construction machines used for sale (3,454)

used Unbekannt BB 1.000 / AA 8.000 mm. TECHNICAL SPECIFICATIONS Manufacturer: Unknown Type: Stationary Wheelbase: 8,000 mm Belt width: 1,000 mm Drive power: 3.0 kW Support: Cantilever

used Haas HTB 1000 x 5100 mm. TECHNICAL SPECIFICATIONS Manufacturer: HAAS Recycling-Systems Description: Take-off belt, Conveyor belt Type: HTB 1000 x 5100 Year of Make: 2010 Wheelbase: 5,100 mm Belt width: 1,000 mm Drive power: 3.0 kW Galvanized: yes Type of construction: Tubular construction

used Haas HTB 1000 x 18500. TECHNICAL SPECIFICATIONS Manufacturer: HAAS Recycling-Systems Description: Swivel Belt Type: HTB 1000 x 18500 Year of Make: 2010 Wheelbase: 18,500 mm Belt width: 1,000 mm Drive power: 5.5 kW Galvanized: yes Walkway: yes, single-sided (width: 800mm) Outrigger: A-support, swivel Type of construction: Tubular construction

used Haas HTB 1200 x 18600. TECHNICAL SPECIFICATIONS Manufacturer: HAAS Recycling System Description: Conveyor belt Type: HTB 1200 x 18600 Year of Make: 2010 Wheelbase: 18,600 mm Belt width: 1,200 mm Drive power: 5.5 kW Galvanized: yes Support: Cantilever Type of construction: Tubular construction

used Unbekannt AA 20.000 / BB 1.000 mm. TECHNICAL SPECIFICATIONS Manufacturer: Unknown Type: Stationary Center distance: 20,000 mm Belt width: 1,000 mm Drive power: 5.5 kW Support: Cantilever

used Longinotti K904. LONGINOTTI K904 — Single-layer press/production line Manufacturer / model: Longinotti K904 Year of manufacture: 2000 Type: single-layer press Manufacturer / model: Longinotti K904 Year of manufacture: 2000 Type: single-layer press OUTPUT PER 8-HOUR SHIFT 250 to 300 m² of slabs per 8-hour shift. Output varies according to operator experience and skill. MOULDS AND OUTPUT PER CYCLE 30 × 30 cm: 4 slabs per cycle. 60 × 60 cm: 1 slab per cycle. 60 × 60 cm raised: 1 panel per cycle. Moulds available for all three configurations. HANDLING AND APPLICATIONS Discharging freshly formed slabs and loading slabs for polishing are two separate operations. The line is designed for conventional slabs and raised access-floor panels. Additional equipment and finishing The following equipment is available to complement the press for preparation,  ...

used TESTBAGGER TB-2. TEST ENTRY (normal) – please ignore. Internal test from 12.11.2026.

used Hanomag D 700 D. Crawler/ Bulldozer Hanomag D 700 D Year of manufacture 1983 + 17,499 operating hours 150 kW approx. 21.8 t Rear ripper Shield in need of repair: drive on the right is defective Drive shaft seal of the injection pump leaks ! Sale only after viewing ! Net price ex location 9,900,-- € + VAT Sale from location D - BL Saxony-Anhalt Code No. O24

used HGT Sortiergreifer 800 Liter. 2 pieces of multi-shell grapple/ sorting grapple 800 litres Gripper 1: without bolt & cylinder Gripper 2: without slewing mechanism otherwise good, operational condition Sale against bid from location D - BL Saxony Code No. O57

used BLEND E050 Diesel. BLEND E050 Diesel 2023, < 100 BH ---- Diesel 44 kw 2 x Supplement 2x surcharge scale (belt scale)(=certifiable) 1x cement 1x additive 2000 ltr water Conveyor belt hydraulically swivel and liftable Conveyor belt hydraulically telescopic Conveyor belt with slide head and 2x slide Hook lift frame with manual supports Cement silo with manhole Cement silo with siloStorzB pressure shutter connection Remote control Permanent lubrication Working platform Rotating light Work light Pressure washer with hoseRoller Toolbox MyBLEND Remote Assistance More pictures on request.

