The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
thermoforming machines /Thermo forming machines
date: 18.06.2024 add to watchlist
approved
dealer
item-No.: 164322364
New in: 1994

used

check Seller: Maschinenhandel Kmet
Location: Land-de

add to watchlist

Thermoforming machine Illig RDM-50 K • Year of built 1994 • Suitable for processing PS and PP • Forming area 500 x 280 mm • Max material width 525 mm • 200 mm air cylinder for per-stretcher • Servo driven main engine and material transport Specifications • 7 upper heating zones • 7 lower heating zones • Tool temperature control • Separate down holder cooling • Material sag control Additional equipment • Foil unwinding station • Endless stacking unit Good condition, available immediately

thermoforming machines
date: 20.06.2024 add to watchlist
approved
dealer
item-No.: 164334159
New in: 2004

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018.

thermoforming machines /Thermo forming machines
date: 18.06.2024 add to watchlist
approved
dealer
item-No.: 161422981

used

check Seller: GESTION DE TERMOPLASTICOS
Location: Land-es

add to watchlist

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.

thermoforming machines
date: 20.06.2024 add to watchlist
approved
dealer
item-No.: 164334160
New in: 2007

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Forming surface: 750x436mm, heating output: 155kW, max. compressed air supply: 10bar, weight: 9.2t, operational hours counter: 43,589h.

thermoforming machines /Thermo forming machines
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 164097559
New in: 1990

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 26.195 € add to watchlist

ILLIG UA 200 G thermoforming machine was built in 1990 in Germany. This highly efficient machine is used in the production of high-quality plastic parts, such as tubs, containers and car parts. As the ILLIG thermoforming line is equipped with two material feeders, the thermoforming process is fully automatic and also allows machining in sheets or from a roll. Technical data of the ILLIG UA 200 G thermoforming machine - maximum mould dimensions (L x W): 1960 x 980 mm - minimum mould dimensions (L x W): 860 x 720 mm - total heating capacity: 87.2 kW - maximum operating pressure: 10 bar - material feeder (2 pcs.) - power supply: 3x 380 V; 50 Hz

thermoforming machines
date: 20.06.2024 add to watchlist
approved
dealer
item-No.: 164334161
New in: 2015

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Platen dimensions: 1700x1250mm, with documentation, an inspection is possible.

thermoforming machines /Thermo forming machines
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 161944906
New in: 1988

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 116.670 € add to watchlist

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

thermoforming machines
date: 20.06.2024 add to watchlist
approved
dealer
item-No.: 163279120
New in: 2001

used

check Seller: GERMANPLAST SRL
Location: ponderano Land-it

add to watchlist

COEMTER BAG MAKER for BAGS-ON-ROLL TER CORE, type 92-90 38-25, constructed in 2001, n.2 nearly equal machines available, For LDPE LLDPE HDPE, Max bag width 900 mm., The machine is offered checked for good conditions, Constructors description:, AUTOMATION OF THE MANUFACTURING PROCESS, Bag making machines in continuous for bags in roll with core, with two tracks, making point-of-sale bags, freezer bags, refuse collection bags, etc., Robust and high-tech construction with continuous movement design to guarantee maximum reliability and minimum and easy maintenance., The sealing drum makes possible to work at low temperatures thanks to the long sealing time, and offers excellent adaptability to different types of materials, with maximum sealing guarantee., Mixed sealing optional., Use of independent band aligners before rewinding for perfect roll making., Placement of core container at floor  ...

thermoforming machines
date: 07.06.2024 add to watchlist
approved
dealer
item-No.: 162336408
New in: 1999

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

PS and PP THERMOFORMING SYSTEM (THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) Manufacturer / Origin: ILLIG (D) & KUHNE (D) & COLOTRONIC AG (CH) Max. film width 700-800 mm Equipment / Additional information: Thermoforming system is constructed as follows: - COLOTRONIC dosing unit CSK30 with 4 components // Age: 1999 - KUHNE Extruder KF70E & // Age: 1999 - KUHNE Co. Extruder K45-24D // Age: 1999 - KUHNE smooth and cooling rolls (calendering) / smoothing unit: GA4/900; puller: BA2-1/900 // Age: 1999 - Wide slot nozzle // Max. film width 700-800 mm // Age: 1999 - ILLIG thermoforming machine RDM K 50 // Age: 1999 M. No.: 322 // Counter: 80188 hours // Power: 800-1000 kg/h - GREINER stacking / Transfer device R3 (No.:00020) // Age: 1998 -04 Type: ÜBERGABEGERÄT R3 / M.No.00020 - ILLIG mill RS75B // Age: 1999 • Fully e ...

