evaporation / hr. - A shower - The heat exchanger - A blower - There is a buffer tank - The control panel - Channels are filter - Two tanks interchangeable - Worked at the pharmacy (product unknown) - A bag filter, co channels - Removed, not running around. Year - Complete documentation and schematics - Dimensions: Wed. 90 cm, length 170 cm, the total size of approx. 3 m height. Approx. 170 cm

Various ovens 1.5x1.5x3m Temperature 100 - 500 Celsius Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Termička obrada Off-line oblast termička obrada uključuje sledeće: 1. Linija se sastoji od 3 komora peći za spheroidizing � ...

EVERDRY Absorber for Compressed Air DN600 x 1700

Binder drying oven, convection, timer max. 100°C., good condition

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

Used lab spray dryer Buchi B-290 Power consumption: max. 2900 W Connection voltage: 200 – 230 V ± 10 % Frequency: 50/60 Hz Environmental conditions: for indoor use only Temperature: 5 – 40 °C Altitude: up to 2000 m Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity: 1.0 l/h H2O, higher for organic solvents Airflow: max. of 35 m3/h Motor control: Frequency converter Max. temperature input: 220 °C Heating capacity: 2300 W Heating control: PT-100, fuzzy logic, control accuracy ± 2 °C Interface: Serial port RS-232 for all parameters Spray gas: Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range: 1 – 25 µm Mean residence time: 1.0 – 1.5 sec. Pollution deg ...

Used Mini Spray Dryer Buchi B-290. Technical data Mini Spray Dryer B-290 Power consumption max. 2900 W Connection voltage 200 – 230 V ± 10 % Frequency 50/60 Hz Environmental conditions - for indoor use only Temperature - 5 – 40 °C Altitude - up to 2000 m Humidity - maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity 1.0 l/h H2O, higher for organic solvents Airflow max. of 35 m3/h Motor control - Frequency converter Max. temperature input 220 °C Heating capacity 2300 W Heating control PT-100, fuzzy logic, control accuracy ± 2 °C Interface Serial port RS-232 for all parameters Spray gas - Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range 1 – 25 µm Mean residence  ...

Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, cooler, thermostat.

Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

Used fluid bed dryer mady by Bühler model OTWG-90, new 1995. Technical data: - Weight 850 kg - Content m³: 1.5 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

The machine is still in operation and can be visited.

Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.

Used tray vacuum dryer 2 m3 Chemix

Used vacuum tray dryer made by Chemix, capacity 1m3.

Type: DAn06 max. operating pressure: 16 bar Capacity: approx. 420 m3/h For removing (drying) moisture from compressed (pressure) air

Used freeze drying lyophiliser made by Edwards. Used freeze drying unit with 8,4/6,72/5,04 m2 total shelf-surface for drying product in flasks 55 mm diameter and 100 mm hight. Technic based on the plant 5,04m2. 10/8/9/6 shelves 800x1050mm and one radiation shelf, shelf interdistances 75/94/125 mm. Shelf temperature -50/-48 C /+70 C. Ice capacity 100 kg. Ice condenser temperature -75 C. Chamber and ice condenser in details made of stainless steel 1.4541 / AISI 321. Two refrigeration system with two stage compressors and watercolled freon condenser, compressors DWM-Copeland, freon R502.

Electrolux T4250 Tumble dryer 13.9 kg Services and benefits • High productivity – two feeds per hour • Low energy consumption for optimum efficiency • Easy operation due to preselection of temperature and time • Large door opening for easy loading and unloading • Large, self-cleaning lint screen for easy maintenance • Door suspension optionally left or right for optimal workflows • Easy access to important parts from the front and back for easy maintenance • Selecta microprocessor control - 2 auto-stop programs for extra dry and dry - 5 to 9 tailor-made programs for every drying need - Accurate temperature control for unmatched drying accuracy - Anti-wrinkle cycle to avoid wrinkles when the dryer is not discharged - Error codes for easy troubleshooting - High contrast display - Coin counter operation • Service program for the adjustment of parameter ...

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.

Used dryer Glatt WST 100/150. New 1997. Dismantled. No documentation. 2 pieces available.

Used stainless steel fluid bed dryer made by Glatt model WST CD 30. New 1988. Pressure 2 bar. 15 KW ventilator, air heater and cyclones included. Unit still installed. Control Panel.

NEW TUEV acceptance behind them. Sell the machine because we don't need it at the time. If you have questions we are gladly available.

Manufacturer: Henny Penny Type: HC-934 External dimensions: 460 x 620 x 550 mm. 230V / 0.8kW. Three drawers. Digital timer. Heating methods: Mode A: 74°C Mode B: 85°C

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER

Used lab lyophilizer LyoQuest -55 ECO. YOM 2016. Available 2 pcs.

Material: product contact areas in stainless steel; Volume: 3000 ltr. Drive: 75 KW;

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.

