metal working machines used for sale (35,076)

Key data: 850 mm, 520 mm, 540 mm

used SUPERMAX YCM-FV 85 A Vertical Processing Centers. Inv. Num. : 9201 Type: YCM-FV 85 A Producer: SUPERMAX Generated: 2000 Parameters: Control system: FANUC Work table length: 1000 mm Work table width: 520 mm Maximum vertical spindle speed: 10000 1/min X-axis travel: 850 mm Y-axis travel: 520 mm Z-axis travel: 540 mm Machine height: 3110 mm Machine length: 2820 mm Machine width: 2835 mm Machine weight: 5300 kg

used Too-Temp TT-188 Miscellaneous. Technical data: Manufacturer: Tool-Temp Type: TT-188 Capacity: approx. 6 litres Temperature range/cooling capacity with water: up to +90°C with oil: up to +150°C Temperature control: self-optimizing microprocessor controller MP-888 Cooling capacity: approx. 18 kW at +90°C Heating capacity at water operation| 9 kW with manual step switching: 3/6/9 kW in oil operation: 3 kW Pump performance Connected load: 0.75 kW Pressure operation: max. 4.5 bar/max. 75 l/min. Suction operation – vacuum: max. 8 mWS Dimensions and weight Dimensions L/W/H: 670 mm, 260 mm, 650 mm Weight: approx. 55 kg (empty) Condition Condition: Used Functional: tested and fully functional

used TOS WH 63 Table Drills. Inv. Num. : 9200 Type: WH 63 Producer: TOS Created: 1966 Parameters: Work table length: 800 mm Work table width: 800 mm Maximum weight of the workpiece: 2000 kg X-axis travel: 1000 mm Y-axis travel: 710 mm Travel Z axis: 1000 mm Machine height: 2280 mm Machine length: 4050 mm Machine width: 2100 mm Machine weight: 7600 kg Equipment: DRO Vise Cube Rulers

used Matec 50 HVU Vertical Numerically Controlled Machining Centres. CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-c ...

used SCHLATTER for special and standard mesh Mesh Welding Machines. Working range Mesh width (cross-wire length) max. 1,500 – 3,080 mm Distance between the outermost longitudinal wires max. 2,750 mm Number of longitudinal wires, depending on configuration max. 64 Longitudinal wire spacing, fixed 50 mm with single bars and 100, 150, 200mm with double wire Longitudinal wire diameter: a. 4.0 – 12.0 mm single wire and B. 4.0 – 9.0 mm Double Wire Cross-wire spacing min. 40 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0–12.0 mm Mesh length: up to 14.000mm

used SCHLATTER MG303 Mesh Welding Machines. Working range Mesh width (cross-wire length) max. 1,600 – 2,500 mm Distance between the outermost longitudinal wires max. 2,400 mm Number of longitudinal wires, depending on configuration max. 26 Longitudinal wire spacing: 150 mm Longitudinal wire diameter 4.0 – 8.5 mm Cross-wire spacing min. 50 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0 – 8.5 mm Working speed: max 150 cross wires/min Scope of supply: line wire spool pay off to mesh paket stacking system

used CAPTAIR 100 Welding Fumes Extractors. Welding Fumes Extractor CAPTAIR type 100 Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Total height: 1300 mm

used SAF AZUR 1.2 M Welding Fumes Extractors. Welding Fumes Extractor SAF AZUR Voltage: 220 V mono Width: 800 mm Depth: 1200 mm Total height: 1200 mm Tubing height: 2000 mm

used Haimer Tool Dynamic TD 2009 Balancing machine. Year of construction 2009 The machine has hardly been used and is in very good condition. For the technical data, please refer to the models.

