Alimenta Newpack Division Thermoform FM100/E-20 HC form fill seal machine (FFS) for mini-portions of jam with fruit parts / marmelade / honey / choco paste., Mini-portions are the ideal, hygienic way to package portions for use in hotels, aboard airplanes, for catering and for single-person households without compromising on quality and freshness. Less packaging material needed thanks to the use of forming material of minimal thickness, even heating up of the material and accelerated forming process for an optimally controlled and optimally distributed wall thickness, minimal punch waste from the low-waste punch unit, volume-saving, overlapping packing configuration when final packaging into boxes or tray., Working principle: cup material supply from the reel, pre-heating the cup material, forming the cup, date coding inside the bottom of the cup, filling the cup (fruit parts possible, C ...
Blister Machine Manufacturer: Uhlmann Type: B1240 Year of Make: 2006 Equipped for ALU/ALU operation, ALU/PVC prepared Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm Drawing depth max. 18 mm Output 15 - 50 form cycles/min Transport length 42-115 mm Film width 100-168 mm Moulded foil Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), mech. Tension Cover foil Ø max. 240 mm, core Ø 76 mm, mech. Tension Detection of adhesive joints Foil feed by moulds and by seals Printing Mark Control Film stretching of the cover film Crack and pore control of forming film and cover film Visiotec VisioScan MT-160/200 without heating plate station for PVC moulded film (can be supplied on request at an additional cost) Forming station with compressed air for PVC moulding film, prepared for pre-stretching punches Mechanical forming station for ALU forming film PLC ...
Description in German The Uhlmann UPS 300 is a fully automatic blister machine with intermittent feed, suitable for packaging tablets, capsules and dragees in blisters. The machine is configured with two film programs: Program 1 for PP/PVC and Program 2 for ALU/ALU. Control is carried out via a panelware control panel with LCD display and keypad. Manufacturer: Uhlmann Pac-Systeme, Laupheim Type: UPS 300 Year of Make: 1997 Power supply: 3/N/PE AC 400 V, 50 Hz Rated current: 19 A, Fuse: 25 A Connected load: 8.0 kW (peak), approx. 5.0 kW (average) Output: up to 50 strokes/min at 10.0 mm drawing depth; up to 35 strokes/min at 18.5 mm drawing depth Film programs: PP/PVC (Prog. 1), ALU/ALU (Prog. 2) Control: Panel fabric with LCD display and keyboard The machine has been removed from a functioning system and is in good optical condition. • The item may have scratches, abra ...
Blister Machine Manufacturer: Uhlmann Type: UPS4 ETX Year of Make: 2008 Highly flexible blister machine in modular balcony design. The machine has the following standard and optional equipment: Forming foil holder with 2 pneumatic expansion shafts, core diameter 76mm, max. roll diameter 800mm Cutting and gluing table for forming film 3 zones contact heating with 6 individually adjustable heating circuits Heating plates open automatically when machine stops Forming station with 4 columns, lift table guide and pneumatic pre-stretching Filling section 1,360mm long, incl. safety flap Additional safety flap with simultaneous use of a second product feeder Cover foil rinsing with pneumatic expansion shaft, core diameter 76mm, max. roll diameter 300mm Plate sealing station with 4 columns lift table guide, incl. overload protection Automatic lifting of the upper se ...
Ulma TFS 200 S This packaging machine uses two rolls of film to produce skin packaging automatically. Workflow: • Heating of the bottom film (inside the forming station) • Shapes of the pack • Placing the product in the package • Heating the skin top film (for skin application) • Performing skin vacuum and package sealing • Cutting the package crosswise and longitudinally • Package application • Residual film winding Technical Specifications Model: TFS 200 S Condition: Exhibition machine (fully functional) Year of Make: 2025 Capacity: Up to 18 packs/minute Packaging Type: Skin Packaging Machine equipment Free insertion distance 760 mm Features ✅ Format 420 x 230mm 3.1 ✅ Maximum product height 55mm (25mm overhang) ✅ Adapter for foil mandrels to 6" ❌ Label dispenser ❌ Printers ✅ Busch vacuum pump 160 m3/h integrated ❌ D ...