used Diem-Werke Betonmisch. From a current recycling we offer you a DIEM-Werke concrete mixing plant. Year of Make: 2022 Condition: used Asking price: VHB Original price: 236.500,00 Euro Equipment / accessories / other information: Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 89287 Bellenberg The sale is without warranty Subject to prior sale

used CompAir C200 TS-24 / DLT2703 Compressor. ID3909 CompAir C200 TS-24 / DLT2703 year/Year of construction 2023 approx. 2.600 hours/hours 3.5 t Compressor, max. 24 bar, volume flow 20 cbm/h, ready for use Compressor, max. 24 bar, volume flow 20 cbm/h, ready for use

used Peri Trio WDA 270 x 10 Alu. We offer used Peri wall thickness balancers 2.70m with a 65% discount on the original price of 337.50€ Wall thickness compensation WDA-270 x 10 Alu = 118,13€/pc net Controlled and ready for immediate use. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Company SFS Ulmer Straße 1 89614 Öpfingen Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

used Peri MTF + AT Stripping element MTF and AT Maximo 120. We offer used Peri Trio/Maximo formwork elements 1.20m with a 70% discount. Stripping element TRIO MTF 120 x 30 = 63,90€/pc net Stripping element TRIO MTF 120 x 20 = 55,50€/pc net Formwork element TRIO AT 120 x 5 = €97.80/pc net Controlled and ready for immediate use. The PERI TRIO formwork elements AT (external parts) and MT/MTF (middle sections, some with joint tape mounting) form a system-integrated end formwork system for the PERI TRIO panel formwork If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0 ...

used Peri Trio/Maximo Stripping element MTF and AT 270. We offer used Peri Trio/Maximo formwork elements 2.70m with a 70% discount. Stripping element TRIO MTF 270 x 30 = 126,45€/pc net Stripping element TRIO MTF 270 x 20 = 111,00€/pc net Stripping element TRIO AT 270 x 5 = 198,30€/pc net Controlled and ready for immediate use. The PERI TRIO formwork elements AT (external parts) and MT/MTF (middle sections, some with joint tape mounting) form a system-integrated end formwork system for the PERI TRIO panel formwork If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0 ...

used Doka Framax 2,70m concreting platforms. We offer used Doka Framax concreting platforms 2.70m with an 80% discount on the new value of 1.787,00€ Special net price 357,40€/piece Controlled and ready for immediate use. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Company SFS Ulmer Straße 1 89614 Öpfingen Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

used Doka Framax Xlife- 1,35m. We offer 35 pieces of used Doka Framax Xlife inner corner 1.35m with 80% discount on the new value of 963,00€ Special net price 192,60€/piece The elements are controlled and ready for immediate use. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Company SFS Ulmer Straße 1 89614 Öpfingen Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

used Peri Trio railing post holders. We offer 40 pieces of used Peri Trio railing post holders with a 65% discount on the new value of 60,80€ Special net price 21,28€/piece The railing post holders are checked and ready for immediate use. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Company SFS Ulmer Straße 1 89614 Öpfingen Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

used DAVID D 75. TECHNICAL SPECIFICATIONS Manufacturer: DAVID Description: Vertical impact crusher Version: stationary Type: D 75 Year of manufacture: 1993 / Overhaul: 2007 Drive power: 90 kW Max. grain size of the feed material: 40 mm edge length Rotor diameter: 762 mm Rotor speed: 45 - 65 m/s Revolutions: 1,320 - 1,910 rpm Throughput: approx. 70 - 90 t/h Crushing products: 0 - 2 mm / 0 - 4 mm Weight: 2,700 kg SPECIFIC COMMENT - Including steel construction - Including spare rotor

