other wood working machines used for sale (1,371)

COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – built in 2011 For sale is a complete waste wood disposal plant of the Rudnick & Enners brand, built in 2011. The line consists of 20 positions and was used for the automatic removal, sorting and processing of rinds, chips and waste wood in a sawmill. The plant has a modular design, dismantled, in very good condition and immediately available. Technical Overview – Items 1 to 20 01 – TKF offset by reducer, W 600 mm 02 – Viborinne 1 trimming line, L 13.0 m, W 650 mm 03 – Viborinne 2-trimming line, L 15.0 m, W 650 mm 04 – Viborinne creel line, L 8.50 m, W 500 mm 05 – Viborinne 1-gang line, L 10.0 m, W 500 mm 06 – Viborinne 2-creel line, L 9.0 m, W 500 mm 07 – Viborinne creel roller table, L 7.50 m, W 500 mm 08 – Viborinne resawing line, L 11.0 m, W 650 mm 09 – Viborinne recut li ...

Packing system loaded onto trucks Timber length 3-5m (5.5m) Composed of: Tilting table Alignment roller conveyor Board Splitter Layer conveyors Handovers (5 pieces) Lift table Transport... (Without control cabinet)

Technical data sheet: Esterer EHS-F tensioning car (built in 1990) Application: Automatic feeding of sawmills with round timber 1. Key features Type: EHS-F (semi-automatic, rail-guided) Year of Make: 1990 Condition: [Good/Refurbished/Technically perfect – please adjust] Application: Sawmills, wood industry 2. Performance data Load capacity: 5–8 tons (depending on trunk diameter) Conveyor length: 10 m (standard, adaptable to creel length) Conveying speed: 0.1–0.4 m/s (infinitely adjustable) Trunk diameter: Ø 200–800 mm Drive & Control Drive: Electro-hydraulic (400 V / 50 Hz) Hydraulic pump: 25 l/min (pressure: approx. 160 bar) Control: Relay-controlled (option: retrofitting with modern PLC possible) Operation: Button panel with emergency stop Mechanics & Safety Clamping system: Hydraulic grippers (jaws replaceable) Chassis: Precision rail guide with ...

Pinomatic cross conveyor for a planing and sawing line Year of construction 2001 Manufacturer Pinomtatic OY Type POS 9+10 S/N P1033 motorised cross conveyor with 7 chain hoists length of the arms: : 6000mm Width of the cross conveyor up to 4000mm ( variable adjustable ) Height: 900mm 6 chain hoists fixed mounted 1 chain hoist can be variably adjusted Voltage 230/ 400VAC

Edgebander manufactured in 2014. This BIESSE AKRON 1330 features a panel thickness capacity of 10–60 mm and edge thickness capabilities for rolls from 0.4–3 mm and strips up to 5 mm. It operates at a feed speed of approximately 12 m/min and includes a touch-screen operator panel for easy control of glue temperature, panel height, trimming unit, and machining changeover. If you are looking to get high-quality edging capabilities, consider the BIESSE AKRON 1330 machine we have for sale. Contact us for further details.

Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Radial fan: Extraction blower, explosion-proof fan -Engine: VEM 3.6 kW 1430 rpm -Volume flow rate: m³/h -Inlet connection: Ø 420 mm -Outlet connection: Ø 450 mm -Fan wheel: Ø 660 x 250 mm -Overall dimensions: 1500/900/H1180 mm -Weight: 180 kg

Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan EX protected -Motor: AEG 7.5 kW 2935 rpm -Connection: Inlet Ø 160 mm -Connection: Output Ø 140 mm -Fan wheel: Ø 700 x 50 mm -Volume flow rate: m³/h -Dimensions: 890/760/H960 mm -Weight: 180 kg

Code: 0492 Brand: COMAFER Model: MAC 300 SUPER - CE Standard Shredder for wood waste, pallets, paper, cardboard, plastics and other types of materials – CE Standard Technical data: Base made from a sturdy electro-welded steel structure Loading hopper made from sturdy electro-welded steel structure Electrical control panel Knife roller to which the reversible and resharpenable knives are attached Screen fixed after the knife roller Output 15–100 kg/h Motor power 5,5 Hp Knife roller dimensions 130 x 450 mm n° 30 knives Screen with grate diameter 10 mm Suction inlet diameter 150 mm Overall dimensions of loading hopper mm 630 x 450 x 850 h Overall dimensions of shredder mm 1230 x 900 x 1350 h Weight kg 500

Auction-ID: A1-50643-110

I sell the Weima ZM30 vertical wood shredder Built in 1995 Cylinder system with 4 shafts. 2 motors 11 + 11KW Only 1850 working hours Condition very good. Available same.

Nail Machine Stitching Machine for Strips Automatic clamping, driving clamps, Cut-off saw, loosen clamps. Glue gun From coffin production 6 Senco MI pneumatic nail guns Drive in clamps using foot switch Insertion length with pressure beam maximum 2000 mm Maximum insertion height 70 mm Maximum insertion depth 80 mm Pressure pneumatically from the front and top Automatic raising and lowering of the staplers Clamps used momentarily: width 10mm, length 45 mm 2 staplers attached to each bracket. Distance is adjustable With automatic cross-cut saw on the right side 45° cut With Glue Grinder Pressure Vessel and glue gun Lamello Frame mobile on castors Dimensions 2700 mm x 1400 mm x H 1600 mm Weight approx. 800 kg

power: 40 - 100 kg/h; briquette dimensions: 60 mm; briquette length: 40 - 70 mm; automatic start-up: yes; oil preheating system: yes; max moisture: 15 %; container diameter: 1000 mm; dimensions: 1850 mm x 1170 x 1510 mm (LxBxH); motor power: 7,5 kW; power panel: with PLC and touch screen Siemens; weight: 770 kg; The briquetting machine is suitable to compact:woodcorkrubberplasticyarn fluffnatural fibreemery powderscrapings from hidespapercoffee husketc.

hourly output: 10 - 25 kg/h; briquette: cube 30mm x 30mm; drum dimension: 0,33 m³; dimensions: 1300mm x 740mm x 1200mm (L x B x H); motor Power: 2,2kW; weight: 233 kg; Very compact construction and economic operation.

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic su ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at ...

flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic s ...