Technical Parameters Category: Used butchering machines Subcategory Hygiene, Packaging & Transport Type of packer Height 1800 mm Width 1100 mm Length 4200 mm Electrical Supply: 400V 50Hz 3N Total power 10 kW Main Material Stainless Steel, Acid Resistant Belt width 425 mm Thermoforma Packaging System Chamber/mold dimensions 165 x 335 mm Description Hajek thermoformer, type: VH30/420-180, 230/400 V, 3 Ph, 50 Hz, 10 kW, Busch vacuum pump, type: RA 0100 F 503, foil width: 425 mm, mold: 165 mm x 335 mm, dimensions: 4200 mm x 1100 mm x 1800 mm
A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Multivac R 145, film width 320 mm, trigger 200 mm, format 2.1, rigid film, MAP. Top condition
A horizontal thermoforming, vacuum and packaging machine from Ulma for flexible and rigid film packaging from the food industry is available. Frame length: 4000mm, working height range: 850mm-950mm, max. film width: 420mm, max. film index: 360mm, max. forming depth: 130mm, max. film roll diameter: 350mm, max. film roll core diameter: 76mm, vacuum pump: Busch R5 RA 0302 D, machine dimensions X/Y/Z: approx. 1050mm/5000mm/1950mm. Including rigid and flexible film rolls. Documentation available. An on-site inspection is possible.
Thermoforming packaging machine (thermoformer, roll packer) characterized by the production of packaging from two rolls of film. Depending on the type of machine and the film used, the packaging can be soft or hard. Machines designed for packaging food and non-food products. Manufacturer: Multivac; Model: R80; Year of manufacture 1985; Working with soft film; Bottom film: +/- 420mm (approx.); Top film: +/- 410mm (approx.); Formats: 1.2; Length: 6000mm; Width: 1000mm; Height: 1800mm; Weight: 1600 kg.
Used blister line from Bosch. The line includes: Tact blister machine type TLT 1560 year of manufacture 1991 Cartoner type C, year of manufacture 1991
A thermoforming machine A&D with a cooling unit is available. Lower film width: 185mm, upper film width: 175mm. Documentation available. An on-site inspection is possible. Expected to be available from the beginning of 2027.
Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)
A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.
Used automatic thermoforming machine for butter packaging from TMCI Padovan type FM80-8 H.C. Packages of 10 grams and 125 grams.
Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power.
Variovac Rotarius semi-automatic tray sealer with a dual-tool system owes its name to its practical rotary table: while the machine vacuum seals and gas flushes trays in one station, the operator can simultaneously remove finished trays and load new ones at the front. This prevents downtime and increases output when packaging a wide range of products from both the food and non-food sectors. Film roll diameter: up to 300 mm. Tray depth: up to 100 mm. Tray depth for skin: up to 40 mm. Product protrusion: up to 25 mm. Packaging output: 4 to 8 cycles/min. Packaging types: MAP, Skin, Sealing. Compressed air: min. 6 bar. Electrical voltage: 7 kW - 230/400 V - 13 A - 50 Hz - 3 Ph. Busch RA 0063F vacuum pump. Control panel with Siemens S7-300 PLC and Variovac Touch screen operation panel. Pallet with foil available., Type of Machine: Tray sealer, Capacity: 4 to 8 cycles/min, Motor: 7 kW - 230/40 ...
Used ILLIG VHW 72/2 Preheater with 2 x electrically heated rolls. Width 720 mm. 380V 50 Hz 3 ph. Heating Capacity 30 kW. Motor 0.18 kW. Total Amps 48 A. Max. Temp. 130.
For Sale: Variovac Primus – Year of Manufacture 2015, more photos will follow soon, currently being serviced., We offer a well-maintained Variovac Primus thermoforming packaging machine, manufactured in 2015, designed for reliable and efficient food packaging applications. This machine is widely used in the food industry for vacuum and MAP packaging of fresh and processed products., Key Features, - Thermoforming packaging machine, - Suitable for vacuum and Modified Atmosphere Packaging (MAP), - Robust industrial design for continuous production, - Hygienic construction, ideal for food processing environments, - User-friendly control system, - Proven Variovac quality and reliability, Applications, - Meat and poultry, - Cheese and dairy products, - Fish and seafood, - Ready meals and convenience foods, - Other food and non-food products requiring high-quality packaging, Condition, - Year ...