used MECANUMERIC MECA EASY 1510. CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used - : Price ex location: 23.500.-€ (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMONSTRATION MACHINE Three-axis milling machine in flatbed gantry design. Working paths X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame wag Bortal: Design as a solid, stress-free, completely welded slahl construction, powder-coated. Heavy table base to accommodate the VAC-CAISSON vacuum table, designed as a cassette, air passage holes in a grid of 10 mm. Feed speed: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, sliding shoes with upstream ball circulation. Transmission : Precision Ball Screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Rep ...

used Hyundai-Kia SKT300MS. For sale: Hyundai-Kia cnc lathe type SKT300MS. This machine is equipped with a Fanuc 21i TB control. De machine has a main and sub spindle. The chuck size on the subspindle is 300 mm with a bar capacity from 90 mm. The chuck size on the sub spindle is 8 inch (210 mm). Maximum turning diameter is 500mm, maximum turning length is 680 mm. The machine is equipped with a 12 position revolver with BMT-65 toolholders. All toolholders are included. Inclusive 4 pieces rotary toolholders. The machine has a toolsetter,parts catcher and a chip conveyor with right side discharge. On stock for sale

Key data: 3000 mm, 55 mm

used Irco Profimat 55.5 /196.6/3. For sale Irco bar magazin Typ Profimat 55.5 /196.6/3. The barfeeder is complete with MPG and for maximum bar diameter from 55 mm. Maximum bar length is 3000 mm. The machine has 6 channels in reasonable good shap. Out of stock.

used PEDDINGHAUS 210 SUPER 11. Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T

used Union BFT 80/31. Bench boring mill Union BFT80/3-1 Table boring mill Spindle diameter: 90 mm Recording: ISO 40 Speed: 8 - 1,600 rpm X-axis: 1,100 mm Blsdpjy Rgncsz H D Adoh Y-axis: 1,100 mm Z-axis: 1,700 mm W-axis: 600 mm 4-axis digital: Table dimensions: 1,000 x 1,100 mm Rotary table: 360° (B-axis) Table load: 2,500 kg max. Equipped with: - A large amount of tools - Operating instructions - Digital displays on X, Y, Z, W Table boring mill Union Spindle diameter: 90 mm Spindle mount: ISO 40 Speed range: 8 - 1,600 rpm X-axis adjustment: 1,100 mm Y-axis adjustment: 1,100 mm Z-axis adjustment: 1,700 mm W-axis adjustment: 600 mm Table dimensions: 1,000 x 1,100 mm Table load: 2,500 kg Rotary table: 360° 4-axis digital: Equipped with: - Many tools - Operating instructions Country of origin: Germany Spindle power: 23 kW Machine weight ...

used WMW GSU 315 X 500. MAX DIAMETER 320 , MAX LENGTH 500

used TOS OH6. MAX DIAMETER 550 , MAX MODULE 6

used WMW ZSTZ 315 C. MAX DIAMETER 315 , MAX MODULE 6

used WMW ZFWZ 800 X 10/II. MAX DIAMETER 800 , MAX MODULE 10

used WMW ZFWZ 800 X 10/II. MAX DIAMETER 800 , MAX MODULE 10

used ARO PAN 160 Punktschweiß Hatec AM 90 (ü0413). ARO PAN 160 Spot Welding Machine incl. Control Cabinet & Cooling Block -CE marking -Year of construction 2014 -Welding capacity max. 328 KVA -Digital display & control cabinet / IBOX control -Cooling block / water-cooled -Ideal for spot welding of steel/aluminum/stainless steel/titanium -Electrodes wear compensation -Modularity: The system allows the integration of different welding heads and electrode arms -Footswitch Dimensions / Complete system LxWxH 2.5x2.5 x1.8 meters / Weight approx. 1000Kg

used Kromas VM 200 Mass Grinding Machine. KROMAS VM 200 Mass Grinding Machine -Capacity 200 liters - Motor power (kW): 1.1 kW -Inner diameter 980mm -Soundproof cover -Separation facility -Control / ON / OFF / SAVE / TIMER / Stepless speed regulation -Machine feet -Sliding Stones -Documentation Dimensions: LxWxH 1.5x1.5x1.6 meters / Weight 650Kg

