The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
drive motors
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 160072919

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 4.290 € add to watchlist

TWIN DISC MG514 marine transmission was built in Belgium. The device working with high- or medium-speed diesel engines used in, for example, tugs or ferries, optimises the control of engine power to increase overall cost-effectiveness, productivity and boat performance. The TWIN DISC MG-514 transmission operates at a rotational speed of 1800 rpm with a ratio of 2.00:1 and has 360 HP of power. The machine comes from an engine in very good condition with which it has worked for a small amount of time. The offered device is fully complete. The total weight of the machine is 525 kg. Technical data of the TWIN DISC MG514 transmission - ratio: 2.00:1 - power: 360 HP - maximum rotational speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - overall dimensions (L x W x H): 80 x 80 x 80 cm - total weight of MG514 machine: 525 kg

drive motors
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 160072927

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 4.290 € add to watchlist

TWIN DISC MG514 transmission was manufactured in Belgium. Used on high- or medium-speed diesel engines, the machine significantly increases overall boat efficiency and productivity by optimising the control of engine power. The offered TWIN DISC MG-514 marine transmission with a power of 360 HP operates at a rotational speed of 1800 rpm and has a ratio of 2.00:1. A fully complete machine with low mileage, has been used on an engine in very good condition. The total weight of the machine is 525 kg. Technical specifications of the TWIN DISC MG514 marine transmission - ratio: 2.00:1 - power: 360 HP - speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - dimensions (L x W x H): 80 x 80 x 80 cm - weight of the MG514 machine: 525 kg

drive motors
date: 11.06.2024 add to watchlist
approved
dealer
item-No.: 156332135

new

check Seller: KKT oy
Location: Land-fi
Price: 6.700 € add to watchlist

Spicer Powershift Transmission 3019FMHR24341-110 This 3-speed powershift transmission is designed to handle heavy-duty applications, including lift trucks; rough terrain lift trucks; front end loaders; rough terrain cranes; and other mining, construction, and industrial machinery. PDF brochure laitetori.fi/site/assets/files/7111/spicer_vaihdelaatikko.pdf Transport weight 438kg

drive motors
date: 31.05.2024 add to watchlist
approved
dealer
item-No.: 153869765

used

check Seller: MATEC system+technik GmbH
Location: Land-ch
Price: 160 € add to watchlist

Gear motor Lenze Flange gear motor, shaft diameter 25 mm Wavelength 50 mm 1.5 kW Reduction 20.04 Output speed 172.1 In good condition, ready for use Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

drive motors
date: 28.05.2024 add to watchlist
approved
dealer
item-No.: 161190837

used

check Seller: KOPACK UG
Location: 14641 Nauen/Berlin Land-de

add to watchlist

Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!

drive motors
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 160204582

new

check Seller: IPV GmbH
Location: Land-at
Price: 1.450 € add to watchlist

Gear motor, R97 DRN90L4/BE2, 20rpm, 1,5KW, SEW Eurodrive, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - 1461/20 rpm I=72,17 - 1,5 KW, 230/400 V - 710 Nm - Shaft D60mm x 115mm - 85 x 35 x 38cm high, 131 kg - Year of manufacture 2019 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

drive motors
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 160203340

new

check Seller: IPV GmbH
Location: Land-at
Price: 785 € add to watchlist

Servo planetary gear alpha, SP 140S-MF1-7 -2K1-2S, I=7, Wittenstein, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - for Shaft D38mm, - centering D130mm - I=7 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

drive motors
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 160203341

new

check Seller: IPV GmbH
Location: Land-at
Price: 785 € add to watchlist

Offset downforce, VNK2A 251, 6-49Nm, Bosch Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Tool holder 1/2" square 6-49Nm, Max. 1000rpm Maintenance free for 1 million full load cycles Rexroth No. 0608800633 For screw solutions Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

drive motors
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 158733882

new

check Seller: IPV GmbH
Location: Land-at
Price: 750 € add to watchlist

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

drive motors
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 160053231
New in: 1996

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: 6222 NS Maastricht Land-nl

add to watchlist

Eagle Gearbox Reduction : i = 1 : 85 Dimensions : 1100 mm x 800 mm x 400 mm Outgoing shaft : avm. 50 mm, with pulley SPC 400-3 Incoming shaft : avm. 100 mm, with clamping bushing

drive motors
date: 21.05.2024 add to watchlist
approved
dealer
item-No.: 160053233
New in: 1985

