mills used for sale

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width optionally as an open 3- or 7-blade rotor Drive motor 110 kw Folding device with electric winch

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

Dreher Delta 20/40 granulator for the size reduction of injection mouldings or hollow plastic bodies with a medium cross-section, rotor diameter 200 mm, working width 400 mm, 3 rotor blades and 2 stator blades, infeed opening 200 x 400 mm, cyclone and bagging opening with a diameter of 304 mm, capacity 40-180 kg/h, electrical connection 400V/50Hz, connected load of granulator 7.5 kW, connected load of extraction 0.75 kW, connected load of control unit 1.0 kW, machine floor space approx. 2500 x 950 mm (WxD), machine height approx. 1950 mm, machine net weight approx. 800 kg

Specifications: Brand: Hosokawa Alpine Model No.: 40/63 RO Type: Industrial Blade Shredder Mill Cutting chamber: 630 x 400 mm Rotor: Open Blades: 3 x 3 Year: 2008 Engine: 60 hp (44.13 kW)

Specifications: ✅ Brand: Hosokawa Alpine ✅ Model No.: 40/63 RO ✅ Type: Blade Crusher Mill ✅ Cutting chamber: 630 x 400 mm ✅ Rotor: Open ✅ Blade system: 3 x 3 ✅ Year of manufacture: 2008 ✅ Engine: 60 hp (44.13 kW) ✅ Without electrical panel ✅ No hopper ✅ Robust construction for continuous industrial production

SIZE REDUCTION LINE, including, S.Andrea dual shaft hydraulic shreddert, extraction belt, overbelt metal separator, granulator, screw conveyor, big bag holding structure, cyclon, control panels, offered as is where is

Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022.

Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022.

Opening dimensions: 450x500mm, rotor diameter: 400mm, rotor speed: 450/min, length: 1090mm, width: 1700mm, height: 2120mm, weight: 1.75t, connected load: 22kW, with cyclone separator and documentation, decommissioned since 2016, on-site inspection is possible.

A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available.

Cutting circle diameter: 240mm, cutting chamber opening X/Y: 465mm/330mm, rotor knives: 3 x 2, stator knives: 2, motor power: 5.5kW, throughput: approx. 100kg-160kg/h, machine dimensions X/Y/Z: approx. 1400mm/900mm/800mm. Including feed device (diameter: 96mm, width: 150mm), dancer arm extrusion, angle sensor and vector FU. Documentation available.

Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available.

Two low-speed Zerma beside-the-press grinders are available. 1) Zerma GSL-180/430, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 430mm, rotor speed: 150rpm, drive power: 4kW, number of rotor knives: 45, number of stator knives: 2, min. sieve hole diameter: 5mm, weight: approx. 250kg. 2) Zerma GSL-180/300, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 300mm, rotor speed: 150rpm, drive power: 4kW, number of rotor blades: 30, number of stator blades: 2, min. screen hole diameter: 5mm, weight: approx. 250kg. Documentation available. On-site inspection is possible. Individual sale possible.

A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible.

This grinder has 2 fixed knives and 12 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

Year of construction 2013 Motor power: 7.5 kW Opening width: 450 mm Opening height: 200 mm Rotor diameter: 180 mm Rotor blade dimensions/number: 6 x225 mm, length 450 mm Strator knife dimensions/number: 4 x 225 mm, length 450 mm Knife material: 1.2080 DIN, hardness: HRC 54-56 Dimensions L x W x H: 930 x 730 x 1420 mm Feed hopper: Noise protection damped Cable capacity: up to 140 kg/h Plastic capacity 80 - 120 kg/h

HERBOLD GRANULATOR, SML 450 / 600 S4-2, Suitable for light plastics, Drive 30 kW, Manual feed hopper, Lifting spindle manually operated, Soundproofing,, blower 7.5 kW without cyclone and lines!, 8 mm sieve holes, Year 1991, reconditioned., installed power Kw: 30

VECOPLAN 4-SHAFT PIPES SHREDDER, VRZ 6000, Total installed power 111 kw, Drive 2 x 22 kW 1 x 30 kW and 1 x 37 kW, 1200 mm x 1100 mm, repaired but without feed device, nor control, Year 2002, installed power Kw: 111

OPEN MILL MACHINE

This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

Specifications: ✅ Brand: Previero ✅ Model No.: MU-408 ✅ Cutting chamber: 800 x 380 mm ✅ Rotor: Closed, inclined cut, water-cooled ✅ Engine: 75 kW (100 hp) ✅ Ideal for continuous work and high-density materials Common Applications: Shredding of technical plastics, purges, thick sheet, pipe, large parts Integration into recycling or extrusion lines Suitable for materials such as PP, PE, PET, PVC, ABS, PA, among others High production capacity with excellent crushing quality

Granulator - Wittmann M2/CM5 (5 pcs.) Year of Make: 2011 Description: Slow-Moving Granulator with Gearbox Power: 1.1 kW 2 stator blades, 2 x push, rotor with the milling cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Wittmann J1/CJ5 Year of Make: 2008 Description: Slow-Moving Granulator with Gearbox Power: 1.5 kW 2 stator blades, 2 x push, rotor with the milling cutters Hopper inlet: 380x330 mm Grinding chamber opening: 230x220 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request