used Ercolina Topbender. ERCOLINA TOPBENDER with 2-axis positioning device / 3 meters -CE marking -Pipe capacity 60mm -Bending radius R10-R300 -Bending angle 0-180 degrees -Motor power 1.5 KW -Bending speed 1.25-1.5 rpm -Incl. 2-axis positioning device / 3 meters -2xSet of tools with sliding shoe R100-1-1/4 & R67-25mm -Footswitch -Documentation Dimensions: LxWxH (basic machine) 0.7x0.9x1.4 meters / total weight 220 kg

used Comaca type 130/3mm Notching machine. Notching machine COMACA type 130/3mm -CE marking -Well-maintained original condition -Cutting angle 90 degrees -Work table 600x460mm -Cutting capacity 130mm -Cutting capacity 3mm / sheet thickness -Stroke rate 50-60 strokes per minute -Work table with T-slots/scaling/adjustable angle stops -Foot pedal -Protective device Dimensions: LxWxH 0.7x0.7x1.3 meters / Weight 250Kg

used ROTER BERG Polierbock. RED MOUNTAIN - Polishing Bench -Speed 500 rpm -Chuck diameter 200mm -Tip height 300mm -Drive power 0.75KW -Connection cable Dimensions: LxWxH 0.6x0.5x0.4 meters / Weight: 95Kg

used Weiler Condor. L&Z lathe WEILER Condor -Guided tours "Good" -Optional 3-axis digital display -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/plane feeds -Spindle passage approx. 40mm -Thread/Metric/Inch etc. -Collets / quick-release device incl. 30 x collets -Three-jaw chuck -Multifix with inserts -Swarf back wall -Drill chuck / rotating tip -Emergency / Off -Documentation Dimensions : LxWxH 2x0.8x1.6 meters / Weight 850 kg

used Armin Gries OS 2 Cooling lubricant recycling plant. Armin Gries Cooling Lubricant Recycling Plant OS 240 / KSS Processing Plant -Year of construction 2009 -Feed/circulation pump -Oil separator -Filtration system -Sludge separation -Tank container -Control unit -Return of the cleaned coolant Dimensions: LxWxH 0.6x0.3x0.9 meters / Weight 50Kg

used MicroStep EasyCut 6001.20PG. Inv. Num. : 9193 Type: EasyCut 6001.20PG Producer: MicroStep Created: 2007 Parameters: Motor power: 2 kW Work table length: 6000 mm Work table width: 2000 mm Minimum sheet thickness: 38 mm Plasma Source: Hypertherm HySpeed HSD 130 Machine weight: 2700 kg

used DELTA LC 400. DELTA LC 400 / Rotary Table - Surface Grinding Machine -Magnetic clamping plate (turntable) 400mm -Max. grinding diameter 400mm -Grinding height (distance table - grinding wheel) approx. 220mm -Grinding wheel dimension / standard / 200x80x78mm -Speed / grinding spindle 2840 rpm -Fine adjustment 0.01mm -Distance / column - Grinding wheel axle 315mm -Spindle motor / 3KW -Side grinding wheel puller -Machine enclosure -Coolant device Dimensions : LxWxH 1.2x0.8x1.8 meters / Weight 700Kg

used Weiler Condor VS2 L and Z lathe / CONDOR VS 2. L & Z lathe / WEILER CONDOR VS 2 with new 3-axis digital display from training company -3-axis digital display "NEW" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28 - 2800 rpm -Automatic longitudinal/plane feeds -Spindle passage -Tailstock with tip -Collets / quick-release device incl. 25 x collets -Three-jaw chuck - Röhm 200mm with reverse jaws -Multifix /New with insert -Work light -Emergency / Off -Bed stop -Machine feet -Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