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: 6222 NS Maastricht Land-nl

add to watchlist

Radicon worm gear Type : BU 12 Ratio : 30 : 1

drive motors
date: 20.05.2024 add to watchlist
approved
dealer
item-No.: 131025555
New in: 1993

used

check Seller: Dematech s.r.o
Location: 38601 Strakonice, Jinin 78 Land-cz
Price: 3.500 € add to watchlist

new, unused Right Angle Shaft Double Stage Reduction Horizontal rotating NE23BRN4 N (reducer with series N compact housing solid shaft) E (Size E) 2 (Double Stage Reduction) 3 (with right angle horizontal shafts) BRN (indicates the assembly arrangement shaft arrangement) 4 (nominal ratio) 71 kW n1 750 u/min n2 187,5 u/min

drive motors
date: 14.05.2024 add to watchlist
approved
dealer
item-No.: 138933354

used

check Seller: Hinrich Goltz & Söhne GmbH
Location: 21129 Hamburg, Köhlfleet-Hauptdeich 22 Land-de

add to watchlist

1,94:1

drive motors
date: 14.05.2024 add to watchlist
approved
dealer
item-No.: 138604932

used

check Seller: Hinrich Goltz & Söhne GmbH
Location: 21129 Hamburg, Köhlfleet-Hauptdeich 22 Land-de
VS

add to watchlist

drive motors
date: 14.05.2024 add to watchlist
approved
dealer
item-No.: 138845358

used

check Seller: Hinrich Goltz & Söhne GmbH
Location: 21129 Hamburg, Köhlfleet-Hauptdeich 22 Land-de
VS

add to watchlist

2,91:1

drive motors
date: 14.05.2024 add to watchlist
approved
dealer
item-No.: 138605016

used

check Seller: Hinrich Goltz & Söhne GmbH
Location: 21129 Hamburg, Köhlfleet-Hauptdeich 22 Land-de
VS

add to watchlist

2,57:1

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140272511

used

check Seller: Amsterdam Alexandria Marine
Location: 2153 GK Nieuw-Vennep, Boekweitstraat 17 Land-nl

add to watchlist

TWIN DISC MARINE GEARBOX - MG 5050 - 2.5:1

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140272518
New in: 2007

used

check Seller: Amsterdam Alexandria Marine
Location: Land-nl

add to watchlist

2 PCS - TWIN DISC MARINE GEARBOX - MG 5202 DC - 5.04:1 - COMPLETE WITH NEW COOLERS AND HYDRAULIC HOSES ALSO AVAILABLE FOR SALE PER UNIT

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140272550

used

check Seller: Amsterdam Alexandria Marine
Location: 2153 GK Nieuw-Vennep, Boekweitstraat 17 Land-nl

add to watchlist

MASSON MARINE GEARBOX

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140272557

used

check Seller: Amsterdam Alexandria Marine
Location: 2153 GK Nieuw-Vennep, Boekweitstraat 17 Land-nl

add to watchlist

REINTJES MARINE GEARBOX - WAV 550 B - 5.158:1

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140272558

used

check Seller: Amsterdam Alexandria Marine
Location: 2153GK Nieuw-Vennep, Boekweitstraat 17 Land-nl

add to watchlist

REINTJES WAF 560 5.05:1

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140272561

used

check Seller: Amsterdam Alexandria Marine
Location: 2153 GK Nieuw-Vennep, Boekweitstraat 17 Land-nl

add to watchlist

REINTJES MARINE GEARBOX - WAV 500

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140272562

used

check Seller: Amsterdam Alexandria Marine
Location: 2153 GK Nieuw-Vennep, Boekweitstraat 17 Land-nl

add to watchlist

2 PCS - ZF MARINE GEARBOX IRM 350 1.653:1

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140272565

used

check Seller: Amsterdam Alexandria Marine
Location: 2153 GK Nieuw-Vennep, Boekweitstraat 17 Land-nl

add to watchlist

ZF MARINE GEARBOX ZFW 4610 5.037:1

drive motors
date: 13.05.2024 add to watchlist
approved
dealer
item-No.: 140956925
New in: 2009

used

check Seller: Amsterdam Alexandria Marine
Location: 2153 GK Nieuw-Vennep, Boekweitstraat 17 Land-nl

add to watchlist

SOLD MARINE GEARBOX WITH PTO GUASCOR R360 4,4:1 SERIAL NUMBER 113058 MANUFACTURING DATE 13-11-2009

drive motors
date: 10.05.2024 add to watchlist
approved
dealer
item-No.: 158741911

used

check Seller: MATEC system + technik GmbH
Location: 4900 Langenthal Land-ch
Price: VB 440 € add to watchlist

Gear motor SEW Through hollow shaft 50 mm Motor 1.5 kW Reduction 94.93:1 Output speed 15 rpm In good condition, ready for use Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

drive motors
date: 31.03.2024 add to watchlist
approved
dealer
item-No.: 162496912

used

check Seller: IPV GmbH
Location: Land-at
Price: 1.990 € add to watchlist

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

drive motors
date: 19.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 153628988

used

check Seller: THERMOSOLUTIONS ENERGY
Location: 22775 RIO DE JANEIRO Land-br
Price: 80.000 € add to watchlist

GE 1085 HP (809 kW) High-Torque, series wound, DC drilling motor Horizontal, drip-proof fully guarded, blower ventilated

drive motors
date: 19.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 159764286

used

check Seller: THERMOSOLUTIONS ENERGY
Location: 22775 RIO DE JANEIRO Land-br
Price: 50.000 USD add to watchlist

Used in running condition

drive motors
date: 11.03.2024 add to watchlist
approved
dealer
item-No.: 140809107

new

check Seller: Mediapack GmbH
Location: Land-de

add to watchlist

SEW Eurodrive Motor SEW RF 47 DT90L4/BMG/MM15

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information