granulation plants used for sale

Recycling machine trade AGICOM- Pedergnana OG: The Easy 120/180 is a high-performance recycling system for the extraction of copper and/or aluminium from old and residual cables. The machine is characterized by a small footprint, simple operation and low energy consumption. Feed material: Electrical cable without impurities Throughput: approx. 60 to 120/180 kg/h

DREHER HEAVY DUTY GRANULATOR, (photos taken before reconditioning), One machine from heavy scraps to regrind, S 60-65 SRV GF, Infeed 650 x 600 mm., solid rotor 650 mm wide 600 mm Ø, n.8 rotating knives, n.3 still knives, throughout rate 500-1.500 kg/h depending on screen, 75 kw drive, NEW electric panel, screen : bespoke to project, Machine totally reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of blower, pipes, etc., Total dimensions: LxWxH 1,36 x 2,8 (3,3 open) x 3.64, This is a hevy duty granulator especiallly constructed, for the efficient granulation of thick walled plastic parts such as, lumps, chunks, plates, pipes. One machine does the job with great saving!, It can handle very heavy parts without need of pre-shredding, installed power : 75, HIGHLIGHTS: HEAVY DUTY MACHINE

Recycling machine trade AGICOM-Pedergnana OG: The T150 cable recycling plant is suitable for the recovery of copper and aluminium from electrical cables. The T150 is equipped with an integrated turbine mill and also with a zig-zag separator - a novelty in this size! Due to these integral components, the T150 system is also ideally suited for the processing of mixed and stranded cables, as well as data conductor or EDP cables. Specifications Feed material: Mixing cable iron-free Throughput: up to approx. 150 kg / h

photos taken before reconditioning, Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.2 screens Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery)

Recycling machine trade AGICOM- Pedergnana OG: Cable recycling plant used consisting of single-shaft shredder MR1740; Granulator CGM4050; Zig Zag Separator; Turbine mill Ghibli 352; separator, filter tower; Throughput approx. 300 kg/h. Details on request!

TRIA GRANULATOR 42-20 BLT, (machine offered totally reconditioned - photos taken before reconditioning), infeed 340 x 200 mm., grinding surface 420 x 200 mm., Siemens a.c. 4 kw drive, n.3 rotating knives, n.2 still knives, 5 mm screen holes (or bespoke), extraction with drawer, INSTALLED POWER: 4 kw, rotor size: 400 x 200 mm.

For sale is a cable granulating system. The machine will be available from August. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 36 kW Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Power: 300 350 kg / h the performance depends on type of cable Operation guarantee: 1 month The cable granulating system is suitable to various kinds of copper cables. The diameter of the cable can have up to 20 mm. Kabelschredder is very easy to operate and is very economical. You can recover up to 99.8% of the copper from the cable. Demonstration machine costs â?¬29,000 gestezliche Net VAT The offered machine is tested prior to sale min a month. New costs â?¬35,000 net On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must  ...

Drying, blending, degassing, agglomerating system for plastic materials and more Automatic process. No operator needed. Italian technology and material quality standards. Used machine reconditioned Very versatile, can be used for a variety of applications: PAPERMILL PULPER, MIXED PLASTICS, but also ORGANIC MATERIALS to be dried and compacted, PEAT SUBSTITUTE, etc. Output is a continuous stream High ROI Installed power 400 kw – average power consumption 260 kw/h Low maintenance costs Ideal for 24/7 shifts On this link you’ll see the machine connected to an extruder: https://youtu.be/Q3Ayg62mfh8

recoem GDS-460 Challanger with air filter tower and turbo mill Year of construction : 2021 Condition : New Power : 22,5 kW motor Total power : approx. 48kW Throughput : 400kg/h Accessories : 2,3,4,5,6 hole sieve Dimensions : LxWxH 3000x1500x2200 mm Total weight : 3600 kg Rotor dimensions : L x diameter. 460x400 mm A compact recycling plant Model Challenger GDS 460. Single shaft cable breaker with 15 rotating 2 fixed knives. The design and precision of the cutting chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, simply contact us.

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 4 operators per shift, required space : about 45 x 25 mt., calculated on a 220 days/year 8 h/day = 7.040 T/year - 16 h/day = 14.080 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 4Ton/h in input, (throughput rate depends on feeding rate and on the kind of tires), installed power : about 900 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return oversized material to shredder, n. ...

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), type XT 9042, 900 mm wide rotor, Sturdy and reliable machine from this well renowned Italian manufacturer, 30 kw drive, n. 3 rotating knives + 2 still knives, screen 12 mm., prepared for extraction through blower, control panel, constructed in 2016, the machine is offered totally reconditioned, can be completed with conveyor belt, pneumatic extraction, bag filling/weighing station., Constructors description for the XT series: Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, also suitable for second step grinding of pre-crushed pieces.The granulator of this series, thanks to the special design of the cutting chamber, are also widely used for an immediate and safe in-line grinding of film and trims. The rotary discs integral with the roto ...

