printing machines used for sale (5,016)

used Agga ST 125SX Plate stackers. Agfa ST 125SX Plate Stacker

used KBA Rapida 74-5. -Year 2003 -Only 44 mil. impressions -Max size 52x74 cms. / Straight machine 5/0 -Min size 21x29,7 cms. -Colortronic table control for remote controls, preset of the paper size -Rollers, impression cylinders and blankets automatic washing devices -Semi automatic plate change SAPC -Varidamp alcool dampening -Technotrans alpha D refrigeration system with Alcolsmart AZR -All accessories and parts -In production, any test is possible

used HEIDELBERG S Cylinder Punches. Punching cylinder 50 x 70 cm 1955 Machine No.: 5692 On stock available: immediately located: Germany

used Komori S 228. KOMORI S 228 -Year 1998, Only one owner -Two Colors max paper size 520x720 mm (20.48x28.34") , STRAIGHT machine -Min paper size :230x305 mm (9.06x12") -Image area :510x710 mm (20.1x27.95") -Plate size :600x730x0,30 mms. -9 mil. original impressions Equipped with : -Quick action plate clamps -Komorimatic Alcool Dampening with Technotrans refrigeration system -Low Pile delivery, Stream feeder, Powder spray , Double sheet control -Air compressor, current transformer 220/380 Volts -All chromed cylinders, without damages -Included : all manuals, tools and accessories, Plate punch -In production, available at the end of December

used WT-Wickeltechnik WFKA. Technical Specifications: • Working width: 1050 mm • Unwinding diameter: 1250 mm • Rewinding diameter: 800 mm • Shaftless unwinding • Shear cutting system • Pneumatic knife holders • Fully automatic knife positioning • Turret rewinding with automatic roll removal • 3" friction shaft • Generator brake on unwinding • Unwinding tension control via dancer system • Web edge control Equipment & Features: • Labeling device • Vacuum splicing table • Siemens S7 control system • Removal stand with push-off device • Automatic roll removal

used KAMPF CS 104A. 1978 - recently modernised TECHNICAL DATA: • Max. web width: 1450 mm • Max. unwind diameter 1000 mm • Max. finished reel diameter 400 mm • Hydraulic reel lifting • Circular slitting system • 4 Rewind shafts on two turrets • Pneumatic brake • Length measuring and control system • Optical edge control Machine is completely overhauled, has got new AC Motors, new cabinet and panels; new PLC Siemens S7; new Montalvo pneumatic brake and controls; new edge control for detecting from top and bottom with.

used Esko CDI Spark 4835 Optics 15. Technical specifications: Data format: TIFF or LEN Maximum supported plate size: 1200 × 900 × 1.14 mm Imaging resolution: 2000–4000 ppi Optics: R Optics Maximum screen ruling: 200 lpi Tonal range: 1–99% Optics configuration: Optics 15 Productivity: 1.5 m²/h Dimensions & Weight: Width: 2090 mm Depth: 1168 mm Height: 1223 mm Weight: approx.1500 kg Electrical Data: Power supply: 1/N/PE, 220–240 V AC Frequency: 50/60 Hz Power consumption: 2.6 kW Building fuse: 16 A Residual current protection: >30 mA Grounding required Included Equipment: • Exhaust system • Vacuum pump • Compressor • Monitor • Keyboard • Mouse • Built-in software

used ETI Cohesio with ABG turet rewinde. multifunctional equipment that allows self-adhesive materials and labels 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and gravure unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls Chiller Working hours 8872 Year of production 2006 more information on request

used HEIDELBERG Suprasetter A75 GEN III. - Single Autoloader - 204.000 plate exposures - APOGEE Prepress - Prinect Shooter - PlateStacker

used HEIDELBERG Stahlfolder TI 52/6/4. - Flat pile feeder - Tremat - 1. Station with 6 buckles - 2. Station with 4 buckles - Stream delivery SKP-66, 2008

used KBA Mailander 460 Complete metal sheet coating line. Complete coating line including: Feeder Mailander 460 coater, year 1981 GAS oven 30m, year 2000 Double stacker Bundle turner Max sheet format 1145x980 Upgraded with pneumatic system for feeding

used Heidelberg SM 74-5-H. Reference ID: PP-52969 Category: 5-Colors Manufacturer: Heidelberg Model No.: SM 74-5-H Year Built: 2000 Colors: 5 Impressions: 297 million Working Hours: – Speed: – Max. Sheet Size: 52 x 74 cm Min. Sheet Size: – Condition: Good Location: Europe Availability: Immediately Machine Description: 5 colors 297 million impressions Straight press Preset system Anti-static device on feeder and delivery Alcolor continuous dampening system Technotrans cooling and re-circulation unit CPC 1.04 CP-Tronic control system Remote inking, dampening, axial, circumferential, and diagonal register control with light pen Chromed impression and plate cylinders Automatic washing for rollers, blankets, and impression cylinders Semi-automatic plate loader Bacher Control 2000 register system IR dryer system