Used drying system for hygroscopic plastics from Moretto. New 2011. Composition: - dehumidifier with two dehumidification columns XD610S, - stainless steel OTX 600VP insulated hopper with suction valve + heater 9 kW + fastening frame, - stainless steel OTX 1800VP insulated hopper with suction valve + 27 kW heater + fixing frame 27 kW heater + fastening frame, - server to control the process of air distribution to FLOWMATIK hoppers, - modular piping. Other details: - Drying time: 3h - Initial moisture content: 0.2% - Final moisture content: 0.02% - Air flow rate: 1200 m3/h - Dew point value down to - 75°C Operating hours: 29477 h

Manufacturer: GEA / Niro Atomizer and APV Anhydro Feed capacity (skimmed milk): 1428 kg/h Water evaporation capacity: 725 kg/h Bag filter: Intensive filter IFJC 97/1-3 RT Air heating: BRUNNER heat exchanger (steam) Atomizer: GEA / Niro Atomizer F35 (disc atomizer) Vibrofluidizer: Anhydro

Used spray dryer by ProCepT. Model SD1. Year of construction 2017. Dryer made in ATEX: EX II 3G. The ProCepT SD1 spray dryer is designed for formulation and process development as well as small-scale clinical production. The device enables spray drying of samples with a capacity of 0.5 ml to several liters. The equipment is used in preclinical and clinical applications with the ability to continuously process water in the range of 0.1-15 ml/min (0.01-11/h) (higher for organic solvents), with typical batch sizes from 100 mg to several kg dry product. The operator can monitor and control every critical process parameter using a computer with a touch panel. The software provides complete data recording with tracks. During the process, there is a negative pressure in the process column. The dryer uses a nitrogen recirculation system to process larger amounts of solvents. Solvents ar ...

REFAKT Dryer/Centrifuge/Dry Cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h depending on the type of plastic and wall thickness Drive power 30 kw

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.

The vacuum drying oven is made entirely of stainless steel on the inside and allows drying under vacuum up to 1 mbar (depending on the drying material and the pump connected). External heating is provided by a thermal fluid (water, oil). The heating circuit is absolutely tight, various attachments and flanges are available. A heater is available for heating with oil. The dryer was used to dry wood chips and is therefore not contaminated. The location of the device is Traben-Trarbach. Inspection possible, delivery in a radius of 200km possible by arrangement, otherwise only pick-up. Specifications: Boiler room capacity 630 litres, boiler room dimensions 780x1050x890mm³, number of heating plates 8, plate dimensions 730x1000mm², usable height between plates 85mm, 1 door with gasket Manufacturer Conrad Tschokke AG Winterthur Switzerland, year of construction 1970, complete original co ...

Continuous dryers, tunnel furnaces, tunnel dryers, drying ovens, belt dryers for example semi-automatic flocking system Manufacturer: The parts to be dried are transported in a railway integrated in the dryer. Dimensions outside Width: approx. 3,860 mm Length: approx. 9,260 mm Height: approx. 1465 mm + base 1250 mm Dimensions Inside: Height approx. 820 mm without suspension track Width: approx. 3,230 mm Length approx. 9,000 mm

Used small continuous dryer For drying sheet materials. Width approx. 0.80 m, length approx. 1.60 m Dimensions: Width c. 1.10 m, length 1.75 m, height c. 1.70 m Heating with Leister hot air unit up to 160°C with uniform outlet on dry material through perforated plate. Can be moved on wheels. Swivel control box. For an additional cost spray bridge as shown.

Horizontal vacuum bucket dryer mixer Knea dryer 7000 ltr. Used Double-walled vacuum mixer/dryer with heated wall and heated inner tube. With outlet opening, filling dome and service lid, for efficient drying, thickening of products and (contaminated) waste sludge waste. Built: 1997, is currently being regenerated Volume: 7,000 litres Temperature: 151°C Pressure / vacuum 5 bar / - 1 bar (according to pressure gauge), vacuum pump and electric boiler can be offered, as well as up to the customer-specific system Gearbox output speed: approx. 42 rpm (i = 32.8) Transmission power (1,400 rpm): 50 kW Mixer chamber: approx. 1,600 x L 4,400 mm Total dimensions: approx. 6,600 x 2,200 x 3,600 mm Changes and errors in the technical data, data and prices and intermediate sale reserved.

Used Spray Dryer with 15 L/h Evaporation Capacity Technical specifications: Material: acid-resistant steel AISI 304 Liquid evaporation capacity: 15L/h Year of construction: 2023 Controllability: - atomizer rotation (max 24000 rpm), - inlet temperature (max 300°C) - the rate of liquid administration (0-100%), - the frequency of striking of the hammers ridging the product Power 18 KW. Dimensions: 260016502500(mm) LWH Weight 800 kg. Number of pieces available: 3