used Weiler Commodor B. Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

used TOS KURIM FSQ 125-S/A3. Control Heidenhain ... TNC 530 Clamping table surface... 3000x1250mm Axis X ... 3000mm Axis Y ... 1000mm Axis Z ... 1400mm Spindle speed... 10-5000 rpm Max. table load... 7000kg Spindle holder ... ISO 50. Number of positions in the tool changer ... 8 Machine weight ... 23000kg Spindle Hunter 30 000rpm Rotary table ISN 1000 CNC V

used Fermat WFT 11 CNC. Control Heidenhain ... TNC 640 Spindle diameter ... 110mm Axis X ... 3000mm Axis Y ... 2000mm Spindle speed ... 10-4000 rpm IKZ ... 70bar Axis W... 730mm Axis Z ... 1250mm Number of positions in the tool changer ... 40 Spindle holder ... ISO 50. Table size... 1400x1800mm Max. table load ... 8000kg Main engine power ... 31kW Machine weight ... 20800kg L x W x H ... 6250 x 5600 x 4450mm The machine is in very good condition, like new. Machine hours: 3,158 Spindle hours: 1,095 Hexagon workpiece probe

used Erfurt 400 ton PEZZ 400/2000. Number of conrods 2 Table dimensions ( x-y/mm) 2000 x 1250 Slide Dimensions X-Y (mm) 1800 x 1000 Stroke (mm) 250 Slide Adjustment (mm) 160 Strokes type adjustable Stroke per minute 25 - 60 Accessories camu feeding line 800 x 4 mm

used GSP 205 R. Column Drilling Machine GSP type 205 R Spindle: Ø 100 mm Cone CM4 Spindle exit: Ø 300 mm Rotation: from 12 to 1800 RPM Table size: 800 x 400 mm Year of construction: 1982 Maxi distance spindle nose/tablein low position: 700 mm Mini distance spindle nose/table: 250 mm Throat depth: 400 mm Cross-table 1150 x 400 mm Drilling/tapping function Automatic spindle advance The manual descent of the spindle is hard (works perfectly in automatic advance) Manual raising/lowering of the table Voltage: 380 V Width: 1300 mm Depth: 1700 mm Total height: 2700 mm Weight: approx 1,5 T

used Gildemeister DMG Deckel M GMX 250S. Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindl ...

Key data: 1 t

used Thommen Swiss Switzerland PR17-CNC / AC. Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

Key data: 1 t

used Thommen Swiss Switzerland PR17-CNC / AC. Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

used Thommen Pfauter Liebherr RT 70 RCA. Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : RT 70 RCA Year of manufacture : 2004 Bosch Control unit Machine has arrived. The machine brings an electronic error. Therefore, the machine is offered in need of repair. The machine comes from the first owner, from a German company. Accessories: according to photos Machine weight approx. [weight]: 1 t Dimensions approx. [size machine]: 140x140x230cm Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from sto ...

used Reinecker Walther Haas WZS 50 CNC. Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Hersteller [manufacturer]: Reinecker Type [ type]: WZS-50 CNC Control unit: Siemens Sinumerik 880G Baujahr[construction year]: 10/1992 Incl. extinguishing system Incl. various accessories Travel axis: X – Y – Z – C – E Interface Type: E32R Weight [weight]: 3000kg Approx. (L x D x H): 3m x 3m x 3m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. ...

used Chiron DMG FZ 16 e. Chiron FZ16e CNC Milling Machine Milling Machine Tool Milling Machine Manufacturer [manufacturer]: Chiron Werke Type [ type]: FZ16e Construction year: 1987 Control unit: Siemens Sinumerik System 3 Travel X/Y/Z approx. 500 × 250 × 425 mm Table size approx. 850 × 550 mm Table load approx. 200 kg Spindle speed 20–7,100 rpm Spindle power 4.8–5.7 kW Tool holder SK30 Tool magazine 12–32 Tools Rapid traverse X/Y/Z approx. 15 m/min Weight [weight]: approx. 3.500kg Good, working condition -without vice -Various accessories available -Monitor new Viewing can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. If you have  ...