used Ryobi 754. Reference ID PP-61604 Category 4-Colors Manufacturer Ryobi Model 754 Year Built 2007 Color 4 Impression: 26 Max. size 788 × 600 mm Condition Good Location Europe Availability Immediately Machine Description 4 colours, straight printing RYOBI PCS-G Printing Control System with touchscreen interface. RYOBI RPC semi-automatic plate changing system. Automatic blanket and ink roller washing systems. RYOBI Program Inking. Remote plate register adjustment: vertical, lateral and diagonal. Oscillating bridge roller. Grafix anti-set-off powder spray system. High-pile delivery and standard accessories. impressions 26 millions

used Nagel Rilnak Duo. A Nagel Rilank duo in excellent condition. Can ship worldwide.

used POLAR RESERVE KNIFE FOR POLAR 92E. 1X RESERVE KNIFE FOR POLAR 92E Format (cm): 92

used IMPERIA VACUUM TABLE. (for processing large plates) Equipment / Additional information: The plates are fixed to the table using a vacuum.

used NESCHEN COLDLAM 1650 LAMINATOR. S. No.: 6037409-120 Equipment / Additional information: max. 1650 mm working width wide range of material and high flexibility maximum speed of 8 m/min for increased production capacity electrical nip adjustment of 40 mm for precise operation heated top roller (70°C) for superb lamination performance variable roller technology for better processing of soft substrates flip up infeed table to facilitate easy setup pull-out trough for easy feeding of single prints up to 10 m additional control panel at the rear of the machine roll to roll built in outboard brakes for a better control of material unwind robust model range Safety: foot switch for hands free operation self-checking safety eyes for increased operator safety removable finger guard ledge CE certified

used KALLFASS COMPACT 650 S MIT UNIVERSA 500 SHRINK TUNNEL. SHRINK TUNNEL KALLFASS COMPACT 650 S WITH FOIL PACKAGING MACHINE UNIVERSA 500 M. No.: BE 05.20.1920 // Commission No.: 25.156.72 Equipment / Additional information: WITH FOIL PACKAGING MACHINE UNIVERSA 500 (M. No.: M 05.20.1614 // Commission No.: 25.156.72) Technical Specifications Adjustable working height: 800 – 900 mm Tunnel opening width and height: 650 mm, 200 / 400 mm Length of heated tunnel hood: 1200 mm Power supply: 208 – 480 V Temperature: continuously adjustable up to 190°C Conveyor speed: 5 – 17.5 meters/minute Installed heating power: 13.5 kW Advantages Suitable for PE and PO films Maintenance-free plastic modular belt Consistent heat transfer for perfect packaging results Efficient energy recirculation via ring-nozzle heating technology High-quality insulation and compact design for ra ...

used HORIZON VARIABLE TRIMMER HT-1000V THREE-KNIFE CUTTER. S. No.: 011001 Equipment / Additional information: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg ...

used BUSCH SV 1040 B 000 INXX COMPRESSOR. M. No.: PD01900101 Equipment / Additional information: Ultimate pressure: 120 mbar

used PERNUMA 1485K CREASING MACHINE. M. No.: 3101 Equipment / Additional information: Format: 70 cm

used BAUMANN 6N. Automatic pile unloader Age 2000 Maximum sheet / layer format: 1050 x 1450 mm Maximum layer weight: 300 kg Minimum pallet height: 130 mm on stock available: immediately located: Germany

used Baumann BSB 6L. Automatic pile unloader Age 2000 Maximum sheet / layer format: 1050 x 1450 mm Maximum layer weight: 300 kg Minimum pallet height: 130 mm on stock available: immediately located: Germany

used Tünkers FAS 480. Tünkers FAS 480, semi-automatic packaging aid for folding carton gluers, Box width 40 - 420 mm, box length 40 - 480 mm, right delivery, frequency-controlled drive, vibrator, for carton, E- and B-flute. Overhaul 2026: cleaned, checked, painted and new belts

used Hefter V9000 Burster/decollator/sorter. A production ready Burster -decollator Hefter Systemform with auto paper feed. Available immediately.