used SR-STOCKANLAGE MEGA 6000 multi-level storage. ID3904 Used multi-level storage system with handling equipment / Gebrauchte Stockanlage mit Handling SR STICK SYSTEM MEGA 6000-B Year/Baujahr 1999 Designed as a high-performance machine for bush-hammering concrete blocks of varying heights (50–300 mm) with a working width of 1050 mm. This is a standalone continuous-feed system featuring a conveyor belt approximately 7.4 m in length (approx. 2.5 m at the infeed, 1.3 m for the support section, and 3.6 m at the outfeed). It includes a support structure for the hammer assembly, which features an oscillating lateral movement with an adjustable lateral stroke of up to 60 mm. The machine is equipped with one set of rotary hammers and includes a protective cover. Technical specifications: connected load approx. 10 kW at 400 V, 50 Hz; air consumption approx. 80 l/h at 8 bar. Feed speed: inf ...

used Sennebogen 818 serial E. Wheeled excavator / material handler Sennebogen 818 Series E Year of manufacture 2021 + 10,478 operating hours Cummins diesel engine 115 kW MAXCAB cab + SECON + air conditioning + SEKA protective ventilation Claws + Demolition & Sorting Grapple SGR-800.30L 14.9 t good, ready-to-use condition + crack in the windshield Sale against bid from location D - BL Saxony Code No. Q76

used GfA 3PPP 5000/2000. TECHNICAL SPECIFICATIONS Manufacturer: GfA Designation: Inclined circular vibrating screen Type: Wet screening Type: 3PPP 5000/2000 Number of screen decks: 3 pcs. Year of Make: 1992 Drive cable: 22 kW Feed capacity: approx. 180 - 200 t/h Dimensions (length/width): 5,000 x 2,000 mm Screening area: 30 sqm Screen covering deck 1: Synthetic Screen Covering Deck 2: Synthetic Screen Covering Deck 3: Synthetic Strainer pan: available Brewing: available Chute car: available SPECIFIC COMMENT Incl. steel construction and outlet chutes Incl. discharge belt AA 19,000 / BB 500 mm Incl. discharge belt AA 20,000 / BB 500 mm Incl. discharge belt AA 25,000 / BB 620 mm

used KUBOTA U55-4 KGLS2. The Kubota U55-4 is a versatile 5.4-tonne compact crawler excavator powered by a 33.8kW diesel engine. It offers excellent manoeuvrability and reliable performance for construction, excavation, trenching and landscaping work. Its compact dimensions make it suitable for working on confined sites. Equipped with an enclosed cabin and bucket, this machine is a practical choice for professional contractors.

used EVG ATT. One semi new EVG ATT mesh welding line Flexible welding line for the production of standard and special reinforcement panels, from small batches up to large production runs Automatic feeding of longitudinal and transverse wires from coils via synchronised multi-track RA-XE-type rotor straightening lines with single or double wire feeding, equipped with up to 10 rotors Automatic feeding of the cross-wires from rolls via a multiple-needle system specific to the equipment Producción «just in time» de distintos tipos y geometrías de paneles High production speed combined with short changeover times No need to flip panels, as the cross-wires are fed and welded either above or below the longitudinal wires

used 91.000 / 650 mm. TECHNICAL SPECIFICATIONS Description: Land conveyor belt system Wheelbase: 91,000 mm Strip width: 650 mm Drive power: 15 kW Drive type: V-belt Conveying capacity: approx. 180 t/h Discharge height: approx. 1,500 mm Handover: Transfer hood Belt tension: tension slide Top Strap Cover: No Galvanized version: no Segment length: 6,000 mm

used GfA SF 2550 Sand trap. TECHNICAL SPECIFICATIONS Manufacturer: GfA Description: Sand trap Type: SF 2550 Year of Make: 1992 Drive power: 5.5 kW (SEW-Eurodrive) Bucket wheel diameter 2,500 mm Bucket width: 450 mm Number of buckets: 13 pcs. Trough length: approx. 5,000 mm Overall dimensions: 3,200 x 6,500 x 2,700 mm Incl. GfA dewatering strainer Type: ESU 1020 Year of Make: 1992 2 x Friedrich unbalance motors à 1.0 KW