2005 Multivac R 240, hard and soft film, film width 355 mm, take-off 200 mm, sandwich preheating, stamps heated, MAP, MC 96-2 control, upper stroke at mould and sealing station, soft and hard film cutting, outfeed belt and residual film rewinder, central lubrication, automatic chain lubrication. Top condition-ready for use.
FAMAR THERMOFORMER, MODEL RM150 Thermoformer for the packaging of various products (tablets, soft or hard capsules, dragees, ampoules). Technical documentation available. Incoterm: EXW PRODUCTION Output: up to 100 blisters/min Film material: alu, paper, PVC Max reel width: 140 mm Max diameter of the thermoformable material reel: 400 mm Max diameter of the covering material reel: 200 mm Max forming depth: 15 mm Spacing: from 50 to 150 mm OTHER CHARACTERISTICS Machine size: 4460 x 1080 x 2260 mm Weight: 2000 kg ENERGY CONSUMPTION Power supply: 380 V + ground / 50 Hz; Absorbed power: 9 kW; Compressed air consumption: 200 l/mn
A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
REF-2662 ILPRA FOODPACK SPEEDY V/G TRAY SEALER Automatic tray sealer. Manufacturer: ILPRA. Series: FOODPACK. Model: FP SPEEDY V/G. Serial no.: FP7291. Year: 2006. Busch vacuum pump. Inert gas. Voltage: 400 V. Max. production (only sealing): 10 cycles/min. Current mould type: 2 round trays of 110 mm diameter. Overall dimensions (mm): 2,870 x 900 x 1,600 (LxWxH). Weight: approx. 700 kg.
ILLIG PLS75b Inline Counter/ Stacker, with Hole Punch Station, age 2006, works Inline with an ILLIG RDM75K for Cups, Flower Pots, Coffee Capsules etc., Max. Stacking Area: 750 x 350 mm, Min Height of formed product: 25 mm, Max. height of Formed Product: 150 mm, Min. dia. of product : Ø 40 mm, Max. dia. of Product: Ø 150 mm, Max. length of Product Stack: 730 mm, Output rate of Product Stacks: 1200 Stacks/ hr, Rotating Head to neatly remove Products from the Thermoformer Mold with integrated suction, Inline Hole Punch Station, Inline Counter Stacker Station, Compressed Air: 0.2 L at 6 bar, approximately, Total Drive Rating: 19 kW, Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE), Cross delivery conveyor station for counted cups., All Motors are Indramat Servo Motors, Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls, Siemens S7 PLC Controls, Delivers Count ...
A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible.
Fully Automatic Thermoforming Machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulds, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, OMRON PLC, touch screen and servo motor, SCHNEIDER relay and air switch. Upper packing materials: heat-sealable films, lower packing materials: thermo-formable, heat seal film, rigid and flexible film is possible. - Specifications: total power: 380V, 13kW | air: 1m?/6bar | vacuum: 0.8-1.0m?/6bar | water: 4 liter/min | max. upper film width: 390mm (practical width 350mm) | length per mould: 200mm | max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film) | loding ar ...
Fully automatic thermoforming machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food such as sandwiches, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulding tool, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, SMC pneumatic components, DELAT PLC and touch screen. - Specifications: upper packing materials: heat-sealable films, max. film width: 400mm | lower packing materials: thermo-formable, heat seal film (rigid and flexible film is possible), thickness: 300 - 900?m, upper film width: max. 400mm + 2mm, max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film) | loading area: 120cm ? 150cm (optional: additional length) | max. speed of the machi ...
Fully automatic thermoforming machine for forming and filling small plastic vials with liquids, creams or pasty products. Specifically designed for use in the pharmaceutical, food or chemical industries. Easily interchangeable modular trays allow the production of vials of different sizes and shapes. Suitable for the production of multiple packs, whose number can be set as needed. Dosing and filling of the filling material is performed by a peristaltic pump, which is characterized by easy operation, cleaning and adjustment. - Specifications: packaging materials: PVC/PE composite film, PET/PVDC as environmentally friendly composite material, PVC/EVOH ultra-high barrier composite film for e.g. pesticide packaging | packaging thickness: 0.25-0.35mm | max. roll outer diameter: 400mm with standard core (70-76mm) | max. drawing depth on one side: 12.5mm | max. molding surface: 120mmx210mm | vi ...