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 162907648
New in: 2006

used

Seller: Exapro
Location: Land-fr

add to watchlist

Two full lines forming MEICO FC600 WM Meico FC 600E thermoforming machine Year: 2006

thermoforming machines /Thermo forming machines
date: 07.06.2024 add to watchlist
approved
dealer
item-No.: 163104517
New in: 1999

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 164119303
New in: 1991

used

Seller: Exapro
Location: Land-fr
Price: 24.000 € add to watchlist

Description Sells BREBION thermoforming machine Year of construction : 1991 Useful thermoforming surface: 130 x 180 cm Quartz heating element Mould height : 70 cm Collection at buyers expense

thermoforming machines /Thermo forming machines
date: 06.06.2024 add to watchlist
approved
dealer
item-No.: 162965282
New in: 1992

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 163555595
New in: 2007

used

Seller: Exapro
Location: Land-cz
Price: 17.500 € add to watchlist

thermoforming machines
date: 06.06.2024 add to watchlist
approved
dealer
item-No.: 162329806
New in: 2000

used

check Seller: MJS-LINE GmbH
Location: 9220 Bischofszell Land-ch

add to watchlist

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 163612434
New in: 1999

used

Seller: Exapro
Location: Land-gr
Price: 41.500 € add to watchlist

It has been used for detergents (WP,WG) packaging. Range of packaging: (200gr-10kg) Maximum width of the sealing roll: 910mm Bag Shape Options: Pillow bag Type: MEGA V Produced: 1999 Weight: 1800 kg Power consumption: 5.5 KW Electrical Supply: 380 V Air Consumption: 600 L/min, 6 bar MADE IN E.U.

thermoforming machines /Thermo forming machines
date: 06.06.2024 add to watchlist
approved
dealer
item-No.: 153054774
New in: 1988

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 163196211
New in: 2017

used

Seller: Exapro
Location: Land-fr
Price: 24.000 € add to watchlist

A vacuum former used in the illuminated sign making industry, but has other applications as well. Bought in December 2017, has been used less than 100 hours. In a very good condition. Manufactured by Computerized Cutters Inc. Original price 43 545€. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch ) Sheet size 1500 x 2000 mm ( 59 inch x 79 inch ) 2. Minimum thickness 2 mm ( 0.078 inch ) 3. Maximum thickness 5 mm ( 0.196 inch ) 4. Maximum size to form 1300 mm x 1800 mm ( 51 inch x 110 inch ) depending on used material and form of the mold. Material PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Vacuum pump. Type 12 PBO Capacity 7 CFM (12 m3 / hr) Vacuum 10 mbar ( 0,145 PSI ) Vacuum. Used vacuum level-0.9 bar ( -14.5 PSI ) Content v ...

thermoforming machines /Thermo forming machines
date: 24.05.2024 add to watchlist
approved
dealer
item-No.: 164069649

used

check Seller: Reitz Technik GmbH
Location: 63599 Biebergemünd Land-de

add to watchlist

Collin Heating Press 78 Tons for Deforming Plastics / Prepregs for Carbon Parts / Composites / Rubber / Ceramic Compounds Type: Press 500 P Plate press for plastics processing / polymer materials / ceramic masses Press pressure approx. 78 tons Temperature range from 20° to 300°C Usable crimping area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 163873846
New in: 2013

used

Seller: Exapro
Location: Land-hu
Price: 117.000 € add to watchlist

Individually produced vacuum machines (2 pcs.) for the production of roof boxes, but also suitable for the production of other products within the dimensions below. Its maintenance is simple and its cost is very low. In addition to the two vacuum machines, the price also includes the tools required for the production of the roof box (4 types), TÜV Nord certificate, and training in the production process if necessary. Small vacuum machine: 2 pcs. sheet trays 2260 x 1060 mm (for the bottom and roof). The temperature can be adjusted per cycle. The horizontal movement of the furnace is solved pneumatically. The vertical movement of the table works pneumatically and its height is 380 mm. The vacuum capacity of the vacuum machine is 130 m3/hour. It is suitable for the production of 5 pcs of roof boxes per hour (bottom + roof). Big vacuum machine: 2 pcs. sheet trays 2380 x 1180 ...

thermoforming machines /Thermo forming machines
date: 07.05.2024 add to watchlist
approved
dealer
item-No.: 164005894
New in: 1994

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

add to watchlist

Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1994 Consisting of :- Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder Max. Cup dia. 135 mm Max. Height of Cups 130 mm, Min. height of cups 35 mm Max. Printing ...