used 34.000 / 650 mm. TECHNICAL SPECIFICATIONS Description: Haldenband Design: stationary, swivelling Wheelbase: 34,000 mm Strip width: 650 mm Drive power: 11 kW Conveying capacity: approx. 180 t/h Drive type: V-belt drive Idler rollers: 3-part trough stations (Obertrum) Support: V-Column Catwalk: single-sided Handover: Baffle plate Belt tension: tension slide Drive drum: 450 mm Tensioning drum: 350 mm Top Strap Cover: No Galvanized version: no

used BRÄUER Förderrinne ZT1500/2700. TECHNICAL SPECIFICATIONS Manufacturer: Bräuer GmbH Description: Vibratory conveyor trough Type: ZT1500/2700 Year of Make: 1998 Number of unbalance motors: 2 pcs. Drive power: 2 x 1.70 kW (Fabr. Friedrich) Speed: 980 rpm Channel width: 1,500 mm Channel length: 2,700 mm

used SBM SF 25-10L Sand trap. TECHNICAL SPECIFICATIONS Manufacturer: SBM Description: Sand trap Type: SF 25-10L Year of construction: approx. 2007 Feed grain class: 0 - 5 mm Max. feed size: 15 x 5 x 5 mm Feed capacity dry material: 85 t/h Feed capacity water: 250 cbm/h Typical products: 0 - 2 mm, 0 - 4 mm, 0 - 5 mm Overflow edge: 4,800 mm Number of cups: 10 pcs. Wheel diameter: 2,500 mm Wheel width: 1,000 mm Trough width: 2,700 mm Trough length: 6,400 mm Speed: 0.6 - 1.2 rpm Weight: 9,500 kg Drive power: 4 kW Transport dimensions (length/width/height): 7,712 x 2,700 x 2,800 mm SPECIFIC COMMENT - High efficiency with minimal energy consumption - Clean product qualities - Robust & durable - Excellent dewatering and reliable application of high-purity sand fractions

used SBM SMR 10/5/4. TECHNICAL SPECIFICATIONS Manufacturer: SBM Mineral Processing Description: Reversible impact crusher Type: SMR 10/5/4 (SMR-1) Year of Make: 2007 Drive power: 110 kW Throughput capacity: max. approx. 80 t/h (depending on feed material) Maximum feed size: 10 to 150 mm Target grain size: 0 - 32 mm Rotor diameter: 1,000 mm Crusher inlet: 260 x 520 mm Number of blow bars: 4 pcs. Weight (crusher): approx. 8,500 kg Feed chute: SBM type FRLM 5/15 Nominal width: 500 mm Nominal length: 1,500 mm Drive power: 11 kW SPECIFIC COMMENT - Incl. drive motor 110 kW - Incl. steel construction and outlet tray

used Unbranded Gantry cranes. Used gantry cranes for sale. Gantry cranes lift and move heavy loads such as machinery, bales, dies and steelwork around a workshop or yard without needing a fixed overhead runway built into the building. Ask us for the safe working load, span, lifting height and inspection history. Any lifting equipment needs a thorough examination under LOLER before it is put back into service. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

used Kleemann Mobiscreen MS21 Bivitec. ID3851 Kleemann Mobiscreen MS21 Bivitec year/Baujahr 2019 approx. 2.100 hours/hours 37.5 t Coarse screening plant with flip-flow screen box, 3 screen fractions, screening concept: coarse screen (top deck) + flip-flow screen (bottom deck), throughput capacity up to 500 t/h, top deck – screen area: 11 m², cut size: 25x25 mm; 35x35 mm; 50x50 mm, bottom deck (flip-flow, self-cleaning) – screen area: 10 m², cut size: 3.5x3.5 mm; 4x19 mm; 8x8 mm, wired and radio remote control, including various screen liners. This is an extremely high-performance combination of a coarse-particle screen (upper deck) and a tension shaft (lower deck). The tensioned shaft is particularly well suited to fine separation cuts (e.g. 2 mm) with damp material, where conventional screening technology no longer works. Thanks to the tensioned shaft technology, the screen ...