used KBA Mailander 466 Metal sheet complete coating line. Feeder Mailandet 466 coater LTG oven Incenerator Double stacker Full electric upgrade in 2024 Max sheet format: 1145x960 Up to 5,500 sheets per hour

used KBA Mailander 162 Metal sheet decorating decks. Two printing decks Mailander 162. Max sheet format: 1145x960 Feeder, TGX, Dampening system + ink control desk

used LTG Tunnel oven from printing line. GAS Tunnel oven 17 meters with 1 burner. Constructed in 1989.

used Fuji Shiko Delta B-100. Fuji Shiko Delta B-100 label printing and finishing machine, built in 1983. Production of blank labels as well as 2-, 3- and 4-color printing. Maximum web width 230 mm, maximum printing width 220 mm. Equipped with GEW UV system, built in 2007, hot foil stamping, laminating unit, individual cutting, winder and slitter. Two alternatively usable flat die-cutting systems: classic flat die-cutter for strip steel cuts and flat die-cutter with Kocher+Beck magnetic foundation, built in 2018, for flexible die-cutting plates. The Kocher+Beck magnetic foundation includes approx. 120 die-cutting plates that are intended exclusively for this Delta B-100. Extensive original documents and technical documentation available. Operating video available. Optional COMBITYPE plate washer with spare heater, spare vacuum film, a set of UV lamps and existing sheet mat ...

used Shiki PC-45M. Shiki PC-45M label printing machine, built in 1983, M/C No. 345. For 2-, 3- and 4-color printing. Maximum web width 270 mm. Heatset drying with hot air. Equipped with winder and 12-inch perforated edge Remaliner. Extensive original documents and technical documentation available. Optional COMBITYPE plate washer with spare heater, spare vacuum film, a set of UV lamps and existing sheet material Dantex WF 95 DHX 4, 407 × 600 mm. The machine can be used for Shiki PC30, Shiki PC-45M and Delta B-100, but is only available once and can therefore only be sold with one of the three machines or separately. Subject to availability. Immediately available.

used Shiki PC 30. Shiki PC30 label printing machine, built in 1983. Letterpress for the production of blank labels as well as for 2- and 3-colour printing. Maximum material width 180 mm. Hot air drying. Winding and cutting unit available. Machine is fully functional, currently still connected and can be viewed and demonstrated by appointment. Operating video available. Extensive tool inventory with several thousand strip steel cuts/punching tools in systematic drawer storage. Numerous different formats and designs available. Optional COMBITYPE Plate Washout with Replacement Heater, Spare Vacuum Film, a Set of UV Lamps and Existing Dantex WF 95 DHX 4, 407 × 600 mm Plate Material. The device can be used for Shiki PC30, Shiki PC45 and Delta B-100, but is only available once and can therefore only be sold with one of the three machines or separately. Subject to availability.  ...

used Rotopress (Nilpeter) Flexomaster 280. Rotopress Flexomaster 280 label printing machine, built in 1989. 5 printing units, heatset with hot air drying, maximum material/web width 280 mm, maximum printing width 250 mm, 2 rotary punching units, BST web edge control and laminating unit. Extensive range of accessories and tools: 63 printing cylinders, 11 magnetic cylinders, 9 anilox rollers and other punching, perforating and cutting tools. Several hundred punching tools available in various formats. The overall package also includes AB Graphic/Burton 310 slitter/rewinder, B. Bunch Model 590 folding unit, delivery table, Speedmounter plate assembly device and Arcotec Corona HS15. The machine is fully functional and currently still connected. Inspection and test run possible by appointment. Operating video available. Extensive technical documentation available. Immediat ...

used Heidelberg Cylinder S. Heidelberg Cylinder OHZ year 1968 size 54 x 72 cm for cutting good condition

used Heidelberg SORMZ. Year: 1976 Conventional dampening

used Heidelberg SORM. Year 1999 Conventional dampening

used Karl Krause E120. Very well preserved bookbinder cardboard scissors, knife without damage. Cleaned and tested. Cutting length 120 cm

used HEIDELBERGER OHZ. Format 54 x 72 cm, good condition, without damage

used KBA Mailander 162, 460. Complete metal sheet printing line with in line coater Double color printing units - Mailander 162 In line coater Mailander 460 30m tunnel GAS oven Sheet size: 45x38 inches Capacity: 5000 sheets per hour

used PROFILINE Profi-Line R-320 Semi-rotary die-cutting unit. Semi-rotary die-cutting unit Brand: PROFILINE Model: Profi-Line R-320 Year : 2016 Speed: 90 m/min WINK cylinder is brand new and unused

used Horizon 504 AKT. Folding machine Horizon 504 AKT 4 fold pockets + 1 bar