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 163460407

used

Seller: Exapro
Location: Land-pl
Price: 18.000 € add to watchlist

I will sell Armor thermoforming machine, 1990s, fully renovated and renovated, all electronic devices replaced. Fully functional. Working area 2000x1800x650. Vacuum included. bathtub: 2000x2700 mm

thermoforming machines /Thermo forming machines
date: 07.05.2024 add to watchlist
approved
dealer
item-No.: 164005882
New in: 1999

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

add to watchlist

POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 164264249
New in: 2018

used

Seller: Exapro
Location: Land-gr
Price: 295.000 € add to watchlist

Volpak SI 280 For stand-up pouches up to 2500ml and speeds up to 240ppm Basic Info TECHNOLOGY: Horizontal Stand-up Pouching INDUSTRY: Beverage, Home Care, Personal Care, Food, Dairy, Tea & Coffee, Pet Care, Chemicals SEGMENT: Soft Drinks & RTDs, Juice, Wine & Spirits, Other Beverage, Air Care, Other Home Care, Dishwashing, Home Insecticides, Laundry Care, Cosmetics, Deodorants, Fragrances, Hair Care, Skin & Sun Care, Liquid Soaps, Toothpaste, Other Oral Care, Baby Food, Baked Goods, Biscuits & Crackers, Candies & Gums, Cereals, Chocolate, Salt, Sugar & Spices, Bars, Frozen Food, Oils & Fats, Other Food, Pasta, Noodles & Rice, Sauces & Condiments, Snacks, Soup & Stock Cubes, Spreads, Ready Meals, Processed Fruits & Vegetables, Processed Meat & Fish, Cheese, Yoghurt, Other Dairy, Dairy Alternatives, Powdered Milk, Coffee, Tea, Other Tea & Coffee, Pet Food, Other Pet Care, Coatings  ...

thermoforming machines /Thermo forming machines
date: 07.05.2024 add to watchlist
approved
dealer
item-No.: 164005869
New in: 1999

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de

add to watchlist

OMSO DM385 Automatic machine for dry offset printing in upto 6-Colors over the entire surface of oval, square or rectangular Tubs plus 2 x Colors on the base of the Tubs. Print Roller self cleaning function when colors are changed. Tub stacks fed by an automatic Elevator Tray Feeder. UV Curing Tunnel, for the 4 x Tub side-walls & for the Base. Precision Counter/ Stacker, delivers counted magazine stacks. Optical centering/ registration device for the Printing Plates via a Telecamera and Monitor. Machine can print upto 2 x Colors on the Tub-Base, another two Print Heads can be retrofitted to achieve 4 x Color printing on the Tub-Base. Machine can be preset for HD Printing. Central Operator Control Panel Modern PLC machine controls. Technical Specifications: Automatic Elevator Tray Feeder Auto-Conveyor to Main Print Unit Universal Screw Denester ARCOTEC CG30-2 Corona pretre ...

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 163858763
New in: 1993

used

Seller: Exapro
Location: Land-it
Price: 24.000 € add to watchlist

Veripack TFH18 PITCH 300 Thermoforming Machine. Year of production 1993, completely overhauled in 2019. Type of packaging thermoformed with flexible film. Equipped with n. 6 forming molds of various sizes.

thermoforming machines
date: 06.05.2024 add to watchlist
approved
dealer
item-No.: 163997589
New in: 2011

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de

add to watchlist

Fully Automatic Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF integrated Flap-Folder & Carton Liner, age Dec. 2011 : OK-Corp Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF with integrated Carton top Flap Folder & PE Film Carton Liner from a Roll of Film,. Full Stainless Steel Construction, age Dec-2011. Automatically Erects Cartons, tapes the bottom, Lines the Cartons with film from a Roll. Speeds upto 15 Cartons per/ min Siemens S7 PLC Controls Max/ Min. Carton sizes: Case-sizes.png

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 164154706
New in: 1982

used

Seller: Exapro
Location: Land-ro
Price: 6.500 € add to watchlist

Thermoforming - ILLIG 37/10 RDM automatic roll forming machine Automatic thermoforming machine with the following technical data: ILLIG 37/10 RDM brand, FORMING AREA 475 X 250 mm, forming depth 100 mm, maximum film width 495 mm, maximum film roll diameter 1200 mm Use material: PS, PP, PVC; We sell a two nest mould for mushroom casseroles mounted on the machine.You can inspect it in work!

thermoforming machines /Thermo forming machines
date: 06.05.2024 add to watchlist
approved
dealer
item-No.: 163997575
New in: 2006

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de

add to watchlist

ILLIG RDM54K, age 2006 Preheater ILLIG VHW 72, 2-Roll ILLIG RDM54K with Indramat Servomotor Indexing Max. Film width 545 mm Double Heating, Heating Capacity 45.10 kW Max. Form area: 520 x 300 mm Indramat Servomotor Plug Assist Max. depth Draw: 125 mm Auto Transport Rail Spreading for PP Auto. Sheet Sag Control Inline Counter/ Stacker ILLIG SZA Inline Grinder ILLIG RS75b (High Version) with blower Siemens SIMATIC MULTI Panel Color Display, with Touchpad Controls Siemens S7 PLC

thermoforming machines
date: 20.06.2024 add to watchlist
item-No.: 163807087
New in: 2000

used

Seller: Exapro
Location: Land-es
Price: 54.500 € add to watchlist

Thermoforming machine for cups (Eltonpack Mod. 6000) Year 2000 Includes BIG DRUM dispensers

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information