used STICHWEH FS2709BL75 Scoop wheel. TECHNICAL SPECIFICATIONS Manufacturer: STICHWEH Designation: Fine sand scoop wheel Design: extended settling trough Type: FS2709BL75 Year of Make: 1994 Solids discharge capacity: approx. 16 cbm/h (25 - 30 t/h) Mixture/water throughput: max. 150 to 200 cbm/h Drive power: 2.2 kW Drive type: electric drive with attached reduction gear Output speed: 3.06 rpm Wheel diameter: 2,700 mm Wheel width: 900 mm Trough length: 7,500 mm Trough length: 2,870 mm Weight: 9,100 kg SPECIFIC COMMENT - Fully functional and ready to use - Main area of application: fine sand with a grain size of 0 - 1 mm and 0 - 2 mm - Proven, extremely robust mechanical engineering quality - Extended calming trough - Low-wear gentle operation

used STICHWEH E 200 S Scoop wheels. TECHNICAL SPECIFICATIONS Manufacturer: STICHWEH Description: Drainage bucket wheel Type: E 200 S Year of manufacture: 1970 (overhauled 1993) Diameter scoop wheel: 4,950 mm Cup width: 900 mm Number of cups: 22 pcs. Throughput: 120 to 150 t/h Drive power: 5.5 kW Gearbox type: STIEBEL flat head gearbox type S19 Total length of tray: 7,000 mm Total width of tray: approx. 4,500 mm Overall height: 5,440 mm Weight: approx. 17 to.

used STICHWEH E 200 S Scoop wheels. TECHNICAL SPECIFICATIONS Manufacturer: STICHWEH Description: Drainage bucket wheel Type: E 200 S Year of manufacture: 1970 (overhauled 1993) Diameter scoop wheel: 4,950 mm Cup width: 900 mm Number of cups: 22 pcs. Throughput: 120 to 150 t/h Drive power: 5.5 kW Gearbox type: STIEBEL flat head gearbox type S19 Total length of tray: 7,000 mm Total width of tray: approx. 4,500 mm Overall height: 5,440 mm Weight: approx. 17 to.

used LIEBCHEN SW 60 Sword Wash. TECHNICAL SPECIFICATIONS Manufacturer: LIEBCHEN Description: Twin Shaft Sword Wash Design: Cross Swords Type: SW 60 Flow rate: 60 cbm/h Weight: 8,100 kg Drive power: 2 x 18.5 kW Drive type: 2 x three-phase spur gear gears Trough dimensions (length × width): 6,000 mm x 2,028 mm SPECIFIC COMMENT - Fully functional and ready to use - Cross Swords - Incl. steel construction substructure

used LSB Stahlbau 6,8 m³ High Dump Bucket. High-dump bucket LSB Stahlbau Oschersleben 6.8 m³ Year of construction 07/2022 Capacity SAE heaped 6,800 litres Width 3,400 mm Cutting edge + reinforced cylinders Picture Volvo/ SW (Volvo L150/ L220 ...) Weight 3,800 kg good, ready for use = little used Net price ex site 15,900,-- € + VAT Sale from location BL Thuringia Code No. Q48

used Schaeff HT12 Attachment excavator. Mounted excavator Schaeff HT12 with backhoe bucket 60 cm with teeth 1.25 t Transport dimensions Length 5.5 m x Width 2.0 m H 2.1 m Good, operational condition Net price from the site € 2,400,-- net Sale from location D - BL Saxony-Anhalt Code No. Q55

used Simec Wire 01-MOB. ID3895 Simec Wire 01-MOB year/Baujahr 2018 Mobile Single-Wire Saw mobile mono wire saw

used OMP Water treatment. ID3893 OMP Water treatment / Wasseraufbereitung year/Year of construction 2008 Water treatment Water treatment