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

TRIA GRANULATOR 100-65DN, (machine offered totally reconditioned - photos taken before reconditioning), Open rotor length 1.000 mm., Ø 650 mm., n.3 rotating knives, n.2 still knives, 75 kw.drive, Electric cabinet, Constructed in 1996, offered FULLY RECONDITIONED, INSTALLED POWER: 75 kw, rotor size: 1000x650 open

Motor 75 kW Rotor blades: 5 Stator blades: 2 Rotor diameter: 600 mm Bu9dtai0he Rotor width 780 mm Inlet opening: 720x780 mm

FOLCIERI GRANULATOR, rotor width 1.000 mm.39.37, rotor Ø 530 mm.20.87, granulating chamber 1.000 x 700 mm., n.3 rotating knives, 2 still knives (+ 3 spare sets of knives), 110 kw drive, blower, sound-proof cased, electric cabinet, constructed in 2001, offered totally reconditioned, possible supply of conveyor belt, See how we recondition [HERE](.germanplast.eu/pages/photo-gallery), installed power : 110

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

TRIA GRANULATOR XT 100-80, (machine offered totally reconditioned - photos taken before reconditioning was completed), - Granulating chamber mm.1.040800 (40,9431,50”), - 110 kw drive, - New rotor, diam 620 mm (24,41”) 1.000 mm.wide (40), - N.5 Rotor knifes, - N.2 Fixed knifes, - Electrical hopper opening, - Blower and cyclone Included, - new electric panel, - rotor bearings, motor bearings replaced, - 12 mm dima. screen (or bespoke), - constructed in 2004, - see how we recondition at [Germanplasts](https://www.youtube/watch?v=BCW07AKu-F8), Power: 110 kw, width: 1.000 mm.(40), Knives: 5 R+2S

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

TRIA GRANULATOR, Mod. JM 42-20, Construction year 2016, Input: 210 x 415 mm, Cutting Chamber Size: 200 mm x 420 mm, 3 Kw drive, Rotating Blades: 3, Fixed Blades: 2, Screen Hole Size: 5 mm, Average throughput rate: 50 - 80 Kg/h, Collection drawer, Prepared for extraction blower (not included), installed power : 3

Herbold granulator Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

(machine offered totally reconditioned - photos taken before reconditioning), TRIA PRR100 GRANULATOR, rotor width 1.000 mm., closed rotor diam.650 mm., n.5 rotating knioves, n.2 still knives, 110 kw drive, hopper mm.600 x 1.000, The machine is offered TOTALLY RECONDITIONED, NEW control panel, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery)

Used, heavy and high-performance recycling plant for the recycling of old cables. The machine has a granulator with a knife length of 500 mm and a large cutting table. As a result, the Sincro 530 from Guidetti achieves hourly outputs of 450 to 600 kg (manufacturer's specs). The system was traded-in by us and all essential components were checked in the workshop. The machine works reliably and trouble-free. On request, the system can be equipped with pre-shredders and conveyor belts. Feel free to visit us and get your own impression of the machine. You are also welcome to test the machine with your cable material.

TRIA GRANULATOR, Mod. JJM 42-20 SL, Construction year 2014, Feeding Mouth Size: 210 mm x 415 mm, Cutting Chamber Size: 200 mm x 420 mm, Motor Power: 3 Kw, Rotating Blades: 3, Fixed Blades: 2, Grille Hole Size: 5 mm, Orientative Production: 50 - 80 Kg/h, Material Extraction: Collection drawer with hole for suction., installed power : 3

Thanks to the integrated turbine mill, thin cables and fine stranded cables can also be processed. The pelletizing mill has 24 individual knives arranged evenly over the circumference with which the machine is also well suited for direct insertion without pre-crushing. The separator works very sensitively by adjusting the speed of the fan and is therefore also perfect for stranded cables. A bypass has been retrofitted for processing pure hard cable quantities, which reduces the power consumption and increases the performance of these cables. The integrated control allows the connection of a conveyor belt directly via a 400 V plug. The conveyor belt connected in this way is temporarily stopped when the performance limit is reached so that the system is not overcrowded. In addition to the bypass, the system has also received a stand filter from us, so that the frequent emptying of  ...

TRIA GRANULATOR, Mod. 46-25 TD-SL, Construction year 1990, Tria Granulator complete with Blower for material extraction and Powder Cyclone, Feeding Mouth Diameter: 470 x 435 mm, Cutting Chamber Diameter: 470 x 250 mm, Motor Power: 7.5 Kw, Rotating Blades: 6, Fixed Blades: 2 - new, Grille Hole Size: 9 mm, Average throughput rate: 50 - 80 Kg/h, Extraction drawer, prepared for blower extraction, installed power : 7.5

Machine for processing mixed old cables including fine conductors and stranded cables, Due to the special rotor system and the large flywheel masses, the system is also suitable for operation in manual insertion. The machine is equipped with a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different screens.

TRIA GRANULATOR, Mod. JM 42-20 SL, Construction year 2014, Feeding Mouth Size: 210 mm x 415 mm, Cutting Chamber Size: 200 mm x 420 mm, Motor Power: 3 Kw, Rotating Blades: 3, Fixed Blades: 2, Grille Hole Size: 5 mm, Average throughput rate: 50 - 80 Kg/h, Extraction drawer, prepared for blower extraction, installed power : 3

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

TRIA GRANULATOR, Mod. 42-20/JM, Construction year 2012, Feeding Mouth Size: 210 mm x 415 mm, Cutting Chamber Size: 200 mm x 420 mm, Motor Power: 3 Kw, Rotating Blades: 3, Fixed Blades: 2, Grille Hole Size: 5 mm, Average throughput rate: 50 - 80 Kg/h, Extraction drawer, prepared for blower extraction, installed power : 3